• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.84-84
• /
• 2022

The limit of crop cultivation is moving northward due to the temperature rise by climate change. There is a problem with crop growth if early sowing is performed at a time when the temperature is low. It is difficult to secure crop productivity and cultivation stability due to the low temperature and short cultivation period. Therefore, this study was conducted to analyze the change in growth characteristics and yield of corn for grain when early sowing is performed in central region of South Korea. This experiment was conducted at experimental field of Suwon in 2021. Three varieties of corn for grain such as Kwangpyeongok, Sinhwangok, and Hwangdaok were sown at intervals of 5 days from 20 March to 15 April. The planting density at this time was sown with a row interval of 70 cm and a plant interval of 25 cm. Nitrogen, phosphoric acid, and potassium fertilizers were applied at 17.4 kg, 3.0 kg, and 6.9 kg per 10a, respectively. Phosphoric acid and potassium fertilizers were all applied before sowing and nitrogen fertilizer was applied 50% before sowing and 50% in the fifth leaf period. The corn growth characteristics and yield components were investigated. The seedling establishment rate by sowing date was in the range of 68.5~88.5%, and it showed a difference depending on the variety. The range of days from sowing to tassel and silk emergence by sowing date was 79.9~98.4 and 81.0~98.9 days, respectively. As the sowing date was delayed, the days from sowing to tassel and silk emergence decreased. The growth characteristics and yield of corn by sowing date are as follows. Plant height was the highest at 241.3 cm at the sowing on 25 March, and Stalk diameter was the thickest at 25.6 mm at the sowing on 31 March. The fresh weight per plant was the highest at 728 g at the sowing on 25 March, and the dry weight per plant was the highest at 185 g at the sowing on 31 March. Corn growth characteristics did not show a certain trend depending on the sowing date, and corn growth was more vigorous at the sowing on March 25 and 31 than the others. In the case of ear weight, it was the heaviest with 344 g at the sowing on 25 March, and filled ear length ratio showed a tendency to decrease as the sowing time was delayed. The weight of 100 grains and grain yield per 10a of maize were the highest at 36.0g and 878.7kg/10a, respectively at the sowing on 25 March. Although the growth and yield of corn for grain were good during early sowing in the central region of South Korea, it is necessary to investigate the limit temperature for early sowing of corn by examining the annual variation according to weather conditions.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.4
• /
• pp.342-347
• /
• 2008

Mortality and growth rate of the soft coral, Dendronephthya gigantea, from Jejudo Island on the southern coast of Korea were investigated from February 2003 to October 2004 using SCUBA diving. 48 individuals with variable sizes of D. gigantea of the depth of 15m were tagged with flagging tapes and plastic films, and then monitored with two month intervals. The average mortality of two-month term for the study period was 50.4%, with the peak of 84.6% during the summer storms in August - October 2003. About the size class mortality, individuals of size class I(${\leq}$10 cm) showed the highest mortality, followed by size class III(>20 cm) and size class II(10 cm-20 cm). Growth rate did not show a seasonal pattern. For growth in length, individuals of D. gigantea grew about 3cm in average for two-month period, with a maximum growth of 6.4 cm which occurred in August - October 2003. For growth in diameter, individuals grew about 0.3 cm for 2 month term, with a maximum of 1.4cm in April - June 2004. Individuals of size class I usually grew faster than those of larger size classes. D. gigantea population in Jejudo Island was strongly affected by summer storms, which was due to annual event of summer typhoon. Never the less, it appears that the local population can be maintained by fast growth of the juvenile stage and active recruitment to compensate the high mortality caused by the summer disturbance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.6
• /
• pp.563-574
• /
• 1986

