• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2073-2085
• /
• 2012

Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.125-125
• /
• 2018

반도체 소자의 미새화에 따라 선폭이 10nm 이하로 줄어듦에 따라, 금속 배선의 저항이 급격하게 상승하고 있다. Cu는 낮은 저항과 높은 전도도를 가지고 있어 현재 배선물질로써 가장 많이 사용되고 있지만, 소자가 미세화됨에 따라 Cu를 미래의 배선물질로써 계속 사용하기에는 몇 가지 문제점이 제기되고 있다. Cu는 electron mean free path (EMFP)가 39 nm로 긴 특성을 가지기 때문에, 선폭이 줄어듦에 따라 surface 및 grain boundary scattering이 증가하여 저항이 급격하게 증가한다. 또한, technology node에 따른 소자의 operating temperature와 current density의 증가로 인해 Cu의 reliability가 감소하게 된다. 텅스텐은 EMFP가 19 nm로 짧은 특성을 가지고 있어, 소자의 크기가 줄어듦에 따라 Cu보다 낮은 저항 특성을 가질 수 있으며, 녹는점이 3695K로 1357K인 Cu보다 높으므로 배선물질로써 Cu를 대체할 가능성이 있다. 본 연구에서는 Inductively Coupled Plasma (ICP) assisted magnetron sputtering을 통해 매우 얇은 텅스텐 박막을 증착하여 저항을 낮추고자 하였다. 고밀도 플라즈마의 방전을 위해, internal-type coil antenna를 사용하였으며 텅스텐 박막의 증착을 위해 DC sputter system이 사용되었다. 높은 에너지를 가진 텅스텐 이온을 이용하여 낮은 온도에서 고품위 박막을 증착할 수 있었으며, dense한 구조의 박막 성장이 가능하였다. ICP assisted를 이용하여 증착했을 때와, 그렇지 않을 때를 비교하여 ICP 조건에 따라서 박막의 저항이 감소함을 확인할 수 있었을 뿐만 아니라 최대 약 65% 감소함을 확인할 수 있었다. XRD를 이용하여 ICP power를 인가했을 때, 높은 저항을 갖는 A-15 구조를 가진 ${\beta}$ peak의 감소와 낮은 저항을 갖는 BCC 구조를 가진 ${\alpha}$ peak의 증가를 상온과 673K에서 증착한 박막 모두에서 확인하였으며, 이를 통해 ICP power가 저항 감소에 영향을 미친다는 것을 확인하였다. 또한, 두 온도 조건에서 grain size를 계산하여 ICP power를 인가함에 따라 두 조건 모두 grain size가 증가하였음을 조사하였다. 또한, XPS 분석을 통해 ICP power를 인가하였을 때 박막의 저항에 많은 영향을 끼치는 O peak이 감소하는 것을 통해 ICP assisted의 효과를 확인하였다. 이를 통해, ICP assisted magnetron sputtering을 통해 텅스텐 박막을 증착함으로써 차세대 배선물질로써 텅스텐의 가능성을 확인할 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.113-120
• /
• 2009

Through the automatic sensing of the environment, USN technology can give the best services. In this work, we have developed an active RFID system and examined its performance. By implementing it into water quality sensors, we constructed a system that can detect diverse indoor/outdoor environment and provide information about the pollution level obtained from the temperature and PH sensors. Our RF system had an internal Print-on-PCB antenna for the miniaturization of the tag. We used a RF transceiver CC2510 chipset of TI company to realize the active RFID function. By using RSSI constants obtained, we performed the evaluation of real time location accuracy with a software written in Labview. Among 10 arbitrary locations, we obtained average measurement errors of 1.69 m in x axis and 1.66 m in y axis. This technology can be applied to logistics, environmental monitoring, prevention of missing children and various applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2100-2112
• /
• 2011

An orthogonal code hopping multiplexing (OCHM) technique has been proposed for accommodating a large number of users with low channel activities than the number of orthogonal codewords through statistical multiplexing in downlink cellular systems. In this paper, a multiple input multiple output (MIMO) antenna based OCHM system is proposed to improve the performance. Each modulated symbol is repeated N times and the N repeated symbols are transmitted simultaneously using N transmit antennas. Through repetitions, the effect of perforations that the OCHM system experiences is decentralized among the repeated symbols and the full perforation probability is significantly reduced. Each receiver detect the transmitted signal using its pre-assigned code hopping pattern. Simulation results show that the proposed scheme saves the required energy for a given frame error rate (FER).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1864-1869
• /
• 2012

