• 상하수도학회지
• /
• 제13권4호
• /
• pp.54-61
• /
• 1999

SBR process used to evaluate the removal of organics, nitrogen and phosphorus on the basis of a report of research on a precedence at various operation cycle and condition change. Effluent concentration of COD were 50mg/l, 50mg/l, 90mg/l respectively, The removal rates of COD were nearly over 95% at Run 1, 2 and 4. But at Run 3, Effluent concentration of COD was 255.0mg/l, The removal rate of COD was 87% at Run 3. As Oxic/Anoxic rate was fixed and operating cycle of Oxic/Anoxic was changed, the removal rates of T-N were 74.7%, 46.9%, 28.5%, 63.3% respectively at Run 1~4. The case of Run 1 was best result. The removal rates of T-P was appeared in proportion to T-N removal rates and rest of $NO_2-N$. The removal rates of T-P were 51.2%, 35.5%, 41.5%, 51.9% respectively. The removal rates of COD, T-N, T-P were influenced on the change of SBR operation cycle. As organic loading rate was $1.43kgCOD/m^3day$ and C/N ratio was 3.0, operation cycle of Run 1 was best condition of T-N removal rates and T-P removal.

• 한국환경과학회지
• /
• 제13권7호
• /
• pp.675-680
• /
• 2004

This study was conducted to remove organics and nutrients using 2 stage intermittent aeration reactor. First reactor, using suspended microbial growth in intermittent aeration instead of anaerobic reactor in the typical BNR process, used minimum carbon source to release P, and it was possible to reduce ammonia loading going to second reactor. In the second reactor, using moving media intermittent aeration, it was effective to reduce nitrate in non-aeration time by attached microorganisms having long retention time. In aeration time, nitrification and P uptake were taken place simultaneously. From the experiment, two major results were as follows. First, the removal of organics was more than 90%, and optimum aeration/non-aeration time ratio for organic removal was corresponded with aeration/non-aeration time ratio for nitrogen removal. Second, in the first reactor, optimum aeration/non-aeration time ratio was 15/75 (min.) because it was necessary to maintain 75 min. of non-aeration time to suppress of impediment of return nitrate and to lead release of phosphate. In the second reactor, optimum aeration/non-aeration time ratio was 45/90 (min.).

• 대한환경공학회지
• /
• 제27권11호
• /
• pp.1222-1227
• /
• 2005

대표적인 질소제거 시스템인 무산소-산소공정을 대상으로 주어진 유입수 수질 조건에서 최대의 질소제거를 위한 최적의 슬러지 반송비를 질화/탈질 반응식을 이용하여 양론적으로 계산하였다. 양론적 계산에 고려된 수질 항목은 질화/탈질에 영향을 미치는 암모니아성 질소, 질산성질소, 알칼리도, COD, 용존산소로 설정하였다. 최대의 질소제거를 위한 최적의 슬러지 반송비를 앞의 5가지 유입수 항목으로 나타내었다. 양론적 계산에 의한 각 공정의 유출수와 최종 유출수 중의 TN농도가 실제 보고된 하 폐수 처리장의 TN농도와 잘 일치 하였다. 또한 양론적 계산에 의해 실제 처리장 최종 유출수 중의 TN농도를 ${\pm}5.0\;mg/L$ 내에서 예측 가능하였다.

• 한국환경과학회지
• /
• 제15권5호
• /
• pp.439-446
• /
• 2006

The effluent discharge standards of industrial wastewater has become more stringent since 2003. Many industrial wastewater treatment plants has been upgraded to advanced treatment facilities. There are high concentrations of nitrate(>200 mg/L) and ammonium(>50 mg/L) nitrogen in the acrylic fiber wastewater of H textile Co. Wastewater from acrylic fiber industry containing acrylonitrile, which may affect the subsequent biological treatment process. Manufacturing of acrylic fiber also produces shock loadings. Excessive acrylonitrile and polymer debris produced in the polymerization process was screened, coagulated with CaO and settled down. A preaeration system was added to treat this high pH effluent to remove volatile organic compound and ammonia nitrogen by the air stripping effect. it was found that nitrification rate was not sufficient in the Anoxic/Oxic(AO) process. One denitrification tank was converted to nitrification reactor to extend HRT of nitrification. Nitrification rate of ammonia nitrogen was promoted from 32% to 67% by this modification and effluent nitrogen concentration was well satisfied with the effluent standards since then.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.175-184
• /
• 2014