The structure of gonads, gametogenesis and reproductive cycle of the jackknife clams, Solen strictus and Solen gordonis were investigated mainly by histological observation. The first species used were monthly sampled at the coastal area of Dadaepo, Pusan, Korea and Naechodo, Kunsan, Korea for one year from February 1982 to January 1983. The second species were monthly sampled at the sand beach of Dadaepo, Pusan, Korea, from February 1982 to January 1983. Sexualities of Solen strictus and Solen gordonis are dioecious, and these species are oviparous. The gonads are irregularly arranged from the subregion of mid-intestinal gland in visceral cavity to reticular connective tissue of foot. The ovary was composed of a number of small ovarian sacs and the testis was composed of several testicular lobuli which from the tubular structure. Early multiplicating oogonium was about $10{\mu}m$ in diamater. Nucleus and nucleolus, at that time, were distinct in appearance. Each of the early growing oocytes made an egg-stalk, connected to the germinal epithelium of the ovarian sac. A great number of undifferentiated mesenchymal tissue and eosinophilic granular cells are abundantly distributed in the ovarian sacs in the early development stages. With the further development of gonad, these tissue and cells gradually disappeared. Then the undifferentiated mesenchymal tissue and eosinophilic granular cells function as nutritive cells in the formation and development of the early stage germ cells. Mature oocytes were free in the lumen of ovarian sacs and gradually become round or oval. Ripe oocyte was about 80 to $90{\mu}m$ in diameter. With the further development of testis, each of the testicular lobuli formed stratified layers composed of spermatogonia, spermatocytes, spermatids and spermatozoa in groups on the germinal epithelium. After spawning, the gonad gradually degenerated, and disorganized completely. Then new differentiated tissues were rearranged next year. The annual reproductive cycle of those species could be classified into five stages; multiplicative, growing, mature, spent, degenerative and resting stage. It seems that the spawning season is closely related to the water temperature, and the spawning of Solen strictus occurs from June to July at above $20^{\circ}C$ in water temperature. The peak spawning season appeared in June at Dadaepo and in July at Kunsan, The spawning of Solen gordonis occurs from May to June with the peak spawning season in June. Percentages of the first maturity in female of Solen strictus ranging from 5.1-6.0 cm and 7.1-8.0 cm in shell length were $50\%$ and $100\%$, respectively.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.105-115
• /
• 2016

This study was carried out to establish the optimum forest management plan for the Cryptomeria japonica plantations in southern inland and Jeju island in Korea. Sixty seven circular sample plots of 0.04ha were established and we surveyed vegetation structure and growth characteristics from three layers(upper, middle, and lower). As a result of cluster analysis obtained by importance values of each tree species, the community type of C. japonica stands were classified into C. japonica group(C1) and C. japonica-C obtusa group. C. obtusa community were also sbudivided into P. thunbergii-Q. serrata group(C2) and Q. serrata-C obtusa group(C3). In tree layers importance value(IV) of C. japonica were 97.2% in C1, 80.7% in C2, and 47.6% in C3 and in sub-tree layers IV were 8.9% in C1, 15.2% in C2, and 5.7% in C3. Especially in C3 there are bamboo species (Smilacina japonica var. lutecarpa and Pseudosasa japonica) it is necessary for us to control them. In shrub layers C. japonica were found in C1(9.2%) and C2(7.0%), but except for C3. In tree layer species diversity indices of each community ranged from the lowest 0.059 in C1 to the highest 0.548 in C3. Dominance ranged from 0.958 in C1 to 0.393 in C3 which may caused by interspecific competition. Current annual increment of diameter growth ranged from 7.01mm/yr to 8.04mm/yr. As a result of our study we recommend the application of proper thinning and pruning for C1 and C2.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.528-536
• /
• 2012

This study has compared the different types of forest fires(unburned, crown fire, ground fire) and the degree of vegetation recovery at Samcheuk-si, Gangwon-do by assessing the biomass and net primary production from July 2007 through July 2010. The research showed that the average biomass of unburned site(Un), crown fire site(C-1), crown fire site(C-3), ground fire site(G-2) were $181.20{\pm}5.39$, $62.04{\pm}4.38$, $131.09{\pm}14.38$, $63.39{\pm}2.72ton{\cdot}ha^{-1}$, respectively. And the research showed that the average net primary production of unburned site(Un), crown fire site(C-1), crown fire site(C-3), ground fire site(G-2) were $4.17{\pm}0.56$, $3.27{\pm}1.56$, $11.51{\pm}0.53$, $2.10{\pm}0.31ton{\cdot}ha^{-1}{\cdot}yr^{-1}$, respectively. Quercus mongolica $DH_{10}$(Diameter at the 10cm tree height) growth rate at each plot was compared to the crown fire site(C-1) in the annual average $1.21{\pm}0.55mm{\cdot}yr^{-1}$ at the speed of the fastest growth follows; showed crown fire site(C-3), ground fire site(G-2), unburned site(Un) appeared in the order. And that showed the growth rate of height was highest in the $15.43{\pm}4.57cm{\cdot}yr^{-1}$ at crown fire site(C-3), then the crown fire site(C-1), and ground fire site(G-2), and lowest in the unburned site(Un).

• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.12-19
• /
• 2010

Optimum nitrogen fertigation level by soil testing was determined on the growth and yield of eleven-year-old 'Campbell Early' (Vitis labrusca L.) grapevine in a sandy loam soil from 2005 to 2007. Fifty percent of the annual application of the nitrogen rate (195 kg/ha/yr) was top-dressed as basal fertilizer in all treatments, and the remainders were drip-irrigated with fertigation rate at 25 (12.5% of total N, N 1/4 level of the remainder), 50 (25% of total N, N 1/2 level), and 100 mg/L (50% of total N, N 1 level) in intervals of twice (2.1 mm/times) a week for 12 weeks, and the effect of N drip fertigation was compared to control which the N remainder was applied with surface application as an additional fertilizer. The results showed that chlorophyll content reading in SPAD value and N contents of leaves increased as nitrogen fertigation level increased. Also observed was the growth of the internode and stem diameter of shoots which were longest at N 1/2 level among the treatments conducted both in 2005 and 2006. It was also noted that yield of the fruit was different every year, where average yield for three years was recorded highest in N 1/4 level, and lowest in N 1 level compared to control(surface application). Soluble solid content and titratable acidity of fruit juice were also not significant during the treatments, the maturation of fruits tended to be retarded in N 1 level. The study proved that N 1/4 (N 25 mg/L) levels of fertigation based on soil testing was most efficient in obtaining optimum yield and also, fertigation of grapevine at open field condition reduces the use of nitrogen fertilizer.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2009

Accurate solar radiation data are critical to evaluate major physiological responses of plants. For most upland crops and orchard plants growing in complex terrain, however, it is not easy for farmers or agronomists to access solar irradiance data. Here we suggest a simple method using a sun-slope geometry based topographical coefficient to estimate daily solar irradiance on any sloping surfaces from global solar radiation measured at a nearby weather station. An hourly solar irradiance ratio ($W_i$) between sloping and horizontal surface is defined as multiplication of the relative solar intensity($k_i$) and the slope irradiance ratio($r_i$) at an hourly interval. The $k_i$ is the ratio of hourly solar radiation to the 24 hour cumulative radiation on a horizontal surface under clear sky conditions. The $r_i$ is the ratio of clear sky radiation on a given slope to that on a horizontal reference. Daily coefficient for slope correction is simply the sum of $W_i$ on each date. We calculated daily solar irradiance at 8 side slope locations circumventing a cone-shaped parasitic volcano(c.a., 570m diameter for the bottom circle and 90m bottom-to-top height) by multiplying these coefficients to the global solar radiation measured horizontally. Comparison with the measured slope irradiance from April 2007 to March 2008 resulted in the root mean square error(RMSE) of $1.61MJ\;m^{-2}$ for the whole period but the RMSE for April to October(i.e., major cropping season in Korea) was much lower and satisfied the 5% error tolerance for radiation measurement. The RMSE was smallest in October regardless of slope aspect, and the aspect dependent variation of RMSE was greatest in November. Annual variation in RMSE was greatest on north and south facing slopes, followed by southwest, southeast, and northwest slopes in decreasing order. Once the coefficients are prepared, global solar radiation data from nearby stations can be easily converted to the solar irradiance map at landscape scales with the operational reliability in cropping season.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.422-430
• /
• 2014

This study was conducted to investigate growth changes of DBH, height, crown width, volume, stem biomass, and dead trees after thinning treatments with different thinning intensity for Korean white pine (Pinus koraiensis) plantation. First thinning was applied with 29~69% intensity based on number of trees in 19-yearold plantation, and trees were measured three times: right after thinning (19-year-old), 5 years later (24-yearold), 12 years later (29-year-old). In the case of DBH growth, average DBH growth of heavily thinned plots was 19.6~19.9% higher 5 years later, and 13.3~24.7% higher 12 years later, compared to that of unthinned plots. Initial diameter growth rate was higher than late growth rate. The proportion of large pole candidates ($DBH{\geq}25cm$) was 31% in heavily thinned plot while only 2% was shown in unthinned plot. No difference was shown in height growth depending on plots, and average crown width growth in heavily thinned plots was 30.6~33.3% higher, 5 years later, and 35.0~40.0% higher, 12 years later, compared to that of unthinned plots. Average volume growth of individual trees in heavily thinned plots was 39.8~46.8% higher, 5 years later, and 23.0~52.0% higher, 12 years later, compared to unthinned plots. The maximum volume and biomass per unit area were shown in unthinned plot; the volume and biomass 5 and 12 years later after thinning were $133m^3/ha$ (51 kg/ha) and $344m^3/ha$ (132 kg/ha), respectivily. The significant difference appeared in crown width, volume, and biomass depending on thinning intensity. No dead trees occurred in heavily thinned plots for 12 years after thinning, while mortality rate in unthinned plots was 27.9~37.8%. As a result of analyzing annual increment using cores to determine the timing of second thinning, it suggested that second thinning be suitable around 10 years after first thinning.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.1
• /
• pp.35-47
• /
• 2014

