• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.228-235
• /
• 2004

In this thesis, it is designed efficient electrode formation on the organic luminescent device. ITO electrode is treated with $O_2$plasma. In order to inject hole efficiently, there is proposed the shape of anode that inserted plasma polymerized films as buffer layer between anode and organic layer using thiophene monomer. It is realized efficiently electron injection to aluminum due to introduce the quantum well in cathode. In the case of device inserted the buffer layer by using the plasma poiymerization after $O_2$plasma processing for ITO transparent electrode, since it forms the stable interface and reduce the moving speed of hole, the recombination of hole and electronic ate made in the omitting layer. Compared with the devices without buffer layer, the turn-on voltage was lowered by 1.0(V) doc to the introduction of buffer layer Since the quantum well structure is formed in front of cathode to optimize the tunneling effect, there is improved the power efficiency more than two times.

• Corrosion Science and Technology
• /
• v.5 no.3
• /
• pp.106-111
• /
• 2006

Painting has protected metallic stack but the paint films may be degraded and corrosion problem can be arisen. To protect the painted metal stack, cathodic protection can be applied. If cathodic protection is applied to bare metal, only small area may be protected. However, if cathodic protection is applied to painted metal surface, large area can be protected and the lifetime of paint films can be extended. High corrosion resistant alloys were corroded at a Flue Gas Desulfurization (FGD) facility of power plant within a short period and thus cathodic protection can be used to protect these metals. On the base of computer simulation, if cathodic protection is applied to bare metal in a FGD environment, it was estimated that applied current could almost be spent to protect area near the anode. However, if cathodic protection is applied to high resistant-coated metal, the much larger area from the anode could be effectively protected.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.315-319
• /
• 2015

Yttria-stabilized zirconia (YSZ)-based micro tubular SOFC single cells were fabricated by electrophoretic deposition (EPD) process. Stable slurries for the EPD process were prepared by adding phosphate ester (PE) as a dispersant in order to control the pH, conductivity, and zeta-potential. NiO-YSZ anode support, NiO-YSZ anode functional layer (AFL), and YSZ electrolyte were consecutively deposited on a graphite rod using the EPD process; materials were then co-sintered at $1400^{\circ}C$ for 4 h. The thickness of the deposited layer increased with increasing of the applied voltage and the deposition time. A YSZ-based micro tubular single cell fabricated by the EPD process exhibited a maximum power density of $0.3W/cm^2$ at $750^{\circ}C$.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.768-773
• /
• 1995

We describe a manufacturing method and characteristics on components of molten carbonate fuel cell. Cr, Al, AI$_{2}$O$_{3}$, Co, MgO powder were mixed with Ni powder for anode components and NiO was used for cathode electrode. The electrolyte plate consisted of LiAIO$_{2}$ and carbonate (Li$_{2}$CO$_{3}$/K$_{2}$CO$_{3}$=62/38) and these three were manufactured by doctor-blade method. As a result, open circuit voltage was 1.05[VI at Ni-10Cr anode and porosity was above 60[%].

• Journal of the Korean institute of surface engineering
• /
• v.12 no.1
• /
• pp.3-10
• /
• 1979

Many excellent Al-Zn-In anode have been developed up to the present. But for the purpose of the better performance of Al-Zn-In anodes in sea water the effect of calcium silicon addition on anodic polarization and current capacity of Al-Zn-In anodes was measured and analysed in sea water and artificial sea water. The results and conclusions obtained are summarized as follows. 1) Being compared with Al-Zn-In anodes, Al-Zn-In anodes containing 0.05% calcium silicon had superior characteristics in both anodic polarization and current capacity. 2) Corrosion patterns of the anodes containing calcium silicon were much more uniform than those of Al-Zn-In anodes. 3) In this experiment the most useful anode was Al-4% Zn-0.03% In-0.05% (Ca-Si). It had a capacity of 2.60Amp-hr of current/g and a voltage of 1.13(SCE reference) at anodic current density 1,000 4{\mu}A/cm^2$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.873-877
• /
• 2006

