• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.72-75
• /
• 2016

In this paper, we proposes a internal antenna for wireless DVI dongle device using the folded monopole structure. The proposed antenna uses a basic structure of spiral and monopole. The antenna optimized for parameters length, gap, width, and rectangle of folded monopole antenna using the spiral structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The DVI dongle size of the proposed antenna is $50{\times}40{\times}1.6mm$, and the size of the antenna area is $10{\times}40mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The utilization possibility of the wireless DVI Dongle antenna have a folded monopole with spiral shape could be confirmed according to compare and analyze the simulation and measurement data.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.283-286
• /
• 2003

This paper presents a novel signal processing method for optimal beamforming of smart antenna system in cdma2000 1X mobile communication environments. This method utilizes characteristics of the reverse pilot channel of cdma2000 1X mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.885-888
• /
• 1999

Radiation characteristics of axial elementary current source on the cylindrical bianisotropic substrateloaded with bianisotropic superstrate layer are presented. The effects of bianisotropic superstrate cover on the radiation problems of a microstrip antenna are studied. This investigation is performed by using the Green function formulation in the spectral domain. Numerical results for the radiation pattern of the bianisotropic superstrate-loaded microstrip antenna is analyzed.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.5
• /
• pp.217-222
• /
• 2008

The characteristics of UHF antenna with microstrip structure was studied. Design parameters as center frequency, band width, and VSWR by slot length, stub was analyzed by HFSS simulator. UHF antenna with microstrip structure was fabricated using FR4_epoxy substrate of 4.4 dielectric constant.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.149-152
• /
• 2012

In this paper, a wideband monopole antenna with ring loop by modified ground plane is presented. The proposed antenna consist of monopole antenna, ring loop by ground plane. This antenna is fed CPW-fed and wide slot antenna of a novel structure for broadband characteristics is proposed. To enhance the impedance bandwidth of the wide slot antenna, we proposed the wide slot structure with CPW-fed which is combined with four ${\lambda}/2$ rectangular radiation modified monopole and inductively coupled. The measured impedance bandwidth is about 2.5 GHz(3.65~6.15 GHz) then less -10 dB.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.28-31
• /
• 2004

This paper describe analysis active microstrip antenna with low noise amplifier at 900 MHz for mobile communication. The microstrip patch antenna is integrated with low noise amplifier on a permittivity 4.5 (Epoxy-FR4) and thickness of substrate 1.6 mm. Low noise amplifier is designed by using GaAs FETs. The analysis characteristics of antenna include return loss, input impedance, vswr, radiation pattarn, bandwidth and gain of antenna. Mesurement gain of antenna is shown 19.2435 dBi.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.28-41
• /
• 2003

A micros-strip ring patch antenna with ultra wide band characteristics is presented. The proposed antenna is designed by a modified form of the annular ring patch antenna with modified microstrip feedline. The designed antenna gives 5.6GHz bandwidth with regular radiation pattern from 4.4GHz to 12.0GHz for -10dE return loss or VSWR of less than 2.0 in simulation, which is also excellently agreed with the measured data.

• ETRI Journal
• /
• v.30 no.3
• /
• pp.489-491
• /
• 2008

A compact dipole antenna for the terrestrial digital multimedia broadcasting (TDMB) application is presented. The length of the antenna is about $0.06{\lambda}$ at the TDMB resonance frequency of 190 MHz. Miniaturization of the antenna is achieved by using meander structures and lumped elements. The proposed antenna has two resonance frequencies and covers the TDMB band from 174 MHz to 216 MHz in Korea. The antenna has good impedance bandwidth and radiation characteristics for the TDMB. The experimental results of the designed dipole antenna are presented and analyzed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.16-24
• /
• 1996

In this paper, the radiation pattern of the monopole antenna mounted on the portable phone is analyzed. The analyzed model consists of a rectangular conductor box and a monopole antenna. Even though the radiation pattern of the monopole has been well known, the monopole antenna mounted on the portable phone has not been fully studied. Because of the conductor box, portable phone acts as an unbalanced dipole antenna whoe radiation patterns deviate fro those of th econventional isolated monopole antenna. Therefore, the analysis of the radiation patterns of unbalanced dopole antenna is necessary. Using the moment method, its radiation patterns are analyzed and the numerical results are verified through the measurements. In addition, the radiation patterns depending on various length of the conductor box and the monopole antenna are also presented and the dimension of the portable phone which gives excellent radiation characteristics are derived from the analyzed results.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.123-128
• /
• 2012

In communication systems, there are various types of microstrip antenna that can be used for many applications. This paper mainly focuses on the simple design of an inset rectangular microstrip patch antenna to operate at a frequency of 2.45 GHz for rectenna design. The study involves using an high frequency structure simulator to design the antenna dimensions and to determine its performance. This antenna is based on a thickness of 1.6 mm flame retardant 4 (FR-4) substrate having a dielectric constant of approximately 4.7, an inset feed, and a ground plane. After simulation, the antenna performance characteristics such as its return loss, voltage standing wave ratio, gain, and radiation pattern were obtained and compared with the fabricated measured antenna.