• 제목/요약/키워드: Anti-Rolling

검색결과 89건 처리시간 0.024초

선미측에 플랩을 갖는 선박의 동특성 규명과 횡동요 제어계 설계 (An Experimental Study on the System Identification and Anti-Rolling System Design for a Ship with Flaps)

  • 김영복;강귀봉;채규훈
    • 한국해양공학회지
    • /
    • 제18권2호
    • /
    • pp.39-45
    • /
    • 2004
  • We have investigated the usefulness of an active stabilizing system to reduce ship rolling under disturbances, using varying reaction of the flaps. In the proposed anti-rolling system for a ship, the flaps, as the actuator, are installed on the stern, in order to reject the rolling motion induced by disturbances, such as waves. The action induced by the flaps, which is dependent upon the power of the disturbances, can keep the ship in balance. In this study, we define the system parameters under the given system structure, using spectral analysis and experimental studies. Based on this information, we design the controller to evaluate the usefulness of the proposed system.

제어 입력포화를 고려한 횡동요 저감장치용 제어알고리듬 설계 (Design of Control Algorithm for Mass Driving Anti-Rolling System Considering Control Input Constraint)

  • 문석준;임채욱;이해종
    • 대한조선학회논문집
    • /
    • 제42권6호
    • /
    • pp.566-574
    • /
    • 2005
  • Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MO-ARS) might be one candidate of several systems against the ship's rolling. As the movable range of the mass on the ship is finite, the control system must include restriction on the mass position to protect the device and the ship. This restriction usually causes windup phenomenon and control performance is deteriorated seriously. Two control algorithms, anti-windup control and saturated sliding mode control, are studied in this paper. Control performance and robustness problem are checked out by numerical simulations.

250 TEU급 모바일하버를 위한 횡동요 저감 장치의 개념 설계 연구 (A Study on Conceptual Design of Anti-rolling Devices for 250 TEU Class Mobile Harbors)

  • 정태영;문석준;류재문;박철훈;조한욱;김병인;윤현규;강주년
    • 한국소음진동공학회논문집
    • /
    • 제20권7호
    • /
    • pp.629-636
    • /
    • 2010
  • A Mobile Harbor is a new transportation platform which can load and unload has containers to and from very large container ships on the sea. Currently designed Mobile Harbor a catamaran type which is equipped with precisely controlled gantry crane on the deck, and can transport 250 TEUs at a time. Loading and unloading works by crane require very small motion of Mobile Harbor in waves, because it may be operated outside of harbors. In this project, applicability of both tuned-type anti-rolling tank and maglev-type active mass driver is studied as anti-rolling systems.

소형 선박용 진자식 횡동요 저감장치의 실선시험 (A Sea-Trial Test of a Pendulum-type Mass Driving Anti-Rolling System for Small Ships)

  • 문석준;박찬일;정종안;김병인;윤현규
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 춘계학술대회논문집
    • /
    • pp.438-441
    • /
    • 2004
  • Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, a sea-trial test on a pendulum-type MD-ARS passively operated is carried out in Suyoung, Busan. After the system is installed on the cabin of the small leisure boat, a series of test is conducted before and after operating the system. Through the test, it is confirmed that the roll rate of the ship is pretty well reduced by the system.

  • PDF

윤활성 및 압연기 청정성을 겸비한 냉간 압연유의 개발 (Development of a Cold Rolling Oil with Lubricity and Mill Cleanness Property)

  • 한석영;송교봉;이준정
    • Tribology and Lubricants
    • /
    • 제13권2호
    • /
    • pp.74-81
    • /
    • 1997
  • The purpose of this study is to develop a cold rolling oil with lubricity and mill cleanness property under the rolling conditions of high reduction ratio and high rolling speed. Six kinds of oil samples were blended. Evaluation of lubricity and anti-seizuro property of the samples were carried out with a laboratory scale rolling mill, where the contact conditions between work roll and strip are very close to actual cold rolling mill. Laboratory evaluation for dispersion, contamination, anti-oil stain property and residual carbon, etc. were carried out with several testers such as longterm circulation tester, Coulter counter and Conradson tester. A new high speed cold rolling oil with good lubricity and mill cleanness property was developed compared with the previously developed rolling oil.

Coupled Motion Simulation of the Mobile Harbor and Anti-Rolling Devices in Waves

  • Yoon, Hyeon-Kyu;Kang, Joo-Nyun;Lew, Jae-Moon;Moon, Seok-Joon;Chung, Tae-Young
    • 한국항해항만학회지
    • /
    • 제34권4호
    • /
    • pp.271-279
    • /
    • 2010
  • The Mobile Harbor(MH) is a new transportation platform that can load and unload containers to and from very large container ships in the sea. This loading and unloading by crane can be performed with only very small movements of the MH in waves because MH is operated outside of the harbor. For this reason, an anti-rolling tank(ART) and an active mass driving system(AMD) were designed to reduce MH's roll motion, especially at the natural frequency of MH. In the conceptual design stage, it is difficult to confirm the design result of theses anti-rolling devices without modeling and simulation tools. Therefore, the coupled MH and anti-rolling devices' dynamic equations in waves were derived and a simulation program that can analyze the roll reduction performance in various conditions, such as sea state, wave direction, and so on, was developed. The coupled equations are constructed as an eight degrees of freedom (DOF) motion that consists of MH's six DOF dynamics and the ART's and AMD's control variables. In order to conveniently include the ART's and AMD's control dynamics in the time domain, MH's radiated wave force was described by an impulse response function derived by the damping coefficient obtained in the frequency domain, and wave exciting forces such as Froude-Krylov force and diffraction force and nonlinear buoyancy were calculated at every simulation time interval. Finally, the roll reduction performances of the designed anti-rolling devices were successfully assessed in the various loading and wave conditions by using a developed simulation program.

