• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.157-165
• /
• 2001

In the brake systems, it is important to reduce the rear brake pressure in order to secure the safety of the vehicle in braking. So, there was some research that reduced and controlled the rear brake pressure exactly like a LSPV and a ELSPV. However, the previous research has some weaknesses: the LSPV is a mechanical system and its brake efficiency is lower than the efficiency of ELSPV, But, the cost of ELSPV is very higher so its application to the vehicle is very difficult. Additionally, when a fail appears in the circuit which controls the valves, the fail results in some wrong operation of the valves. But, the previous researchers didn't take the effect of fail into account. Hence, the efficiency of them is low and the safety of the vehicle is not confirmed. So, in this paper we develop a new economical pressure modulator that exactly controls brake pressure and confirms the safety of the vehicle in any case using a direct adaptive fuzzy controller.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.125-128
• /
• 2002

The automotive industry have made an effort to reduce the weight of vehicle structures with increased safety, while initial model of the final product does not contain any prehistoric effects in a design stave. It takes lots of time to calculate forming effects that have great influences on the energy absorption of structures. In this paper, finite element inverse analysis is adopted to calculate forming effects, such as thickness variation and effective plastic strain as well as an initial blank shape with small amount of computation time. Crash analysis can be directly performed after inverse analysis of the forming process without remeshing scheme. The direct mesh mapping method is used to calculate an initial guess from the sliding constraint surface that is extracted from the die and punch set. Analysis results show that energy absorption of structures is increased with consideration of forming effects and finite element inverse analysis is usefully applicable to calculate forming erects of vehicle structures for the crash analysis.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.717-728
• /
• 2008

The purpose of this study to examine the relevant factors in tool and fashion of make up. For the study, a questionnaire survey was conducted of 436 women in between their twenties to fifties residing in the Kyeongnam region. Obtained data were analyzed pearson's correlation coefficient and multiple regression analysis. The results of this study were as follows.; The influence on tool and fashion of make up can be described into 4 factors that are included in the decision making process of tool and fashion, in other words, the demographical characteristic, the body cathexis, the need and the clothing value. Among these factors, the beauty need and the political value were proved to be more important. The demographic characteristics, the media contact had a direct influence on tool, and the occupation status had a direct influence on fashion. The body cathexis did not have a direct influence on any subordinate factors of tool and fashion, but had indirect influence having the need as a parameter or had no influence having the clothing value as a parameter.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.125-135
• /
• 2016

Adhesion in geotechnical engineering is the interaction between cohesive soil and a solid surface which can cause clogging in mechanized tunnelling through clayey formations. Normal piston pull out and modified direct shear tests were performed on clayey soil samples to determine which type of adhesion stress, normal or tangential, could be most effectively measured. Measured values for normal adhesion ranged from 0.9 to 18 kPa. The range of tangential adhesion was 2.4 to 10 kPa. The results indicate normal adhesion results were more accurate than those for the modified direct shear test that measure tangential adhesion. Direct shear test on identical samples did not show any correlation between measured cohesion and normal adhesion values. Normal adhesion values have shown significantly meaningful variation with consistency index and so are compatible with the base of field clogging assessment criteria. But tangential adhesion and cohesion were not compatible with these assessment criteria.

• 복식
• /
• 제57권8호
• /
• pp.60-74
• /
• 2007

This study intends to examine the influencing factors in personal intention and show-off of make-up behavior. For the study, a questionnaire survey was conducted of 436 women in between their twenties to fifties residing in the Kyeongnam region. Obtained data were analyzed pearson's correlation coefficient and multiple regression analysis. The result is summarized as follows.; The influence on personal intention and show-off of make-up behavior can be described into 4 factors that are included in the decision making process of personal intention and show-off, in other words, the demographical characteristic, the body cathexis, the need and the clothing value. The demographic characteristics, the marriage status, the occupation status and the media contact had a direct influence on personal intention, and the educational background had a direct influence on show-off. The body cathexis did not have a direct influence on any subordinate factors of personal intention and show-off, but had indirect influence having the need as a parameter or had no influence having the clothing value as a parameter.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.254-258
• /
• 2005

Semisolid process is possible in any material system possessing a freezing range where the microstructure should consist of the nondendritic globular solid phase separated and enclosed by the liquid phase, referred to as semisolid slurry. There are two primary semisolid processing routes, thixocasting and rheocasting. Especially, rheocasting process has become a new focus in the field of semisolid process because of its many advantages such as no special billet required and possibility of in-house scrap recycling, compared with the thixocasting process. In-Ladle direct thermal control (DTC) rheocasting has been developed, based on the fact that there is slurry and mush transition in every molten metal and the transition, which normally occurs in the range of liquid traction of 0.1 to 0.6, could be controlled by controlling solid shape and relative solid-liquid interfacial energy. In this study, A356 Al alloy was investigated to verify In-Ladle DTC rheocasting for obtaining semisolid slurry. Modeling of heat transfer was carried out to investigate the effect of pouring temperature and ladle material, geometry and temperature and the simulation results were compared with the actual experiments.

