• 제목/요약/키워드: Antenna Modeling

검색결과 116건 처리시간 0.026초

DGPS 기준국 사이트 환경에 따른 안테나 성능 모델링 해석 (Analysis and modeling of DGPS antenna performance depending on the DGPS site environment)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.1022-1027
    • /
    • 2014
  • 본 논문에서는 DGPS 단축형 모노폴 안테나와 안테나 사이트 환경을 모델링하여 안테나 주변 환경에 따른 안테나 성능을 분석한다. DGPS 기준국 안테나의 성능 해석을 위한 모델링을 해석하고 대지 도전율이나 전파 장애물에 의한 안테나 성능을 모의 분석하여 DGPS 안테나 설치에 요구되는 사이트 환경을 정립한다. 일정한 접지 면에 적정한 방사형 접지를 갖는 안테나 사이트는 대지 도전율이나 전파 장애물로 인한 안테나 정합회로에 대한 영향은 적으나, 방사 효율 영향은 크게 나타난다. 안정된 DGPS 서비스를 위해서는 안테나 사이트의 양호한 대지 도전율이외에 주변에 전파 장애물이 없는 평탄한 안테나 사이트가 중요하다.

원형(Prototype) 안테나가 부착된 짐발의 안테나 유연특성 모델링 및 시스템 대역폭 결정 주요설계인자 (Modeling on an Antenna Flexible Characteristics of a Prototype Gimbal with an Antenna and Major Design Factors to determine a System Bandwidth)

  • 백주현
    • 대한기계학회논문집A
    • /
    • 제29권5호
    • /
    • pp.743-753
    • /
    • 2005
  • The model of azimuth driving servo system with a flexible antenna in a prototype gimbal has been derived in this work. The validity of the model is verified by comparing the result of the model with that of experiment. It is found that one should consider an antenna as a flexible body in case of modeling the dynamics of the gimbal with an antenna. It is also known that the effect of reducing backlash magnitude for extending the bandwidth in the system with a flexible antenna is smaller than the system with a stiff antenna. It is thought that the model-based design optimization of the gimbal with an antenna will be possible by virtue of the derived model, when a weight reduction and a bandwidth extension are required.

전자기파 탐색기의 안테나 유연특성 모델링 (Modeling of a Flexible Characteristics of the Antenna in a Microwave Seeker)

  • 백주현
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.1536-1541
    • /
    • 2003
  • The model of azimuth driving servo system with a flexible antenna in a microwave seeker has been derived in this paper. The validity of the model is verified by comparing the result of the model with that of experiment. It is found that one should consider an antenna as a flexible body in case of modeling the dynamics of the microwave seeker. It is also known that the effect of reducing backlash magnitude for extending the bandwidth in the system with a flexible antenna is smaller than that in the system with a stiff antenna. It is thought that the model-based design optimization of the microwave seeker will become possible by virtue of the derived model, when a weight reduction and a bandwidth extension are required.

  • PDF

Accurate FDTD Analysis of Bow-tie Antenna

  • Cho, Young-Il;Park, Dong-Hyuk;Park, Soeng-Ook
    • Journal of electromagnetic engineering and science
    • /
    • 제4권1호
    • /
    • pp.13-16
    • /
    • 2004
  • In this paper, FDTD analysis of the bow-tie antenna is investigated by incorporating static field solution that is suitable to the bow-tie antenna without increasing computational time. Transforming static feld solution to the rotated grid system, we can obtain the transformed static field solution which is able to represent field behavior near the oblique edge line of the bow-tie antenna. The result shows a good agreement with a MoM analysis and is compared conformal modeling technique and regular FDTD method.

유전기판에 마운트된 FZPL 안테나 시뮬레이션 (Simulation for FZPL Antenna on Mounted Dielectric Substrate)

  • 김태용
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 추계종합학술대회
    • /
    • pp.57-60
    • /
    • 2003
  • 위성 TV 수신 시스템, 전파 망원경 및 원격탐사 등에 응용할 수 있는 FZPL 안테나는 구조가 간단하고, 분해 조립이 간단하며 가격이 저렴한 장점이 있다. 이러한 렌즈형 안테나를 DAB/DMB용 수신기에 응용하기 위하여 TLM법을 적용하여 수치계산을 행하였다. FZPL 안테나는 유전기판에 마운트된 것으로 가정하였고, 시간응답 특성과 수신이득을 계산하였다. 계산건과 설계 초점거리에 대하여 계산된 초점거리는 약 25% 짧게 나타났으며, 수신이득은 18dB로 입사전력을 60여 배 증폭할 수 있는 것을 알았다.