Weirs are conventional structures that control water level and velocity in streams to facilitate water resource management. Despite many weirs built in streams, there is little information how weirs change hydrology regime and how that translates to sediment and phosphorus (P) responses. This study evaluated the influence of weirs on P retention and mobilization in an urban tributary of the Han River in Korea. Total P concentrations in sediments upstream of weirs were higher than the downstream site, mainly due to the increase of potentially available fractions (labile P and aluminum- and iron-bound P) (p < 0.05). Equilibrium phosphorus concentrations ($EPC_o$) were lower than soluble reactive phosphorus (SRP) concentrations of stream waters, but there was an increasing trend of sediment $EPC_o$ upstream of weirs compared to the downstream site (p < 0.001) indicating a greater potential for P release upstream of weirs. Sediment core incubation showed that SRP release rates upstream of weirs were higher than the downstream site under anoxic conditions of the water column (p < 0.01), but not under oxic conditions. SRP release rates under anoxic conditions were greater than that measured under oxic conditions. Un-neutral pH and increased temperature could also enhance SRP release rates upstream of weirs. We conclude that weirs can increase P retention within stream sediments and potentially promote significant P releases into waters, which in turn cause eutrophication.

• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.196-202
• /
• 2016

Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권5호
• /
• pp.355-361
• /
• 2000

A recycling reactor system operated under sequential anoxic and oxic conditions for the treatment of swine wastewater has been developed, in which piggery slurry is fermentatively and aerobically treated and then part of the effluent is recycled to the pigsty. This system significantly removes offensive smells (at both the pigsty and the treatment plant), BOD and others, and may be cost effective for small-scale farms. The most dominant heterotrophic were, in order, Alcaligenes faecalis, Brevundimonas diminuta and Streptococcus sp., while lactic acid bacteria were dominantly observed in the anoxic tank. We propose a novel monitoring system for a recycling piggery slurry treatment system through the use of neural networks. In this study, we tried to model the treatment process for each tank in the system (influent, fermentation, aeration, first sedimentation and fourth sedimentation tanks) based upon the population densities of the heterotrophic and lactic acid bacteria. Principal component analysis(PCA) was first applied to identify a relationship between input and output. The input would be microbial densities and the treatment parameters, such as population densities of heterotrophic and lactic acid bacteria, suspended solids(SS), COD, NH$_4$(sup)+-N, ortho-phosphorus (o-P), and total-phosphorus (T-P). then multi-layer neural networks were employed to model the treatment process for each tank. PCA filtration of the input data as microbial densities was found to facilitate the modeling procedure for the system monitoring even with a relatively lower number of imput. Neural network independently trained for each treatment tank and their subsequent combined data analysis allowed a successful prediction of the treatment system for at least two days.

