• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.209-212
• /
• 2004

This paper has been studied the impact of the distance between the signal source and the antenna under test on the antenna measurements such as gain and pattern (Phase). The concept and principles of the far-field in the antenna measurement are reviewed at first. The analysis on the impact has been focused on the 11 m parabola antenna system which will be used in the ground telemetry station for tracking and receiving the S-band ($2200\~2400MHz$) signal of KSLV-I. Also, the impact of the distance on the tracking performance of the antenna system has been analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.591-597
• /
• 2022

In this paper, we analyzed linkbudget with comparing actual received level of telemetry system at Palau Tracking Station. Because Palau Tracking Station participated in the launch mission for the first time and lack of verification tests for antenna tracking and signal reception performance, we analyzed the linkbudget more accurately by predicting transmit antenna polarization gain according to the trajectory and attitude of launch vehicle. The analysis results were used to analyze signal reception range, antenna operation angle and LHCP/RHCP received level. The actual received level of the antenna was similar to the linkbudget result as a result of the launch mission operation.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.448-451
• /
• 2004

MSC (Multi-Spectral Camera) system is an electro-optical camera system which is being developed to be installed on KOMPSAT-2 satellite. High resolution image data from MSC system will be transmitted to the ground-station through x-band antenna called APS (Antenna Pointing System). APS is a directional antenna which will point to the receiving antenna at ground station while the satellite is passing over it. The APS needs to be controlled accurately to provide the reliable communication with big RF link margin. The APS is controlled by ATS (Antenna Tracking Software) which is included in the MSC software. ATS uses the closed loop control algorithm which will use TPF (Tracking Parameter File) as an input for antenna position, and will use two resolve readings from APS as a feedback. ATS has been developed and verified using APS QM (Qualification Model) and all the control parameters for ATS have been tested and verified. Various kinds of maximum, nominal and realistic dynamics for the APS movement have been simulated and verified. In this paper, closed loop servo control algorithm and obtained APS position error from the verification test with APS QM will be presented in detail

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.541-547
• /
• 1992

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three-dimensional adaptive tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track update illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver detector. A detailed simulation is conducted to test the validity of our tracking algorithm for encounter geometries under various conditions of maneuver.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.165-165
• /
• 2018

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.60-65
• /
• 2020

The monopulse tracking algorithm can estimate the location of a partner station based on an RF (Radio Frequency) signal. The location of the partner station is estimated based on the monopulse ratio curve (MR-C), which is calculated based on the sum and difference signal patterns of an antenna. Therefore, the range in which the estimated location can be calculated with high accuracy increases in proportion to the linear region of MR-C. In this paper, we proposed a method to extend the linear region of the MR-C curve using the beamforming technique for the tracking antenna system using the active phased array antenna. Simulation results based on the same antenna system, it was confirmed that the linear region of MR-C was enlarged by about twice as much as the general case where the proposed method was not applied.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.75-82
• /
• 2019

A Satellite Communication (SATCOM), which is applied to various systems to communicate with other systems at the limited wired communication situation, is required to head at a stable point of the space, because this system uses a geostationary satellite. It is important to know satellite tracking heading angles such as elevation angle and azimuth angle for the immovable antenna's latitude, longitude, and altitude. Moreover, calculation of heading angle is critical for SATCOM antenna on a moving platform. In this study, a antenna heading angle calculation method is applied to compute elevation and azimuth angle for a SATCOM antenna and the heading angle simulation is executed for the Korea peninsula and surrounding areas. To verify this simulation, satellite tracking test is conducted using a SATCOM antenna which uses monopulse signal tracking method. The simulation is confirmed by comparing this test result with the simulation. And we make a suggestion for calculation of polarization angle of this antenna.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.19-30
• /
• 1997

In this paper we design the optimal satellite-tracking antenna $H{\infty}$ control system using genetic algorithms. To do this, we give gain and dynamics parameters to the weighting functions and apply genetic algorithms with reference model to the optimal determination of weighting functions and design parameter ${\gamma}$ that are given by Glover-Doyle algorithm which can design $H{\infty}$ controller in the state space. These weighting functions and design parameter ${\gamma}$ are optimized simultaneously in the search domain guaranteeing the robust stability of closed-loop system. The effectiveness of this satellite-tracking antenna $H{\infty}$ control system is verified by computer simulation.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.417-425
• /
• 1998

Monte Carlo analysis is performed for the first acquisition and tracking of the KOMP-SAT spacecrat in GSOC tracking station after separation from Taurus launch vehicle. The error bounds in position and velocity vector in Earth-fixed coordinate system at injection point are assumed based on the previous launch mission. Ten thousands injection orbital elements with normal distribution are generated and propagated for Monte Carlo analysis. The tracking antenna pointing errors at spacecraft rising time and closest approach time at German Space Operations Center(GSOC) Weiheim track-ing station are derived. Then the tracking antenna scanning angles are analyzed for acquisition and tracking of the KOMPSAT signal.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.485-491
• /
• 2014

An Antenna & RF system for a fly-away satcom terminal application on ka-band is presented in this paper. The Fly-away satellite terminal can be moved and operated by two person and adapt automatic satellite tracking system in order to decrease the tracking time. Additionally, for low-power consumption, compact size and light-weight, a dual reflector antenna is constructed using dual-offset gregorian antenna structure. For minimize weight, the reflector of the antenna is made of Magnesium. For low-power consumption and light-weight, the pHEMT MMIC compound devices is utilized. The Electronic Band-Gap(EBG) Low-Pass Filter(LPF) is designed for harmonic rejection. In the receiving part, Low-Noise Block converter(LNB) structure is designed for compact and lightweight. In this paper, fly-away satcom terminal with low-power consumption, compact size and light-weight is described with antenna system and RF system performances. Through the experimentation, fly-away terminal's EIRP is more than 50dBW, G/T is more than $17dB/^{\circ}K$.