  • PDF

Design and Control of a Marine Satellite Antenna

  • Won Mooncheol;Kim Sung-Soo
    • Journal of Mechanical Science and Technology
    • /
    • 제19권spc1호
    • /
    • pp.473-480
    • /
    • 2005
  • A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

The Design and Modeling of a Reconfigurable Inset-Fed Microstrip Patch High Gain Antenna for Wireless Sensor Networks

  • Phan, Duy-Thach;Chung, Gwiy-Sang
    • 센서학회지
    • /
    • 제20권3호
    • /
    • pp.145-150
    • /
    • 2011
  • In this paper, we designed a tunable microstrip patch antenna using RF MEMS switches. The design and simulation of the antenna were performed using a high frequency structure simulator(HFSS). The antenna was designed for use in the ISM band and either operates at 2.4 GHz or 5.7 GHz achieving -10 dB return-loss bandwidths of 20 MHz and 180 MHz, respectively. In order to obtain high efficiency and improve the ease of integration, a high resistivity silicon(HRS) wafer on a glass substrate was used for the antenna. The antenna achieved high gains: 8 dB at 5.7 GHz and 1 dB at 2.4 GHz. The RF MEMS DC contact switches were simulated and analyzed using ANSYS software.

산악지형에 적합한 경험적 중파 전파 모델링 (The Experimented MF Propagation Modeling for Mountain geography)

  • 김범창;권세웅;윤영중
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.18-22
    • /
    • 2003
  • In this thesis, Middle frequency wave propagation modeling is studied for the varies mountain geography the experimented middle frequency propagation model is researched in a shot time to analyze the broad area that consists of mountains. Due to the Sommerfeld - Norton model which is used broadly the middle frequency propagation model to analyze the broad area in a short time is proposed introducing the newly attenuation parameter of the experimental results on the basis of actual experiments at the mountain configuration regardless of the area of mountain, plane, sea etc.

  • PDF

DGPS를 위한 중파대역 모노폴 안테나 모델링 및 설계 (Modeling and Design of Medium-wave DGPS Monopole Antenna)

  • 나상근;이수원;김영완
    • 한국정보통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.797-804
    • /
    • 2014
  • 중파대역의 단축형 모노폴 안테나 설계는 저주파대역에서 실험적으로 도출된 제한된 데이터를 사용하여 안테나 설계를 기본적으로 설계하고 보정하는 방식을 사용하고 있다. 안테나 설계에 사용된 단순한 방법으로 중파대역의 단축형 모노폴 안테나의 정확한 성능 예측이 불가능하고, 다양한 지선식 단축형 모노폴 안테나 구조에 대한 성능 분석과 설계가 어려운 실정이다. 본 논문에서는 DGPS 중파대역 지선식 단축형 모노폴 안테나의 다양한 안테나 구조를 설계하고 성능을 분석할 수 있는 안테나 설계 모델을 정립하고, 지선식 단축형 모노폴 안테나의 설계 파라미터에 대한 안테나 성능과 설계 모델을 분석한다. 설계 모델의 적합성을 위하여 100 kHz 대역의 단축형 모노폴 안테나와 지선식 단축형 모노폴 안테나를 설계하여 기존의 설계 모델들과 성능 결과를 비교 분석한다. 기존 설계 모델과 거의 일치하는 특성 결과로 제안 모델을 활용하여 DGPS 안테나 설계 모델을 분석한다.

Probability of exceeding the serviceability limit of antenna masts

  • Kammel, Christian
    • Wind and Structures
    • /
    • 제4권4호
    • /
    • pp.353-366
    • /
    • 2001
  • With respect to serviceability, antenna masts should be designed so that wind-induced motion will not cause unacceptable lack of transmission for broadcasting users and wireless communication. For such antenna masts with directional radio transmission the serviceability limit state is predominantly governed by the tolerable change of the broadcasting angle of the mounted antenna assembly and therefore by the tip distortion of the mast. In this paper it will be shown that refinements of the present state of design of antenna masts are possible by using the statistics of extremes applied to extreme wind situations and by consideration of the statistical and reliability requirements given by the operator such as frequency and return period of passing the serviceability limit.