• International Area Studies Review
• /
• v.15 no.2
• /
• pp.303-328
• /
• 2011

Over the past 30 years, China has maintained an annual growth rate of approximately 10%. But now China is confronted by an energy shortage and environmental pollution problems. In order to solve these environmental problems, China is not only making environmental laws and regulations to strengthen supervision, but also increasing the relevant budget. Environmental Management of Supply Chain is one of the most important tasks so that Chinese companies may effectively reduce environmental pollutions. Therefore, many empirical researches on environmental management of Chinese companies are very necessary. This study tested the actual effects on SCEM(Supply Chain Environmental Management) variables of Chinese enterprises in Shanghai and Shenyang. The results show that green design, green procurement, and extended producer responsibility have positive impacts on environmental outcomes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8_spc
• /
• pp.1266-1274
• /
• 2019

This paper presents a review of dairy goat production in sub-Saharan Africa (SSA) from 2010- 2017, its current state, constraints and prospects for research and development. Since the introduction of dairy goats in SSA in pre-colonial times, their populations have continued to increase due to declining land size as a result of land fragmentation and increasing demand for goat milk. The current goat population in SSA is 372,716,040 head of which only 15.98% used for milk production. Populations in the Eastern and Western regions of SSA have shown an increasing trend from 2010 to 2017. The Southern Africa goat population is on the decline at an annual rate of about 1.77% whereas Central Africa has had a constant goat population within the same period. Eastern Africa reported the highest increase in the population of goats used for milk production. Milk production was highest in Eastern Africa and lowest in Southern Africa. However, dairy goat productivity remained constant in the Eastern region throughout the review period. Dairy goats are mainly raised under smallholder mixed crop-livestock systems. To enhance the development of the dairy goat, concerted efforts should be made to alleviate the constraints that stifle its growth. These constraints can be categorized into nutrition and feeding, breeding and reproduction, diseases, parasites, climate change, and underdeveloped dairy goat products market. Effective management of dairy goats requires a holistic approach and there is the need to expand the markets by further sensitization on the nutritional and medicinal advantages of dairy goat products. In order to achieve rapid development in the dairy goat sub sector, research and development initiatives should be directed towards alleviating the hurdles in nutrition and feeding, breeding, animal health and resilience as well as dairy goat markets.

• The Journal of Society for e-Business Studies
• /
• v.26 no.1
• /
• pp.67-78
• /
• 2021

The number of domestic e-commerce transactions has been breaking its own record by an annual average growth rate of over 20% based on volume for the past 5 years. Due to the rapid increase in e-commerce market, retail companies that have difficulty meeting consumers in person are in fierce competition to take the lead in the last mile service, which is the only point of contact with customers. Especially in the delivery area, where competition is most intense, the role of the fulfillment center is very important for service differentiation. It must be capable of fast product preparation ordered by consumers in accordance with the delivery service level. This study focuses on the order picking system for rapid order processing in the fulfillment center as an alternative for companies to gain competitive advantage in the e-commerce market. A mixed integer programming model was developed and implemented to optimize the stock replenishment in order picking facilities. The effectiveness was scientifically and objectively verified by simulation using the actual operation process and data.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.4
• /
• pp.9-15
• /
• 2020

As of 2018, total yield of lettuce and strawberry amounted to 93,543 tons (representing 1.0 percent) and 183,639 tons (2.0 percent), respectively, among total yields worth 9,185,889 tons in South Korea. Lettuce is affected by a combination of numerous elements such as varieties, cultivation methods and pests during each growth phase (Lee et al., 1999). It is mainly cultivated in spring and fall. Especially due to respiration rate after harvest leading to reduced quality and poor storage, maintaining annual supply is unavailable (Jang et al., 2018). With the distribution of new varieties, forcing culture and indoor insulated facilities for plant cultivation during winter, strawberries are produced every year except for late summer and early fall. Due to active respiration, transpiration, soft flesh and high water content, the fruit is vulnerable to go bad and got rotten compared to other fruits. Furthermore, it is difficult to maintain freshness due to the possibility of softening, discoloration and fungi (Lee et al., 2012). In this regard, developing improved storage and package techniques is needed to ensure maintaining quality and safety even just two to three days after harvest. In order to ensure improved quality and safety of strawberries and lettuce after harvest, the present study applied a modified atmosphere packaging (MAP) technology (Mostofi et. al., 2008). Going forward, it compared the quality and safety of the two products while being stored in a way that put them in an MAP-applied container and a plastic container at room temperature and 4 degree Celsius.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.217-225
• /
• 2022

