• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1143-1156
• /
• 2017

This paper describes recent development activities of the GENESIS code, which is a transport code for heterogeneous three-dimensional geometry, focusing on applications to reactor core analysis. For the treatment of anisotropic scattering, the concept of the simplified Pn method is introduced in order to reduce storage of flux moments. The accuracy of the present method is verified through a benchmark problem. Next, the iteration stability of the GENESIS code for the highly voided condition, which would appear in a severe accident (e.g., design extension) conditions, is discussed. The efficiencies of the coarse mesh finite difference and generalized coarse mesh rebalance acceleration methods are verified with various stabilization techniques. Use of the effective diffusion coefficient and the artificial grid diffusion coefficients are found to be effective to stabilize the acceleration calculation in highly voided conditions.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.247-256
• /
• 2003

국내 서해안 지역에서는 실트질 저소성 점토가 두루 분포하고 있다. 따라서, 저소성 점토를 함유한 연약지반에 지반개량공법에 관련된 여러 해석을 실시할 경우, 일반적으로 수정 Cam-clay모델을 적용하여 FEM 해석을 수행하고 있다. 하지만, 국내에서는 등방조건에서 개발된 Cam-clay이론의 특성에 대해서 충분한 검토를 하지 않고 비등방 조건을 갖는 현장을 해석하기 위해 두루 적용하고 있다. 따라서, 본 논문은 실트질 저소성 점토지반에서 수정 Cam-clay 이론을 적용할 경우, 발생되는 문제점들을 고려하기 위해 실내 등방 및 비등방 삼축압축시험을 실시하였으며, 그 결과를 FEM 수치해석을 구성하여 시험결과와 비교ㆍ검토하였다. 검토결과 수정 Cam-clay 이론을 적용한 해석치들은 비배수 전단강도를 평가함에 합리적인 결과를 나타냈지만, 하중적용시 발생하는 간극수압을 예측함에 모두 과대 평가를 나타냈다. 특히 비등방 조건에서는 등방조건보다 더욱 큰 차이를 보였다. 이러한 원인은 수정 Cam-clay 이론 자체가 등방조건의 이론인 관계로 등방조건보다 비등방조건에서 과잉간극수압 예측이 과대 평가되는 특징을 보인다고 판단할 수 있다. 또한, 등방조건에서 약간 과대 평가되는 이유는 실트질 저소성 점토가 전단시 시료 팽창에 의한 다일러턴시가 발생하여 간극수압 예측에 전반적인 과대 평가를 유발했음이라 판단된다.

• 대한기계학회논문집
• /
• 제7권1호
• /
• pp.64-72
• /
• 1983

A method of numerical analysis is proposed for the pure stretch forming of A1 sheet by hemi-spherical punch. The analysis is performed by Woo's general method under the condition of variable friction and plastic yielding is based on the new anisotropic yield function proposed by Hill. A comparison of the calculated results with experiment shows good agreement for various lubrication when the initial values of the coefficient of coulomb friction at pole are less than 0.4.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.25-32
• /
• 2005

일반적으로 압밀계수는 일차원 압밀이론에 근거한 표준압밀시험을 이용하여 평가된다 하지만 실제 현장에서는 압밀 중 3차원적으로 응력 및 변형이 발생하게 된다. 본 연구에서는 실제 현장에서 발생 가능한 다양한 응력-변형 조건을 고려한 새로운 압밀계수 평가방법을 제안하였다. 제안된 방법에 의한 과잉간극수압 소산양상 예측 결과는 실측치와 매우 잘 일치하였으며, 따라서 본 연구에서 제안된 방법을 이용하는 경우 지반의 압밀 속도를 보다 정확하게 예측할 수 있을 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.794-797
• /
• 2002

Piezoelectric properties of PZT-PSN ceramics were investigated as a function of WO$_3$ addition from 0 wt% to 6.0 wt%. The dielectric and piezoelectric characteristics of PZT-PSN ceramics have been investigated at different calcination (80$0^{\circ}C$~90$0^{\circ}C$) and sintering (110$0^{\circ}C$~130$0^{\circ}C$) temperatures. The grain size was increased with the addition of WO$_3$and the sintering temperatures. Anisotropic properties of electromechanical coupling coefficient and piezoelectric coefficient are proven to be dependent on processing temperatures and amount of addition. At the specimen with 0.6 wt% WO$_3$ addition, using calcination temperature of 80$0^{\circ}C$ and sintering temperature of 110$0^{\circ}C$ , mechanical quality factor(Q$_{m}$) and electromechanical coupling coefficient(k$_{p}$) showed the excellent results of 1560 and 0.48, respectively Experimental results indicated that the PZT-PSN system ceramics with WO$_3$impurity could be effectively used for the microtransformer and actuator applications, etc.etc.

