• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.199-202
• /
• 2006

The hardening and anisotropy based on the crystal plasticity is considered in the numerical simulation of hemispherical sheet forming process to find more realistic simulation results For calculating the yield shear stresses of each crystal, Taylor's model of the crystalline aggregate is employed. The yield stress of crystalline aggregate is computed by averaging the yield stresses of the crystal. The hardening is evaluated by using the Taylor factor and the critical resolved shear stress of the crystal. In addition, by observing the crystallographic texture and slip system, the anisotropy of the sheet is traced during the forming process. The anisotropy and hardening behaviors of the sheet found by the crystal plasticity are described better than those of obtained from the Hill's quadratic criterion based on the continuum plasticity.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.17-23
• /
• 1984

A model analysis of pattern shift in the epitaxial growth of silicon on (111) substrates was performed. The growth rate anisotropy was considered as the most important affecting factor of pattern shift, and for the model establishment the off angle of the substrate and the process temperature were taken as the variables. We derived a theoretical equation of pattern shift by assuming the growth rate anisotropy as the trigonometric sine function of the off angle of the substrate and defining the growth rate anisotropy factor related to the process temperature. The pattern shift ratio calculated by this model had the same tendency with the experimental ones, which, however, were about twice greater than those. It was supposed that this discrepailcy was due to the second order affecting factor such as facetting and step broadening which had been exluded in model establishment.

• 한국해양공학회지
• /
• 제9권1호
• /
• pp.92-100
• /
• 1995

The effect of different anisotropy and stress ratio on fatigue crack propagation behavior was investigated under various stress ratio(R=-0.4, -0.2, 0.2, 0.2, 0.4) using pure titanium sheet used in aerospace, chemical and food industry. The rack closure behavior under constant load amplitude fatigue crack propagation test was examined. Fatigue crack propagation rate da/dN was estimated in terms of effective stress intensity factor range, $\Delta$K$_{eff}$, regardless of various stress ratio but was influenced by anisotropy. Also, it was found that the effect of anisotropy was considerably decreased but still not negligible when he da/dN was evaluated by a conventional parameter, $\Delta$$K_{eff}$/E and when the modified da/dN.$\sqrt{\varepsilon}_f$ was evaluated by $\Delta$$K_{eff}$/E. On the other hand, da/dN could be evaluated uniquely by effective new parameter, $\Delta$K$_{eff}$/$sigma_{ys}$, regardless of anisotropy, as int he following equation da/dN=C''[\frac{{\Delta}K_{eff}}{{\sigma}_{ys}}]^{n''}. And effective stress intensity factor range ratio, U was estimated by the following equation with respect to the ratio of reversed plastic zone size, $\Delta r_{p}$ to monotonic plastic zone size, $r_p$ regardless of stress ratio and anisotropy. U=-4.45$(\Delta r_{p}/r_{p})^{2}$+4.1$(\Delta r_{p}/r_{p})$+0.245_{p})$+0.245

• 한국광학회지
• /
• 제23권6호
• /
• pp.274-280
• /
• 2012

기존의 반사형 타원계에 광분할기와 프리즘 등의 광학소자를 추가하여 $8.0{\mu}m$ 보다 작은 면적에서 시료의 광학이방성을 측정할 수 있는 수직반사형 타원계를 제작하였다. 수직반사 구조를 구현하기 위해 사용된 광학소자들의 편광작용을 보정하여 광학이방성 측정의 정확도를 향상시켰다. 비편광 광분할기를 사용하고 사분파장 위상지연자를 장착하며 광섬유를 제거하고 파장영역을 최적화하여 광학이방성인자 측정값의 표준편차를 0.00083 으로 줄이고 방위각 변화에 따른 rutile 시료의 광학이방성인자의 변동폭을 0.015 이하로 줄일 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제27권7호
• /
• pp.428-432
• /
• 2014

The Hall factor in a two-dimensional device with indirect conduction valleys is calculated for several growth on various strain conditions. In the [001] or [111] growth direction, the two-dimensional constant energy surfaces of occupied valleys are shown to be isotropically distributed. However, in the [110] growth direction, the distribution of occupied valleys on the plane is not isotropic. This fact is the reason for the anisotropic Hall factor on the sample plane.