The purpose of the study is to evaluate the pollution level (gaseous and particle phase) in the public facilities for the PAHs, non-regulated materials, forecast the risk level by the health risk assessment (HRA) and propose the guideline level. PAH assessments through sampling of particulate matter of diameter < 2.5 ${\mu}m$ ($PM_{2.5}$). The user and worker exposure scenario for the PAHs consists of 24-hour exposure scenario (WIES) assuming the worst case and the normal exposure scenario (MIES) based on the survey. This study investigated 20 PAH substances selected out of 32 substances known to be carcinogenic or potentially carcinogenic. The risk assessment applies major toxic equivalency factor (TEF) proposed from existing studies and estaimates individual Excess Cancer Risk (ECR). The study assesses the fine dusts ($PM_{2.5}$) and the exposure levels of the gaseous and particle PAH materials for 6 spots in each 8 facility, e.g. underground subway stations, child-care facilities, elderly care facilities, super market, indoor parking lot, terminal waiting room, internet caf$\acute{e}$ (PC-rooms), movie theater. For internet caf$\acute{e}$ (PC-rooms) in particular, that marks the highest $PM_{2.5}$ concentration and the average concentration of 10 spots (2 spots for each cafe) is 73.3 ${\mu}g/m^3$ (range: 6.8-185.2 ${\mu}g/m^3$). The high level of $PM_{2.5}$ seen in internet cafes was likely due to indoor smoking in most cases. For the gaseous PAHs, the detection frequency for 4-5 rings shows high and the elements with 6 rings shows low frequency. For the particle PAHs, the detection frequency for 2-3 rings shows low and the elements with 6 rings show high frequency. As a result, it is investigated that the most important PAHs are the naphthalene, acenaphthene and phenanthrene from the study of Kim et al. (2013) and this annual study. The health risk assessment demonstrates that each facility shows the level of $10^{-6}-10^{-4}$. Considering standards and local source of pollution levels, it is judged that the management standard of the benzo (a)pyrene, one of the PAHs, shall be managed with the range of 0.5-1.2 $ng/m^3$. Smoking and ventilation were considered as the most important PAHs exposure associated with public facility $PM_{2.5}$. This study only estimated for inhalation health risk of PAHs and focused on the associated cancer risk, while multiple measurements would be necessary for public health and policy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.423-433
• /
• 2019

In order to predict the seabed topography change due to the construction of offshore wind power structures in the west-southern sea of Korea, field observations for tides, tidal currents, suspended sediment concentrations and seabed sediments were carried out at the same time. These data could be used for numerical simulation. In numerical experiments, the empirical constants for the suspended sediment flux were determined by the trial and error method. When a concentration distribution factor was 0.1 and a proportional constant was 0.05 in the suspended sediment equilibrium concentration formulae, the calculated suspended sediment concentrations were reasonably similar with the observed ones. Also, it was appropriate for the open boundary conditions of the suspended sediment when the south-east boundary corner was 11.0 times, the south-west was 0.5 times, the westnorth 1.0 times, the north-west was 1.0 times and the north-east was 1.0 times, respectively, using the time series of the observed suspended sediment concentrations. In this case, the depth change was smooth and not intermittent around the open boundaries. From these calibrations, the annual water depth change before and after construction of the offshore wind power structures was shown under 1 cm. The reason was that the used numerical model for the large scale grid could not reproduce a local scour phenomenon and they showed almost no significant velocity change over ± 2 cm/s because the jacket structures with small size diameter, about 1 m, were a water-permeable. Therefore, it was natural that there was a slight change on seabed topography in the study area.