[ $Ta_2O_5$ ] 절연막을 제조하기 위하여 ANODE OXIDATION 공정을 수립하였다. Electrolyte에서의 전압강하는 정전류 모드에서 예상되는 전압의 변화에는 영향을 주지 않지만, 정전압 모드에서 전류의 변화에 영향을 주는 것으로 나타났다. 전해질에서의 전압 강하가 음극산화 전압과 같은 값을 갖는 경우, 전류는$Ta_2O_5$/전해질 계면에서의 전압강하가 증가함에 따라 logarithmic한 형태로 변화하는 것으로 나타났다. 음극 $Ta_2O_5$ 절연막 제조공정에 있어서 전해질에서의 전압 강하는 정전류 모드에서 두께의 손실을 발생시키지만, 정전압 모드에서 다시 복원되기 때문에, 최종 두께는 음극산화 전압에 비례하는 것으로 나타났다. 음극 $Ta_2O_5$ 절연막의 전기적 특성을 조사한 결과, 항복전압은 Electrolyte의 농도와 Anodization Current에 반비례하는 것으로 나타났다. 절연막의 두께가 $1500\AA$일 때 Breakdown Voltage는 350volt. 유전상수는 29로 측정되었다.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.38-57
• /
• 2021

The different weight ratios of Pd to Pt, i.e., 16:4, 10:10, 4:16 in Pd-Pt/C and Pd (20 wt. %) /C electrocatalysts with low metal loading were synthesized for glycerol electrooxidation in an air breathing microfluidic fuel cell (MFC). The cell performance on Pd-Pt (16:4)/C anode electrocatalyst was found best among all the electrocatalysts tested. The single cell when tested at a temperature of 35℃ using Pd-Pt (16:4)/C, showed maximum open circuit voltage (OCV) of 0.70 V and maximum power density of 2.77 mW/㎠ at a current density of 7.71 mA/㎠. The power density increased 1.45 times when cell temperature was raised from 35℃ to 75℃. The maximum OCV of 0.78 V and the maximum power density of 4.03 mW/㎠ at a current density of 10.47 mA/㎠ were observed at the temperature of 75℃. The results of CV substantiate the single cell performance for various operating parameters.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.266-271
• /
• 2021

A commercial PbO₂ electrode was adopted as the anode for the electrochemical degradation of the real textile effluent with the initial COD of 56.0 mg L^-1 and the stainless steel plate as the cathode. The effect of the initial pH, the electrolyte flow rate and the cell voltage on the COD, the current efficiency and the energy consumption were investigated without the addition of NaCl or Na₂SO₄. The experimental results illustrated that the PbO₂ electrode can reduce the COD of the textile effluent from 56.0 mg L^-1 to 26.0 mg L^-1 with the current efficiency of 86.1% and the energy consumption of 17.5 kWh kg^-1 (per kilogram of degraded COD) under the optimal operating conditions. Therefore PbO₂ electrode as the anode was promising to further electrochemically degrade the real textile effluent.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.54-58
• /
• 1999

We deposited diamond-like carbon (DLC) films using ion beam sputtering of a graphite target on flat substrates for use as a thin film field emitter. An n-type silicon wafer, titanium-coated silicon, and indium tin oxide (ITO) coated glass were used as a substrate. All films exhibited a sudden increase in the emission after a breakdown occurred at high voltage. The morphology of the films after the breakdown depended on the substrate. On ITO and Ti substrates, the DLC film peeled off upon breakdown, but on the Si substrate the surface melting due to breakdown resulted in the formation of various structures such as a sharp point, mound, and crater. By scanning the deformed surface with a tip anode, we found that the emission was concentrated at the deformed sites, indicating that the field enhancement due to the morphology change was responsible for the increased emission.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.354-362
• /
• 2017

We investigated the improvement in electrical characteristics of large AlGaN/GaN on Si Schottky barrier diode (SBD) induced by structural change to achieve a better trade-off between the forward and reverse performance to obtain high power conversion efficiency in PFC converter. Using an optimized dry etch condition for a large device, we fabricated three-types of SBD with 63 mm channel width: conventional, recessed, recessed dual-anode-metal SBD. The recessed dual-anode-metal SBD exhibited a very low turn-on voltage of 0.34 V, a high forward current of 1.63 A at 1.5 V, a leakage current of $114{\mu}A$ at -15 V, a breakdown voltage of 794 V.