• Elastomers and Composites
• /
• 제36권1호
• /
• pp.30-36
• /
• 2001

이 연구의 목적은 카본블랙이 충전된 천연고무에서 비 등방성 발생에 영향을 주는 인자를 조사하기 위함이다. 고분자 사슬의 방향성은 인장특성에 영향을 준다. Pre-strained 방향의 parallel 시편은 등방성 혹은 perpendicular 시편에 비하여 낮은 인장영역에서 낮은 강도를 보이지만 높은 신장영역에서 높은 강도를 보인다. 고 인장 영역에서 parallel한 천연고무 시편은 비결정성인 SBR에 비하여 높은 강도를 보여주고 있다. 이것은 parallel 시편의 방향성에 영향을 받는 것으로, 시편의 방향성은 2차 인장시 결정화를 위한 핵으로 작용하여 결정화도를 증가시키는 것으로 보인다.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.42-48
• /
• 1991

대표적인 철계비정질 합금인 $Fe_{80}B_{15}Si_{5}$의 기초연자기특성을 펄스법으로 측정하였다. 자기변형, 이방성에너지, 자화율의 역수들 사이의 정량적 관계를 연구하였다. 자기변형과 일축이방성에너지의 자화율의 역수에 대한 상대적인 기여도를 계산하였다. 내부응력의 크기와 듀도이방성에너지를 추산하였다. 시료의 장축방향으로 인가된 장력은 유도 이방성에너지를 크게 증가하게 함을 알았다.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.261-269
• /
• 1998

스퍼터링 중 500~600 Oe의 자기장을 인가한 상태에서 제조된 비정징 Sm-Fe 합금 박막에서 6$\times$104 J/m3 크기의 유도자기이방성이 형성되었다. 자장 증착에 이해유도자기이방성이 형성된 합금 박막은 이방성이 형성되지 않은 합금 박막에 비해 자구 구조에 무관한 "포화" 자기변형은 유사하지만, 측정 방향에 따른 자기변형의 이방성 비는 최대 35 정도로서 매우 크게 증가하였다. 이는 자기변형 박막의 디바이스 응용시 성능을 크게 향상시키므로, 실용적인 측면에서 매우 중요하다. 스퍼터링 중 자기장을 인가하지 않고 통상의 마그네트론 스퍼터링에 의해 제조된 비정질 Sm-Fe 합금 박막을 넓은 조성 범위에 걸쳐서 체계적으로 소자한 결과, 이러한 합금 박막에서도 미약하나마 스퍼터링 중의 누설 자계에 의해 증착 도중 유도자기이방성이 형성되는 것을 관찰하였으며, 최대의 유도자기이방성은 Sm 함량 25~30 원자%에서 얻어졌다. 또한 본 합금 박막의 유도자기이방성은 자장 중 열처리에 의해서도 형성되는 것을 관찰하였는데, 형성된 이방성의 크기는 자장 증착에 의해 제조된 시료보다 매우 작게 나타났다. 이는 자장 증착의 경우 원자의 표면 확산을 통한 원자의 이동에 의해 유도자기이방성이 형성되나, 증착 후 자장 열처리에 의한 경우는 체적 확산에 의해 유도자기이방성이 형성되기 때문으로 생각된다.때문으로 생각된다.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.124-132
• /
• 1993

In order to examine the effect of anisotropy and stress ratio on fatigue crack propagation rate and opening-closing behavior and also arrest behavior by single tension peak overload, the fatigue tests of constant amplitude atress and single tension peak overload adding to cycle of constant amplitude were carried out in stress ratio of -0.4, -0.2, and 0.4 with materials of T-L and L-T directions in 2024-T3 aluminum alloy plate. Crack opening-closing begavior were measured by the compliance method using COD gage and strain gage. In case of the crack opening-closing behavior was measured by strain gage, the effect of stress ratio is unchangeable. But in the case of COD gage, that is remarkably decreased. Fictitious effective stress intensity factor(U sub(f)) and effective stress intensity factor ratio(U) in L-T direction was higher than those in T-L direction and also threshold arrest overload ratio incrased as stress ratio decreased and that of T-L direction was higher than that in L-T direction.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.149-163
• /
• 2023

This paper presents stability evaluation of unlined tunnels with semi-circular arch and straight sides (SASS) driven in non-homogeneous and anisotropic undrained clay. Numerical analysis has been conducted based on lower bound finite element limit analysis with second order cone programming under plane strain condition. The solutions will be used for the assessment of stability of unlined semi-circular arch tunnels and tunnels in which semi-circular roof is supported over rectangular/square sections. The stability charts have been generated in terms of a non-dimensional factor considering linear variation in undrained anisotropic strength for normally consolidated and lightly over consolidated clay with depth, and constant undrained anisotropic strength for heavily over-consolidated clay across the depth. The effect of normalized surcharge pressure on ground surface, non-homogeneity and anisotropy of clay, tunnel cover to width ratio and height to width ratio of tunnel on the stability factor and associated zone of shear failure at yielding have been examined and discussed. The geometry of tunnel in terms of shape and size, and non-homogeneity and anisotropy in undrained strength of clay has been observed to influence significantly the stability of unlined SASS tunnels.