• 제목/요약/키워드: Antenna Test Coupler

검색결과 6건 처리시간 0.021초

소형 발사체 무선 통신시스템 검증을 위한 테스트 베드 설계 (Test-bed Design for the Evaluation of Wireless Communication System on Small Launch Vehicle)

  • 이대현;오택근;박동화;이홍기;박동현;송호진
    • 한국항행학회논문지
    • /
    • 제22권4호
    • /
    • pp.311-318
    • /
    • 2018
  • 본 논문에서는 소형발사체의 무선통신 시스템 검증을 위한 테스트 베드를 제안한다. 제안하는 테스트 베드는 안테나 테스트 커플러와 RF 감쇄기 및 스위칭 시스템으로 구성되어 있다. 안테나 테스트 커플러는 소형 발사체에 장착되어 있는 각 대역별 안테나를 서로 격리 시키며 무선신호를 송/수신하기 위한 장치이며 RF 감쇄기 및 스위칭 시스템은 각 대역의 안테나별 통신점검을 위하여 안테나별 경로를 선택해 주는 장치이다. 안테나 테스트 커플러 설계 결과, UHF-, S-, X-대역에서 39.3, 47.1, 56.1 dB 이상의 차폐율을 확인 할 수 있었다. 실제 소형 발사체에 적용하여 발사체 통신 시스템을 점검한 결과, 정상적으로 데이터 송/수신을 확인 할 수 있었으며, 안테나 경로 스위칭을 통하여 각 대역의 안테나별 통신 점검을 수행할 수 있었다.

RFID 시스템 이용한 열차 위치검지용 빔폭 가변형 RFID 리더안테나 (Design of Beam-forming Reader Antenna for Train Position Detection using RFID)

  • 안치형;조봉관;류상환;오순수
    • 한국철도학회논문집
    • /
    • 제18권2호
    • /
    • pp.105-110
    • /
    • 2015
  • 본 논문은 RFID기술기반의 새로운 저비용 고정밀 열차위치검지기술을 위하여 빔폭 가변형 $4{\times}1$ 리더안테나 시스템의 설계를 제안하였다. 또한, 열차 구간별 속도 변화에 따라 제안된 리더안테나의 요구되는 빔폭 계산을 수행하였다. 열차속도에 의한 제안된 안테나 시스템은 사각패치형태의 방사소자들을 스위칭 커플러를 이용하여 임피던스 변환없이 두개의 모드로 동작하도록 설계되었다. 스위칭 커플러는 사각 quadrature coupler의 중심선에 Pin Diode를 그라운드와 연결하여 다이오드의 ON/OFF 설정으로 빔폭 가변을 스위칭 하도록 하였다. 설계된 안테나는 다이오드 OFF에 $18^{\circ}$와 다이오드 ON에 $39^{\circ}$의 빔폭을 확인 하였다. 본 논문에서 설계된 리더안테나 시스템은 향후 실제 차량 시험을 통하여 철도환경에서 보다 정밀한 열차위치검지기술 확보를 위하여 유용하게 사용될 예정이다.

A New Directional Coupler Design with High Directivity for PCS and IMT-2000

  • Ji, Il-Gu;Chong, Jong-Wha
    • ETRI Journal
    • /
    • 제27권6호
    • /
    • pp.697-707
    • /
    • 2005
  • This paper proposes a new design of directional couplers with high directivity for personal communication services (PCS) and International Mobile Telecommunications-2000 (IMT-2000). The directional coupler is used to check and verify the power, frequency, and antenna reflection of a signal at transmission stations for mobile communications. The performance requirements of directional couplers are a strong coupling to reduce the effect on the transmitted power and high directivity to suppress the interference of the reflected signals and reduce the errors in communication. So far, various architectures have been proposed to gain high directivity, and there have been many studies used to obtain a strong coupling. However, conventional architectures for high directivity and strong coupling have a directivity of only about 20 dB, and there have been difficulties to achieve the higher directivity of 30 dB suitable for PCS and IMT-2000. This paper proposes a new architecture of directional couplers based on a grounding composed of strip lines, and compares the test results of this directional coupler with conventional ones. The results show that the proposed directional coupler has a directivity of more than 30 dB and is adequate for PCS and IMT-2000.

