• 제목/요약/키워드: Anti-fire

검색결과 118건 처리시간 0.022초

일반 소방호스와 꼬임방지 소방호스의 꼬임 횟수에 따른 방수시간 분석 (Analysis of Waterproof Time by Number of Twists between Ordinary Fire Hose and Anti-twist Fire Hose)

  • 홍석환;김서영;공하성
    • 대한안전경영과학회지
    • /
    • 제23권4호
    • /
    • pp.55-60
    • /
    • 2021
  • This study is to check waterproof by number of twists of fire hose and measure the first waterproof time to analyze the relationship between twists of fire hose and first waterproof time and waterproof by position of twists so as to suggest the efficient plan to prevent twists of fire hose. Ordinary fire hose did not make waterproof in case that position of twists was near the nozzle with twists 5 times or more, while anti-twist fire hose had no problem for waterproof only with delayed time. Like ordinary fire hose, anti-twist fire hose also showed the tendency to increase the waterproof time in proportion to the number of twists. In case that the position of twists was near waterproof port even with 10 times of twists in anti-twist fire hose, the first waterproof time was increase by 0.63 seconds on average without any problem for waterproof, which was somewhat faster than that in ordinary fire hose. With respect to the position of twists, waterproof of anti-twist fire hose was affected more as the number of twists was increased more near the nozzle rather than near the waterproof port, like ordinary fire hose. In summary, anti-twist fire hose equipped with anti-twist tool at the middle connection port and the nozzle showed a good waterproof performance with delayed waterproof time regardless of number of twists, as a solution for the twist problem of ordinary fire hose.

사찰 화재예방시스템의 개선방안에 관한 연구 (A Study on the Improvement of Anti-Fire System of Temples)

  • 공하성
    • 한국방재학회 논문집
    • /
    • 제8권4호
    • /
    • pp.87-90
    • /
    • 2008
  • 이 연구는 사찰의 화재 사례, 일본의 사찰 안전관리에 대하여 고찰 분석하였다. 그 결과를 토대로 사찰 화재예방시스템에 대한 개선방안 제안을 목적으로 하고 있다. 사찰 화재예방시스템의 개선방안으로는 첫째, 화재로 문화재 소실 등의 피해를 줄일 수 있도록 "문화재보호법"에 화재예방을 위한 규정 신설의 필요성 제기 둘째, 단독경보형 감지기 및 에어졸식 간이소화용구를 설치하여 화재의 조기발견 및 진화 그리고 인명피해를 최소화 방안 강구 셋째, 경미한 전기설비 설치공사에 있어서도 "국가기술자격법"에 의한 전기분야의 기술자격을 취득한 자가 시공할 수 있도록 "전기사업법령"상의 기준 마련 등이다.

다중포인트 통신 프로토콜을 지원하는 디지털 화재 방지 모니터링 시스템 구현에 관한 연구 (A study on the implementation of digital anti-fire monitoring system with multipoint communication protocol)

  • 김기중
    • 한국전자통신학회논문지
    • /
    • 제7권6호
    • /
    • pp.1423-1428
    • /
    • 2012
  • 본 논문에서는 RS-485통신을 이용하여 1Km 이내의 근거리에 떨어져 있는 여러 단말기에 대한 입출력 정보들을 제어 할 수 있는 다중포인트 지원 화재 방지 모니터링 시스템을 구현 하였다. 다중포인트 통신 프로토콜은 화재 감시 및 방재를 위해 소방수신기와 중계기 간의 접속을 지원하며, 단말기의 입출력 정보 처리 및 제어를 할 수 있으며 최대 8128개의 다중포인트 입출력 제어가 가능하도록 프로토콜을 설계하였다. 또한 소방법에 명시한 제한된 시간내에 최대 1016개의 단말기 전체에 대한 정보를 확인할 수 있는 통신프로토콜을 구현하기 위해 중계기와 수신기 사이에 중계반과 중계반 제어장치를 설계하여 구현 확인하였다.

ABS 모듈의 접속부 및 전원배선 손상으로 인한 차량화재 사고사례 분석 (Analysis on the Fire Accident of Vehicle Due to Damage of Connector and wiring on an Anti-lock Brake System(ABS) Module)

  • 박남규;김진표;남정우;박종택;송재용
    • 한국안전학회지
    • /
    • 제32권5호
    • /
    • pp.13-19
    • /
    • 2017
  • In this paper, study of vehicle fire cases caused by connector and power wiring of anti-lock brake system(ABS) module damage is presented. The purpose of ABS module is to improve braking and steering ability under sudden stop of the vehicle by repeatedly activating and releasing the brake with electric signal via electric control unit. The electric control unit for ABS may experience incomplete contact between power line and signal line or electrical breakdown on the printed circuit board by undergoing repetitive signal change which would consequently result in electrical heat and spark, eventually leading to automotive fire. Therefore, the purpose of this paper is to provide fundamental data by analyzing connector and power wiring of ABS module damage conducive to the precise investigation on the cause of vehicle fire.