We make an interference analysis to obtain a critical ctiteria for coexisting availability of WLAN and WiBro between adjacent channels can be used in TVWS(TV White Space). To meet this analysis, we set the various transmission parameters including the emission and blocking mask, antenna height and gain, transmission power and bandwidth, channel model etc. And, based on these parameters, we analyze on performances according to a variation of guard band, a number of service user and allowable transmit power of the user operating in the adjacent channels. In this paper, we consider a urban environment and apply a Extended Hata-SRD for WLAN and an interference link and Extended Hata model for WiBro, respectively. With these results, we can see how each system can be shared in an adjacent channel.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.221-237
• /
• 2005

This paper presents and analyzes field test results of Equalization Digital On-Channel Repeater (EDOCR) using ATSC(Advanced Television Systems Committee) terrestrial digital TV broadcasting system. In the field test, according to EDOCR On/Off, types of antennas and receivers we measured reception possibility, C/N(Carrier to Noise Ratio), reception power, noise and input margin at each test point. By the field test results, the reception rate of the receiver manufactured in 2004 was $33\%$ when EDOCR is off and directional antenna is used. However, the reception rate was $100\%$ when EDOCR is on. In addition, the noise margin, which determines reception quality was increased at least 6 dB, so that it is capable of constructing SFN(Single Frequency Network) using the EDOCR.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.636-650
• /
• 2008

DTV has a great advantage as compared to Analog TV in picture quality under low reception field strength. Various high quality tuners have been developed to result in much smaller Noise Figure of the receivers and many trials for receiving DTV signal through indoor antenna. In this paper, results of intensive field tests on the indoor reception of DTV are presented. Tests were carried out around Seoul-Gyeonggi Metropolitan area. Commercial directional and omni-directional antennas and 5th generation receiver were used for reception availability tests. The effects of heights, locations, and types of the house as well as the distance to the transmitter on the reception performances are analyzed. Our test results will be applied to improve the indoor reception environment of DTV.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1828-1847
• /
• 2014

Coordinated multi-point (CoMP) transmission has been regarded as a potential technology for LTE-Advanced. In frequency division duplexing systems, channel quantization is applied for reporting channel state information (CSI). Considering the dynamic number of cooperation base stations (BSs), asymmetry feature of CoMP channels and high searching complexity, simply increasing the size of the codebook used in traditional multiple antenna systems to quantize the global CSI of CoMP systems directly is infeasible. Per-cell codebook based channel quantization to quantize local CSI for each BS separately is an effective method. In this paper, the theoretical upper bounds of system throughput are derived for two codeword selection schemes, independent codeword selection (ICS) and joint codeword selection (JCS), respectively. The feedback overhead and selection complexity of these two schemes are analyzed. In the simulation, the system throughput of ICS and JCS is compared. Both analysis and simulation results show that JCS has a better tradeoff between system throughput and feedback overhead. The ICS has obvious advantage in complexity, but it needs additional phase information (PI) feedback for obtaining the approximate system throughput with JCS. Under the same number of feedback bits constraint, allocating the number of bits for channel direction information (CDI) and PI quantization can increase the system throughput, but ICS is still inferior to JCS. Based on theoretical analysis and simulation results, some recommendations are given with regard to the application of each scheme respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.266-271
• /
• 2007

In mobile channel environments, the effect of the multi-path fading reduces the performance of the mobile communication severely. Previous studies on the effect of the multi-path fading show that, only the channel between fixed base stations and mobile terminals are considered. However, the future mobile communication service such as telematics may use the communication between moving mobile terminals, so called mobile ad-hoc communication, the studies on the channel is required for such situations. In this paper we have measured the mobile channel and analyzed the fading characteristics when using the linear array antennas. In the data measurements, we sent the QPSK modulated signal with carrier frequency of 2GHz band and received the signal using the array antennas equipped on moving vehicles. We have analyzed the fading characteristics and the effects of the fading reduction using the CDF of fading depth using data collected from two moving vehicles. The simulation results show that the beamforming technique adds 6 or 7dB to the fading margin than that of the selection diversity depending on channel environments.