  • PDF

Ku 대역 다중모드 모노펄스 위성추적시스템을 위한 커플러 구현 및 안테나 추적정확도 분석 (Coupler Implementation and Antenna Tracking Accuracy Analysis for Ku-band Multi-mode Monopulse Satellite Tracking System)

  • 이재문;임재성;박도현
    • 한국군사과학기술학회지
    • /
    • 제19권3호
    • /
    • pp.363-370
    • /
    • 2016
  • This paper proposes a Ku-band multi-mode coupler and its monopulse tracking system, which can be applied to a unmaned aircraft vehicle(UAV) platform. In general, the carrier-to-noise(C/N) level of the beacon signal from a Ku-band commercial satellite is relatively weak compared to that of a military satellite because the Ku-band satellite has been designed for commercial services. Therefore, this paper proposes a coupler and its multi-mode monopulse tracking system satisfying the tracking accuracy under a low C/N environment and analyzes the tracking accuracy. After that, we perform a real satellite tracking test and compare the accuracy of the test with the analysis result before validating the performance of the architecture of the proposed satellite tracking system.

발사체의 RF 호환성 시험을 위한 소형 S-밴드 안테나 햇 (Compact S-Band Antenna Hat for RF Compatibility Testing of Launch Vehicle)

  • 김성완;박동철
    • 한국전자파학회논문지
    • /
    • 제26권2호
    • /
    • pp.148-157
    • /
    • 2015
  • 본 논문에서는 발사체와 지상국과의 RF 호환성 시험을 효율적으로 수행하기 위한 소형 안테나 햇을 제안한다. 제안된 구조에서는 통상적으로 쓰는 흡수체가 아닌 도체로 쉴드된 구조를 사용하여 안테나 햇의 소형화와 저손실을 구현하였다. 제작된 S-밴드 안테나 햇의 크기는 $88mm{\times}35mm{\times}44mm$로 역-F 탑재안테나의 크기($74mm{\times}13mm{\times}16mm$)에 비해 많이 크지 않으면서 중심주파수 2.25 GHz에서 25.6 dB의 반사손실, 0.26 dB의 삽입 손실, 49.4 dB의 누설손실을 갖는다. 시뮬레이션 결과와 측정 결과가 상당한 유사성을 보여준다.

동일대역 전이중 통신을 위한 RF/아날로그 영역에서의 자기간섭 신호 제거 시스템 구현 (Implementation of Self-Interference Signal Cancelation System in RF/Analog for In-Band Full Duplex)

  • 이지호;장갑석;김영식
    • 한국전자파학회논문지
    • /
    • 제27권3호
    • /
    • pp.277-283
    • /
    • 2016
  • 본 논문에서는 동일대역 전이중 통신을 위한 RF/아날로그 영역에서의 자기간섭 신호 제거 시스템을 설계 및 제작하여 성능을 검증하였다. 구현한 시스템은 NI5791 플랫폼과 NI Flex RIO를 이용하여 검증하였다. NI5791 플랫폼의 송신 출력을 높이기 위해 SKYWORKS SE2565T 전력 증폭기를 사용하였으며, 송 수신 안테나 선로는 써큘레이터를 사용하였다. 자기간섭 신호를 제거하기 위한 RF FIR 필터는 총 12개의 탭을 가지도록 설계하였고, 지연선로의 시간은 100 ps의 간격을 가지도록 설계하였다. 시스템의 동작은 전력 증폭기의 출력에서 10 dB 커플러를 이용하여 분배하였고, 각 탭 계수를 제어하여 안테나 반사와 써큘레이터 누설로 수신되는 간섭신호를 추정하여 차감하는 방식으로 자기간섭 신호를 제거하였다. 자기간섭 제거 시스템 실험은 2.56 GHz이고, 20 MHz 대역폭을 가지는 802.11a/g OFDM 변조 신호를 사용하였으며, 출력이 0 dBm에서 53 dB의 자기간섭 신호 제거 이득을 얻었다.