We analyzed efficiency and productivity of the Indian non-life insurance market affected by the COVID-19 pandemic from 2020. Using data envelopment analysis(DEA), we examined non-life insurance companies selling health insurance products in India from FY2013 to FY2019. We found the followings. First, average efficiency of the entire non-life insurance industry worsened in the beginning yet improved later. Second, analyzing the efficiency measures by group, we found that private insurance companies had the highest efficiency, followed by state-run insurance companies and pure health insurance companies. Third, average annual productivity growth rate of companies operating distance selling channels including telemarketing is higher than that of traditional face-to-face channels. During and after the COVID-19 pandemic, therefore, Indian non-life insurance companies should focus their resources and efforts on the development of distance selling channels when establishing business strategies. Besides, it would be interesting to extend our analysis to the post-coronavirus period and we leave this for future research.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.183-188
• /
• 2022

It is a difficult task to estimate parameters in even a simple stock assessment model such as a surplus production model, using only data about temporal catch-per-unit-effort (CPUE) (or survey index) and fishery yields. Such difficulty is exacerbated when time-varying parameters are treated as random effects (aka state variables). To overcome the difficulty, previous studies incorporated somewhat subjective assumptions (e.g., B₁=K) or informative priors of parameters. A key is how to build an objective joint prior of parameters, reducing subjectivity. Given the limited data on temporal CPUEs and fishery yields from 1999-2020 for common squid Todarodes pacificus, we built a joint prior of only two parameters, intrinsic growth rate (r) and carrying capacity (K), based on the resilience level of the population (Froese et al., 2017), and used a Bayesian state-space production assessment model. We used template model builder (TMB), a R package for implementing the assessment model, and estimating all parameters in the model. The predicted annual biomass was in the range of 0.76×10⁶ to 4.06×10⁶ MT, the estimated MSY was 0.13×10⁶ MT, the estimated r was 0.24, and the estimated K was 2.10×10⁶ MT.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.3
• /
• pp.155-165
• /
• 2022

Background: Chronic obstructive pulmonary disease (COPD) is not completely reversible and requires long-term management with appropriate treatment. This study aimed to analyze trends in treatment regimens and medication costs for COPD patients using a national claims database. Methods: We conducted this analysis using National Patient Sample data from the Health Insurance Review and Assessment Service covering the period from 2015 to 2018. We have constructed a dataset comprising COPD disease classification codes J43.x and J44.x (based on KCD-7 code, J43.0 was excluded) and compiled a list of drugs fitting current guidelines. To identify trends, we calculated frequency, ratio, and compound annual growth rate (CAGR) using the numbers of prescriptions and patients. Results: The number of COPD patients was 7,260 in 2018, slightly decreased from 2015. Most of these COPD patients were aged 60 or older and included a high proportion of males (72.2%; 2018). The number of patients prescribed inhaled medications increased gradually from 2015 to 2018 (9,227 (47.1%); 2015, 9,285 (51.5%); 2018), while the number of patients prescribed systemic beta-agonists and Xanthines has decreased since 2015 (CAGR -14.7; systemic beta-agonist, -5.8; Xanthines). The per capita cost of medication has increased by 0.4% (KRW 206,667; 2018, KRW 204,278; 2015) annually during the study period. Conclusion: This study showed that treatment with inhaled medications had continuously increased in accord with changing guidelines, but oral medications were still widely used. It is necessary to emphasize the importance of inhaled medications in treating COPD to reduce additional economic burden through appropriate medication use.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.1
• /
• pp.7-14
• /
• 2023

