• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2160-2179
• /
• 2015

In many Radio Frequency Identification (RFID) applications, the reader recognizes the tags within its scope repeatedly. For these applications, some algorithms such as the adaptive query splitting algorithm (AQS) and the novel semi-blocking AQS (SBA) were proposed. In these algorithms, a staying tag retransmits its ID to the reader to be identified, even though the ID of the tag is stored in the reader's memory. When the length of tag ID is long, the reader consumes a long time to identify the staying tags. To overcome this deficiency, we propose a slot allocated blocking anti-collision algorithm (SABA). In SABA, the reader assigns a unique slot to each tag in its range by using a slot allocation mechanism. Based on the allocated slot, each staying tag only replies a short data to the reader in the identification process. As a result, the amount of data transmitted by the staying tags is reduced greatly and the identification rate of the reader is improved effectively. The identification rate and the data amount transmitted by tags of SABA are analyzed theoretically and verified by various simulations. The simulation and analysis results show that the performance of SABA is superior to the existing algorithms significantly.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.12-20
• /
• 2008

RFID(Radio frequency indentification) technology, that the reader detect the tag information attached on the objects without contact, is considered the kernel of realizing tile Ubiquitous Sensor Network. Particularly, because there are lots of tags(which the reader have to detect) in the UHF RFID system(that is applied at the Logistic & Distribution industry). In the UHF RFID system the negative effects, we called the tag-collision, may occur and we should solve these effects. So, in the EPCglobal Gen2 protocol they present the Slotted Random Anti-collision algorithm to prevent the tag-collision effect. In this paper, in order to minimize the tag-collision effect and bring on the system efficiency, we propose the Power Increasing Method that controls the transmission power of the reader depending on the environment and verily the improved performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3997-4015
• /
• 2014

Radio frequency identification (RFID) is an emerging wireless communication technology which allows objects to be identified automatically. The tag anti-collision is a significant issue for fast identifying tags due to the shared wireless channel between tags and the reader during communication. The EPCglobal Class-1 Generation-2 which uses Q algorithm for the anti-collision is widely used in many applications such as consumer electronic device and supply chain. However, the increasing application of EPCglobal Class-1 Generation-2 which requires the dynamic environment makes the efficiency decrease critically. Furthermore, its frame length (size) determination and frame termination lead to the suboptimal efficiency. A new anti-collision algorithm is proposed to deal with the two problems for large-scale RFID systems. The algorithm has higher performance than the Q algorithm in the dynamic environment. Some simulations are given to illustrate the performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.33-41
• /
• 2008

As RFID technology is developing and increasingly being used in many applications, the implementation is changing from single reader to multiple readers even dense readers. Since the number of readers is increasing, there are more collisions between readers and much interference between readers and tags. Therefore, to avoid interference or collision, many algorithms have being proposed, such as Gen2 dense mode, LBT(listen before talk), TDMA based method. In this paper, we propose a null frame algorithm, which calculates the collision probability in frame slotted aloha scheme and use this information to avoid the possible collisions. Comparing with conventional scheme, our proposed algorithm has some advantages in terms of reader collision number and required frame numbers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.814-821
• /
• 2005

When there are many tags using the same frequency around the reader in RFID system, they disturb each other and in the end their response cannot be received by the reader. To solve this disturbance and fast identify the tags, the anti-collision algorithm, which is the core technology in RFID system, is needed. We propose two ALOHA-type Dynamic Framed Slotted ALOHA(DFS-ALOHA) algorithms using Dynamic Slot Allocation(DSA), which dynamically allocates the frame size in accordance with the number of tags and Tag Estimation Method(TEM), which estimates the number of tags around the reader. We also compare the performance of the proposed DFS-ALOHA algorithms with that of the conventional Framed Slotted ALOHA (FS-ALOHA) algorithms and the algorithms proposed by Vogt using OPNET simulation. According to the analysis, the two proposed DFS-ALOHA algorithms(DFS-ALOHA I and DFS-ALOHA II) show better performance than the conventional ALOHA-based algorithms regardless of the number of tags. Although the two proposed DFS-ALOHA algorithms show the similar performance, BFS-ALOHA ll is better because it is easier to be implemented in the system and the complexity is lower.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.281-285
• /
• 2011

One of the key issues in implementing RFID systems is to design anti-collision protocols for identifying all the tags in the interrogation zone of a RFID reader with the minimum identification delay. In this paper, Furthermore, in designing such protocols, the limited resources in tags and readers in terms of memory and computing capability should be fully taken into consideration. we first investigate two typical RFID anti-collision algorithms, namely RFID Gen2 Q algorithm (accepted as the worldwide standard in industrial domain) and FAFQ algorithm including their drawbacks and propose a new RFID anti-collision algorithm, which can improve the performance of RFID systems in terms of tag identification time considerably. Further, we compared performance of the proposed algorithm with Q algorithm and FAFQ algorithm through computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.807-812
• /
• 2015

In RFID system, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred as anti-collision algorithm. In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. In this paper, we propose a STAC/PS algorithm that the PS algorithm is applied in the STAC protocol. Through simulations, it is demonstrated that the collision rate for the proposed algorithm is about 50% lower than STAC protocol. Therefore, the STAC/PS algorithm can achieve faster tag identification speed compared with STAC protocol due to the low collision rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.431-439
• /
• 2006

RFID Anti-Collision technique is needed to avoid collision problem caused by Radio interference between tags in the same RFID Reader area. It affects the performance and reliability of the RFID System. This paper propose the QT-CBP(Query Tree with Collision-Bit Positioning) Algorithm based on the QT(Query Tree) algorithm. QT-CBP Algorithm use precise collision bit position to improve the performance. We demonstrated the proposed algorithm by simulation. Our algorithm outperformed when each tag bit streams are the more duplicate and the number of tags is increased, compared with QT.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.53-63
• /
• 2008

Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.287-292
• /
• 2007

In this paper, a QT_ecfi algorithm is proposed for identifying all the tags within the identification range. The proposed QT_ecfi algorithm revises the QT algorithm, which has a memoryless property. In the QT_ecfi algorithm, the tag will send the remaining bits of their identification codes when the query string matches the first bits of their identification codes. When the reader receives all the responses of the tags, it knows which bit is collided. If the collision occurs in the last bit, the reader can identify two tags simultaneously without further query. While the tags are sending their identification codes, if the reader detects a collision bit, it will send a signal to the tags to stop sending. According to the simulation results, the QT_ecfi algorithm outperforms the QT algorithm in terms of the number of queries and the number of response bits.