무인반잠수정의 진자식 횡동요 저감 장치 설계 및 감쇠계수 기반 검증 (Design of a Pendulum-type Anti-rolling System for USSV and Verification Based on Roll Damping Coefficient)

  • 진우석;김용호;정준호;이광국;김동헌
    • 대한조선학회논문집
    • /
    • 제56권6호
    • /
    • pp.550-558
    • /
    • 2019
  • The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.

안티롤링 진자를 장치한 선박의 점성감쇠계 해석에 대한 연구 (A Study on Viscous Damping System of a Ship with Anti-Rolling Pendulum)

  • 박석주;장광호;이금주
    • 한국항해항만학회지
    • /
    • 제41권6호
    • /
    • pp.365-372
    • /
    • 2017
  • 부유체의 횡동요는 승조원의 피로를 누적시키고, 심지어 구조물 전체를 전복시키기까지 하고, 또 선체에 반복적인 외력을 가하는 등 부유체의 안정성과 구조물의 안전에 심대한 영향을 끼친다. 그래서 거의 모든 선박의 경우에는 빌지킬을 설치하여 횡동요를 감소시키고 있고, 특수한 경우에는 안티롤링 탱크나 핀 스태빌라이저나 자이로스코프 등을 설치하여 횡동요를 줄이고 있다. 그러나 안티롤링 탱크는 설치하는데 용적을 많이 차지하고, 핀 스태빌라이저나 자이로스코프는 설치비와 유지 관리비가 많이 든다. 저자들은 안티롤링진자를 이용한 부유체의 롤링저감에 대한 연구를 하여 실험과 Runge-Kutta 해석에 의하여 그 유효성을 보인 바 있다. 여기에서는 선박에 안티 롤링 진자를 설치한 모델을 2자유도 점성감쇠계로 선형화하여 시스템을 해석하고 실험과 비교하여 수학 모델의 정당성을 보이고, 수학 모델의 정당성을 바탕으로 최적의 안티 롤링 진자를 제안한다. 7.7kg의 모형선의 경우 모형선 질량의 0.26%인 20g의 안티롤링 진자가 가장 효율이 좋음을 보였다. 또 안티 롤링 진자의 질량이 다른 몇 가지 경우에 대하여서 자유 롤링 실험을 하여 안티 롤링 진자의 유효성을 보인다.

발수 성분을 포함하는 프로필렌글리콜(PG) 기반 고속철도차량용 제·방빙액의 특성 (Properties of De/Anti-icing Fluid for High Speed Railway Rolling Stock Based on Propylene-glycol Containing Water Repellent Agent)

  • 박진명;김태현;양정무;윤차중;이홍기
    • 공업화학
    • /
    • 제34권1호
    • /
    • pp.69-74
    • /
    • 2023
  • 화학적 제빙 방법으로 프로필렌글리콜 제빙액은 동절기 고속철도차량 하부 및 대차부에 부착되는 설빙으로 인한 결빙을 녹이는데 적용가능하다. 프로필렌글리콜 제빙액을 운행 전 고속철도차량에 철도차량 하부 및 대차부에 미리 살포하여 눈의 부착을 최소화하면 해빙 효율을 더 높일 수 있다. 고속철도의 경우 프로필렌글리콜 제빙액을 살포하여도 고속으로 운행 시 대차 표면에서 제빙액은 거의 소실되기 때문에 눈의 부착으로 인한 결빙에 대한 방빙성능은 떨어진다. 본 연구에서는 동절기 고속철도차량 하부 및 대차부에 부착되는 설빙으로 인한 결빙을 방지하기 위해 표면의 결빙을 방지하는 발수 성분을 포함하는 프로필렌글리콜 제·방빙액의 특성을 연구하였다. 발수제의 종류에 따른 점도, 융빙성능, 접촉각 및 방빙성능에 대한 비교 평가를 실시하여 고속철도차량 제·방빙액으로 최적의 물질을 찾고자 하였다. 평가 결과 에톡시실란 타입의 발수제 성분을 포함하는 제·방빙액이 가장 적합한 것으로 확인하였다.

선박의 횡동요 저감장치를 위한 제어로직 설계 (Control Logic Design for Mass Driving Anti-Rolling System of Ships)

  • 문석준
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.725-731
    • /
    • 2003
  • Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-.oiling system (MD-ARS) might be one candidate of several systems against the ship's rolling. As the movable range of the mass on the ship is finite, the control system must include restriction on the mass position to protect the device and the ship. This restriction usually causes windup phenomenon and control performance is deteriorated seriously. We adopt anti-windup technique to improve the control performance and demonstrate its efficiency by simulation.

  • PDF