We attempted to provide an overview of the laws and current state of the 3D printing industry in South Korea and around the world, using the annual industry surveys and the Wohler report. Additionally, we reviewed articles relating to the potential exposure to hazards associated with 3D printing using metal materials. In South Korea, there were 406 3D printing-related businesses, employing 2,365 workers, and the market size was estimated at 455.9 billion won in 2021. Globally, the average growth rate of the 3D printing industry market over the past 10 years was 27.4%, and the market size was estimated at $11.8 billion in 2019. The United States had the highest cumulative installation ratio of industrial 3D printers, followed by China, Japan, Germany, and South Korea. A total of 6,168 patents related to 3D printing were registered in the US between 2010 and 2019. Harmful factors during metal 3D printing was mainly evaluated in the powder bed fusion and direct energy deposition printing types, and there is a case of material extrusion type with metal additive filaments. The number, mass, size distribution, and chemical composition of particles were mainly evaluated. Particle concentration increases during the opening of the chamber or post-processing. However, operating the 3D printer in a ventilated chamber can reduce particle concentration to the background level. In order to have a safe and healthy environment for 3D printing, it is necessary to accumulate and apply knowledge through various studies.

• Journal of Biomedical Engineering Research
• /
• v.45 no.4
• /
• pp.162-172
• /
• 2024

To analyse the overall research trends in digital therapeutics, this study conducted a quantitative bibliometric analysis of articles published in the last 10 years from 2014 to 2023. We extracted bibliographic information of studies related to digital therapeutics from the Web of Science (WOS) database and performed publication status, citation analysis and keyword analysis using R (version 4.3.1) and VOSviewer (version 1.6.18) software. A total of 1,114 articles were included in the study, and the annual publication growth rate for digital therapeutics was 66.1%, a very rapid increase. "health" is the most used keyword based on Keyword Plus, and "cognitive-behavioral therapy", "depression", "healthcare", "mental-health", "meta-analysis" and "randomized controlled-trial" are the research keywords that have driven the development and impact of digital therapeutic devices over the long term. A total of five clusters were observed in the co-occurrence network analysis, with new research keywords such as "artificial intelligence", "machine learning" and "regulation" being observed in recent years. In our analysis of research trends in digital therapeutics, keywords related to mental health, such as depression, anxiety, and disorder, were the top keywords by occurrences and total link strength. While many studies have shown the positive effects of digital therapeutics, low engagement and high dropout rates remain a concern, and much research is being done to evaluate and improve them. Future studies should expand the search terms to ensure the representativeness of the results.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.34-43
• /
• 1996

We investigated the vegetation structure, and effects of canopy degree(gap or purlieu to 25%, 50%, 75%, over 75%) of the overstory on seedling regeneration and survivorship, and sapling density, growth and growth type of Abies koreana in subalpine of Mt. Chiri. The stem density in Abies koreana stand was higher in middle story than upper story, individual trees in upper story occupied larger area and were more apart, resulted in uniform distribution. The regeneration and survivorship of seedlings and saplings were best in 25% of crown closure, in order of 50%, gap, but lowest in over 75% of crown closure. The annual growth rate and recent 5 years growth rate of saplings were highest in gap or purlieu and getting lower toward gradually higher coverage of overstory. And 10- to 20-Year-old saplings were mainly regenerated in stands with lower density(I or II), but most of 20 to 30 years old saplings were growing in stands with higher density (III or IV). The number of "A" type saplings grown normally in gap or purlieu was gradually decreased in stand with higher density but the number of "D" or "E" types of which growth was supressed or prohibited by the high density was abruptly increased. Saplings normally growing in the gap and purlieu showed the panicle type, but those grown under dense crown were greatly suppressed and showed the umbellate type.