• Advances in concrete construction
• /
• 제7권4호
• /
• pp.241-247
• /
• 2019

In this paper the effect of bedding layer on the failure mechanism of rock in direct shear test has been investigated using particle flow code, PFC. For this purpose, firstly calibration of pfc2d was performed using Brazilian tensile strength. Secondly direct shear test consisting bedding layer was simulated numerically. Thickness of layers was 10 mm and rock bridge length was 10 mm, 40 mm and 60 mm. In each rock bridge length, bedding layer angles changes from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Totally 21 models were simulated and tested. The results show that two types of cracks develop within the model. Shear cracks and tensile cracks. Also failure pattern is affected by bridge length while shear strength is controlled by failure pattern. It's to be noted that bedding layer has not any effect on the failure pattern because the layer interface strength is too high.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.69-81
• /
• 2021

The aim of this paper is to identify the key determinants in the Gulf Cooperation Council (GCC) countries for Foreign Direct Investment (FDI) inflows by using a balanced data panel for the period from 1995 to 2018. This study covers GCC countries in their entirety. The study uses ten explanatory variables, namely, trade ratio, gross domestic product, external balance, fuel exports, gross savings, international tourism, military expenditure, net foreign assets, services value added, and total natural resources. The authors have tried to find the best fit model from the differences methods considered such as OLS, GLS regression with the help of Hausman test, and country by country regressions as additional analysis. The study revealed a significantly positive association between inflation, trade ratio, gross domestic product, gross savings, and net foreign assets with FDI. On the contrary, international tourism was revealed to have a negative association with FDI. The sample of all GCC countries chosen for this study has not been considered widely by any earlier study. Moreover, this study covered many determinants of FDI that add to the previous literature. It is a significant contribution to the current research body and stresses the originality of this paper.

• 대한두개안면성형외과학회지
• /
• 제22권1호
• /
• pp.52-55
• /
• 2021

Complete surgical excision within a margin of normal healthy bone is the treatment of choice for intraosseous hemangioma. A 56-year-old man visited with complaints of a firm, mildly tender, immovable, and palpable mass on the right forehead (size: 1.5×1.5 cm). Non-contrast brain computed tomography performed preoperatively revealed a 1.5 cm heterogenous osteolytic lesion with suspected internal trabeculation in the right frontal bone. Under general anesthesia, a 2 cm transverse incision was made on the forehead skin rather than bicoronal incision. Full-thickness en bloc resection of the frontal bone including the mass was performed. The frontal bone was removed with care taken not to damage the frontal sinus mucosa. The frontal sinus was sealed with a collagen patch (Tachocomb) and a cranioplasty was performed using bone cement. At 6 months postoperative, a clean wound was confirmed without any complications, and there was no local recurrence. Surgical excision of intraosseous hemangioma in the frontal sinus bone can be performed via direct incision or the bicoronal approach. In this case, the direct incision approach was used to achieve smaller scars and faster recovery than the bicoronal approach.

• 센서학회지
• /
• 제30권2호
• /
• pp.105-108
• /
• 2021

Detection and localization of partial discharge are considered critical techniques for estimating the lifetimes of power cables. High-frequency current transformers (HFCTs) are commonly used for the detection of partial discharge in high-voltage alternating current (HVAC) power cables; however, their applicability is compromised by the limitations of the installation locations. HFCTs are typically installed in cable terminals or insulation joint boxes because HVACs induce strong time-varying magnetic fields around the cables, saturating the ferromagnetic materials in the HFCTs. Therefore, partial discharges near the installation locations can be detected. In this study, the feasibility of partial discharge detection using a HFCT was investigated for high-voltage direct current (HVDC) cables. We demonstrated that the HFCT could be installed at any location in the HVDC power cable to monitor partial discharge along the entire cable length. Furthermore, we showed that the HFCT could detect the location of partial discharge with high accuracy.