• 한국물환경학회지
• /
• 제20권6호
• /
• pp.571-576
• /
• 2004

Since anaerobic/anoxic/oxic process, which is a typical mainstream biological nitrogen and phosphorus removal process, utilizes influent organic matter as an external carbon source for phosphorus release in anaerobic or anoxic stage, influent COD/T-P ratio gives a strong influence on performance of phosphorus removal process. In this study, a bench scale experiment was carried out for SBR process to investigate nitrogen and phosphorus removal at various influent COD/T-P ratio and nitrate loadings of 23~73 and 1.6~14.3g $NO_3{^-}-N/kg$ MLSS, respectively. The phosphorus release and excess uptake in anoxic condition were very active at influent COD/T-P ratios of 44 and 73. However, its release and uptake was not obviously observed at COD/T-P ratio of 23. Consequently, phosphorus removal efficiency was decreased. In addition, the phosphorus release and uptake rate in anoxic condition increased as the nitrate loading decreased. Specific denitrification rate had significantly high correlation with organic materials and nitrate loadings of the anoxic phase too. The rate of phosphorus release and uptake in the anoxic condition were $0.08{\sim}0.94kg\;S-P/kg\;MLSS{\cdot}d$ and $0.012{\sim}0.1kg\;S-P/kg\;MLSS{\cdot}d$, respectively.

• 미생물학회지
• /
• 제38권2호
• /
• pp.113-118
• /
• 2002

혐기-무산소조건으로 구성된 회분식 반응조에서 질산염을 이용하여 인(P)도 동시에 제거될 수 있는 가능성을 알아보기 위해서 인의 제거 양상을 혐기-호기조건의 반응조와 비교하여 조사하였고, 질산염과 인을 동시에 제거하는 미생물분포를 분석하였다. 그 결과 비교적 낮은 농도의 유기물이 적용되었을 때(평균 CODcr=130mg/ι)두 반응조 모두 인이 효과적으로 제거되었으며 반응조내의 최종 인의 농도를 1 mg P/L. 이하로 유지하였다. 특히, 질산염을 전자수용체로 이용한 혐기-무산소조건의 반응조는 기존의 영양소제거 시스템과 비교하여 5-7 mg (P+N)/ι의 영양소를 추가적으로 제거하여 유기물의 효과적 인 이용이 가능한 것으로 판명되었다. 혐기-무산조 조건의 방응조내 미생물 분포를 조사 한 결과 질소원을 제거하는 미생물군(denitrifying bacteria)과 인을 제거하는 미생물군(polyphosphate accumulating bacteria)이 함께 존재하고 있음이 밝혀졌고, 이들 중 $\beta$-proteobacteria에 속하는 Zoogloea ramigera와 Rhodocyclus에 포함되는Alcaligenes defragrans 등은 탈질능력 이 있으면서 anoxic상태에서 인을 동시에 축적할 수 있는 탈질-탈인균주(denitrifying phosphate accumulating organisms; dPAO)로 조사되었다.

• 대한환경공학회지
• /
• 제29권12호
• /
• pp.1345-1352
• /
• 2007

퇴적물로부터 용출되는 영양염류가 인공호수인 남양호의 수질에 미치는 영향을 예측하기 위하여, 실험실에서 퇴적물의 조건을 호기 및 혐기조건으로 설정한 후 영양염류의 용출속도를 측정하였다. 퇴적물로부터 유기물과 질소의 용출은 일어나지 않는 것으로 판단된다. 인산염 인과 총인의 경우 수체 내 산소조건에 따라 용출 양상이 달랐는데, 혐기조건에서는 인이 용출되지 않은 반면, 호기 조건에서는 많은 양의 인이 용출되었다. 실험 결과를 기초로 호기조건에서 인의 용출 속도를 계산한 결과 인산염 인의 경우 $1.01\sim2.48$ mg-P/$m^2$/day이며, 총인의 경우는 $2.14\sim3.54$ mg-P/$m^2$/day로 나타났다. 상류에서 채집한 퇴적물에서 인의 용출 속도가 가장 빨랐는데, 이는 유입수에 쉽게 분해 가능한 유기물이 다량 포함되어 있기 때문으로 사료된다. 남양호의 경우 가장 깊은 하류의 수심이 $7\sim14$ m로 성층화가 이루어지지 않기 때문에, 대부분의 퇴적물 환경이 호기성 상태이다. 본 연구의 결과 남양호 퇴적물 중에 포함된 인이 호기성 상태에서 다량 용출되고 있기 때문에 인의 용출에 의한 수질 오염 문제에 대한 적절한 대책이 필요할 것으로 판단된다.