• Coupled systems mechanics
• /
• 제6권3호
• /
• pp.317-333
• /
• 2017

The present paper is concerned with the investigation of Rayleigh waves in a homogeneous transversely isotropic magnetothermoelastic medium with two temperature, in the presence of Hall current and rotation. The formulation is applied to the thermoelasticity theories developed by Green-Naghdi theories of Type-II and Type-III. Secular equations are derived mathematically at the stress free and thermally insulated boundaries. The values of Determinant of secular equations, phase velocity and Attenuation coefficient with respect to wave number are computed numerically. Cobalt material has been chosen for transversely isotropic medium and magnesium material is chosen for isotropic solid. The effects of rotation, magnetic field and phase velocity on the resulting quantities and on particular case of isotropic solid are depicted graphically. Some special cases are also deduced from the present investigation.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.563-570
• /
• 1990

A silicon pressure sensor made of a full bridge of diffused resistors was designed and fabricated using semiconductor integrated circuit process. Thin diaphragms with 30\ulcorner thickness were obtained using anisotropic wet chemical etching technique. Our device showed strong temperature dependence. Compensation networks are used to compensate for the temperature dependence of the pressure sensor. The bridge supply voltage having positive temperature coefficient by compensation networks was utilized against the negative temperature coefficient of bridge output voltage. The sensitivity fluctuation of pressure sensor before temperature compensation was -1700 ppm/\ulcorner, while it reduced to -710ppm\ulcorner with temperature compensation. Our result shows that the we could develop accurate and reliable pressure sensor over a wide temperature range(-20\ulcorner~50\ulcorner).

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1408-1414
• /
• 2004

The use of flip-chip technology has many advantages over other approaches for high-density electronic packaging. ACF (anisotropic conductive film) is one of the major flip-chip technologies, which has short chip-to-chip interconnection length, high productivity, and miniaturization of package. In this study, thermal fatigue lift of ACF bonding flip-chip package has been predicted. Elastic and thermal properties of ACF were measured by using DMA and TMA. Temperature dependent nonlinear hi-thermal analysis was conducted and the result was compared with Moire interferometer experiment. Calculated displacement field was well matched with experimental result. Thermal fatigue analysis was also conducted. The maximum shear strain occurs at the outmost located bump. Shear stress-strain curve was obtained to calculate fatigue life. Fatigue model for electronic adhesives was used to predict thermal fatigue life of ACF bonding flip-chip packaging. DOE (Design of Experiment) technique was used to find important design factors. The results show that PCB CTE (Coefficient of Thermal Expansion) and elastic modulus of ACF material are important material parameters. And as important design parameters, chip width, bump pitch and bump width were chose. 2$^{nd}$ DOE was conducted to obtain RSM equation far the choose 3 design parameter. The coefficient of determination ($R^2$) for the calculated RSM equation is 0.99934. Optimum design is conducted using the RSM equation. MMFD (Modified Method for feasible Direction) algorithm is used to optimum design. The optimum value for chip width, bump pitch and bump width were 7.87mm, 430$\mu$m, and 78$\mu$m, respectively. Approximately, 1400 cycles have been expected under optimum conditions. Reliability analysis was conducted to find out guideline for control range of design parameter. Sigma value was calculated with changing standard deviation of design variable. To acquire 6 sigma level thermal fatigue reliability, the Std. Deviation of design parameter should be controlled within 3% of average value.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.313-322
• /
• 2018

The present study is dedicated to investigate the SH body-as well as Love-waves propagation effects in porous media with uncertain porosity and permeability. A unified formulation of the governing equations for one-dimensional (1-D) wave propagation in anisotropic porous layered media is presented deterministically. The uncertainties around the above two cited parameters are taken into account by random fields with the help of Monte Carlo Simulations (MCS). Random samples of the porosity and the permeability are generated according to the normal and lognormal distribution functions, respectively, with a mean value and a coefficient of variation for each one of the two parameters. After performing several thousands of samples, the mathematical expectation (mean) of the solution of the wave propagation equations in terms of amplification functions for SH waves and in terms of dispersion equation for Love-waves are obtained. The limits of the Love wave velocity in a porous soil layer overlaying a homogeneous half-space are obtained where it is found that random variations of porosity change the zeros of the wave equation. Also, the increase of uncertainties in the porosity (high coefficient of variation) decreases the mean amplification function amplitudes and shifts the fundamental frequencies. However, no effects are observed on both Love wave dispersion and amplification function for random variations of permeability. Lastly, the present approach is applied to a case study in the Adapazari town basin so that to estimate ground motion accelerations lacked in the fast-growing during the main shock of the damaging 1999 Kocaeli earthquake.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.104-111
• /
• 2013

균열을 가진 콘크리트에서는 균열폭으로 유입되는 염화물 이온에 의해 열화가 가속화된다. 본 연구는 균열을 가진 콘크리트의 염화물 확산에 대한 모델링으로, 정상상태를 가정하여 1차원 (이방성) 및 2차원 (등방성) 균열 모델링을 수행하였다. 기존의 균열 모델링에서는 직사각형 균열패턴으로 모델링을 수행하였으나, 본 연구에서는 조도를 가진 쐐기형 형태로 균열을 모델링하였다. 검증을 위하여 1차원 유입에 대해서는 콘크리트 시편에 균열을 유입하여 염화물 영동실험을 수행하였으며, 2차원 유입에 대해서는 기존의 실험결과를 이용하여 검증을 수행하였다. 모든 경우에서 균열형태를 쐐기형으로 고려하여 염화물 확산성이 감소되었으며, 조도를 고려함으로서 합리적인 결과가 도출되었다. 특히 0.10~0.15의 조도계수를 고려할 때, 실험값에 가장 근접한 결과를 나타내었다.