• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.7-10
• /
• 2003

ABS interface IC for automobiles was designed and their electrical properties were investigated. The voltage regulator was designed to operate in the temperature range from $-20^{\circ}\;to\;120^{\circ}C$ for automobile environment. ABS and brake signal were separated using the duty factor of same frequency or different frequencies. UVLO circuit and constant current circuit were applied for the elimination of noise.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.211-217
• /
• 2007

The wheel slip control systems are able to control the braking force more accurately and can be adapted to different vehicles more easily than conventional ABS (Anti-lock Brake System) systems. In realizing the wheel slip control systems, real-time information such as the tire braking force at each wheel is required. In addition, the optimal target slip values need to be determined depending on the braking objectives such as minimum braking distance and stability enhancement. In this paper, a robust wheel slip controller is developed based on the adaptive sliding mode control method and an optimal target slip assignment algorithm is proposed for maximizing the braking force. An adaptive law is formulated to estimate the braking force in real-time. The wheel slip controller is designed based on the Lyapunov stability theory considering the error bounds in estimating the braking force and the brake disk-pad friction coefficient. The target slip assignment algorithm searches for the optimal target slip value based on the estimated braking force. The performance of the proposed wheel slip control system is verified in HILS (Hardware-In-the-Loop Simulator) experiments and demonstrates the effectiveness of the wheel slip control in various road conditions.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.67-74
• /
• 2019

The automotive market has recently been investing much time and costs in improving existing technologies such as ABS (Anti-lock Braking System) and TCS (Traction Control System) and developing new technologies. Additionally, various methods have been applied and developed to reduce this. Among them, the development method using the simulation has been mainly used and developed. In this paper, we have studied a method to develop SILS (Software In the Loop Simulation) for TCS which can test various environment variables under the same conditions. We modeled hardware (vehicle engine and ABS module) and software (control logic) of TCS using MATLAB/Simulink and Carsim. Simulation was performed on the climate, road surface, driving course, etc. to verify the TCS logic. By using SILS to develop TCS control logic and controller, it is possible to verify before production and reduce the development period, manpower and investment costs.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.127-133
• /
• 2001

In this study, the effect of the factors of a hydraulic modulator of ASMS was analysed. The modeling of ASMS was presented and the equation of ASMS was derived from the modeling. With this background, GUI analysis tool was developed. After the verification of the reasonability of simulation, the response of a hydraulic modulator is investigated through simulation of modeling. With this simulation, each behavior was predicted with changing the various parameters and determined the influenced factors to apply the designing process.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.84-93
• /
• 2004

This study carries out the performance improvement and simplification of hydraulic modulator that plays an important role in vehicle stability control systems. The mathematical models for each component of a modulator, such as pump, wheel cylinder, check and solenoid valve, accumulator, damper are derived in detail. All the mathematical models are combined to form a modulator system and implemented through a computer program, which can be controlled by a user friendly GUI. To verity the simulation, comparison between simulation and experiments has been made. After the verification of the validity of the simulation, the effects of the design parameters of the modulator on the wheel cylinder pressure is investigated. The results show that the modulator without MPA has advantage in early time pressure rise rate, and it can be simplified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1-13
• /
• 2002