국내외 민간 방재조직의 특성에 관한 비교 분석 (Comparative study on characteristics of domestic and foreign civil anti-disaster organizations)

  • 김보균;이정혁;채종식
    • 한국응급구조학회지
    • /
    • 제25권3호
    • /
    • pp.127-143
    • /
    • 2021
  • Purpose: The purpose of the study is to investigate the actual state of activity on domestic and foreign civil anti-disaster organizations, related suggestions, and development plans. Methods: This study used the documentary survey research method and the technical approach method. Civil anti-disaster organizations' information was derived from detailed scholarly monographs, specialty publications, and previous studies of master doctorate dissertation. Results: Volunteer Fire Department and voluntary crime prevention groups show problems related to budgetary deficits and volunteer deficiency. In order to resolve these issues, laws must be enacted to guarantee interest and support. In addition, the Citizen Corps Active in Disaster (CAIND) organization requires a dedicated salary system to address the investment of its workforce and the cost of heavy equipment. Moreover, deficiencies were revealed regarding the lack of systems in support of occupational education and training. In conclusion, several weak points require close attention. Conclusion: The results of this comparative analysis study about the domestic and foreign civil anti-disaster organizations provide insight into identity materialization and concept establishment.

난연처리 목재의 방미 및 방부성능 (Decay Resistance and Anti-mold Efficacy of Wood Treated with Fire Retardants)

  • 손동원;강미란;이동흡;박상범
    • Journal of the Korean Wood Science and Technology
    • /
    • 제41권6호
    • /
    • pp.559-565
    • /
    • 2013
  • 목재사용량의 증가에 따라 목재의 화재안전성에 대한 요구가 높아지고 있다. 실내 사용 목재의 난연처리에 무기인계를 약제로 사용함으로써 환경에 대한 부담을 줄이면서 난연성능을 향상 시킬 수 있다. 수용성 약제를 가압 주입하여 목재 내 깊숙이 침투시키면 목재의 고유기능을 유지하면서 난연성능을 부여 할 수 있다. 난연제의 용탈을 억제하여 장기간 성능을 유지할 수 있는 장점도 있다. 저자들은 액상규산나트륨을 주약제로 하고, 붕산 및 인계 약제를 보조약제로 하여 목재 내로 약액을 주입하는 공정을 개발하였다. 이들 약제는 난연성능 외에 방부 및 방충성능을 지니는 약제가 포함되어 있어, 난연성능과 함께 목재 사용 시 노출될 수 있는 부후환경에서의 내후성능을 방미효력과 방부효력으로 평가하였다.

필름제조 공정의 착화 위험성에 관한 연구 (A Study on Firing Risk Assessment of Film Manufacturing Process)

  • 민세홍;허원일
    • 한국화재소방학회논문지
    • /
    • 제25권3호
    • /
    • pp.107-112
    • /
    • 2011
  • 본 연구에서는 대전방지필름 제조공장에서의 화재위험성 등을 고찰하였다. 대전방지필름 제조공정에서는 에탄올, 메탄올, 이소프로필알콜 같은 인화점이 낮은 용제가 사용되며 이들 용제의 최소점화에너지는 0.16 mJ~0.65 mJ로 낮은 방전에너지에도 쉽게 착화할 위험성이 있다. 제조공정 각 부분에서 발생하는 정전기 전위를 측정한 결과, 합지 과정의 필름에서 17kV~20kV의 전위가 측정되었다. 이는 화재 폭발 방지를 위한 부도체의 대전 목표 값인 5kV를 초과하는 것이다. 따라서 대전방지필름 제조공장에서 정전기 방전에 의한 화재위험성이 높다는 것을 알 수 있었다.

전기적 열선의 발화 및 화재 위험성에 관한 연구 (A Study on Ignition and Fire Risks of Electric Heat Wire)

  • 민세홍;송병준
    • 대한안전경영과학회지
    • /
    • 제17권4호
    • /
    • pp.113-121
    • /
    • 2015
  • This study aims to examine the risk of electrical fire in places where electric heat wires are used. In general, the use of electric heating wires is becoming more common and prevalent in a bid to prevent increasing damage caused by freezing and bursting in residential water pipes, factory pipes and irrigation pipes in vinyl greenhouse and a variety of heat wire products are available in market with legal safety requirements imposed on them. However, the widespread use of anti-freezing burst heat wire products has caused increasing incidents of fire, which often fail to be incorporated into statistics due to quick onsite extinguishing and insignificant damage although damage is gradually on the rise. Against this backdrop, this study aims to look into the possibility of ignition caused by electric heat wires and the mechanism of how it turns into catching fire through overheat and short circuit tests for anti-freezing burst electrical heat wires (hereinafter called the 'heat wire') and expects to serve as the basis for further observations and analyses on the cause of fire and the process of ignition in a scientific manner.