최근 자동차가 편리성과 안전성을 추구함에 따라서 자동차 부품도 과거의 기계식 동작 방법에서 전자 제어 장치가 부착된 전자식 동작 방법으로 발전되어 가고 있는 추세입니다. 또한 연비 향상을 위하여 부품의 소형화가 급속히 추진되고 있습니다. 이러한 전자화, 소형화를 실현시키기 위해 자동차 부품에서의 정밀성이 요구되어 지고 있고, 부품 제조 측면에서는 고속화, 정확성이 요구되고 있는 실정입니다. 당사의 경우 CBS (Conventional Brake System)를 생산하다가 전자 제어 장치가 부착된 ABS (Anti-lock Brake System)의 생산을 시작할 때, 부품의 정밀도를 좌우하는 각 치수의 공차 영역이 전체적으로 CBS 대비 약 1/5 수준밖에 되지 않고, 가공 속도는 약 2 배가 빨라야 하기 때문에 생산 준비 단계에서 많은 시행 착오를 겪어야만 했습니다. 여기서 당사가 ABS를 양산하면서 겪은 경험을 토대로 기술토록 하겠습니다. 가공 기술의 경우 고속, 정밀 가공을 실현시키기 위해서 크게 4 가지 측면을 고려해야만 하며, 그 4가지는 설비, Tool Holder, Tool, Chip 측면입니다. 먼저 설비가 고정도가 되기 위해 고강성을 필요로 하는 것은 물론 가동중에 필연적으로 발생하는 열변형에 대한 대책을 수립하지 않으면 안됩니다. 이러한 열변형은 설비 설계 단계에서 대책을 수립할 수 있는 것도 있지만 주위 온도 변화에 의한 열변형처럼 사용 중에 발생되는 것은 설비 사용자가 장시간에 걸친 Data 를 확보하여 대책을 수립하지 않으면 안됩니다. 또한 Tool Holder의 정도도 일반적으로 사용하는 것보다는 고정도의 것이 요구되어지므로 Tool Holder Maker 에 반드시 요구 정도를 명기하여 주문하여야 합니다. Tool도 고속화를 실현시키기 위해 고정도의 다이아몬드 공구가 필요하였고 이를 국내에서 개발하기 위해 많은 시행 착오를 겪어야만 했습니다. 또한 Chip 배출이 고정도의 필수 고려 항목으로서 당사에서는 경우에 따라 여러 가지의 방법을 사용하고 있습니다. 조립 기술의 경우 스테인레스 박판을 열변형을 최소로 하면서 용접을 하기 위해서 레이저 용접을 도입하였고, 부품을 압입하면서 정확하고 정밀한 치수 셋팅을 위하여 서버 모타를 이용한 압입 방법을 사용하였습니다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.342-344
• /
• 2008

24V DC power system of commercial vehicle includes 28V alternator and 24V battery bank (two 12V battery bank in series). BEQ(Battery Equalizer) provides efficient and reliable 12V DC power to 12V electrical load in 24V DC power system. In addition to providing 12V DC power, BEQ ensures that battery voltages remain equal which extends battery life. It is the most cost effective and efficient solution for dual voltage systems. BEQ made by Hyundai MOBIS is specifically designed to provide reliable 12V DC power for 12V ABS(Anti-lock Brake system).

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1125-1134
• /
• 2004

This paper presents a mathematical model which is about the dynamics of not only a two wheel steering vehicle but a four wheel steering vehicle. A sliding mode ABS control strategy and PID rear wheel control logic are developed to improve the brake and cornering performances, and enhance the stability during emergency maneuvers. The performances of the controllers are evaluated under the various driving road conditions and driving situations. The numerical study shows that the proposed full car model is sufficient to accurately predict the vehicle response. The proposed ABS controller reduces the stopping distance and increases the vehicle stability. The results also prove that the ABS controller can be employed to a four wheel steering vehicle and improves its performance. The four wheel steering vehicle with PID rear wheel controller shows increase of stability when a vehicle speed is high and sharp cornering maneuver when a vehicle speed is low compared to that of a two wheel steer vehicle.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.147-155
• /
• 2002

Mechatronic subsystems are more and more developed in automotive industries. To enhance the local controls performances, a cooperative control between ABS and Suspension systems is proposed. The respective controls are first designed separately with their dedicated models. Then a hybrid hierarchical architecture is developed. The advantage of this architecture is discussed through vehicle performance with simulation results.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.29-39
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out In investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density! time and temperature, and concluded as follows； 1. Sintering under the circumstances of hydrogen gas and tile temperature of $1250^{\circ}C$ for 60min. showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of 6.89g/$cm^3$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply increased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of 6.89g/$cm^3$.