• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.384-395
• /
• 2018

This study was conducted to investigate the distribution and variation of the anion and cation number of aerosols in the A and B regions of Gyorae forests. Ions were measured using an ion number meter between 28 June and 13 July 2017. The total average number of anions and cations were $735ions/cm^3$ and $459.27ions/cm^3$, respectively, which were measured at five sites in A area at average temperature of $27.81^{\circ}C$, wind speed of 0.28 m/sec, and altitude of 455.7 m. The average number of anions and cations were $780ions/cm^3$ and $379.55ions/cm^3$, respectively, which were measured at all four sites in the B region at average temperature of $27.6^{\circ}C$, humidity of 80%, wind speed of 0.1 m/sec and altitude of 477 m. The number of anions and cations in the A and B regions was $757.5ions/cm^3$ and $419.41ions/cm^3$, respectively. The number of ions was highly variable for each measurement over time. The number of anions remained $275.73ions/cm^3$ higher than that of cations. The variance of the measured values of anions and cations between and within sites A and B was significant (p<.001) and there was a significant positive correlation between regional mean values of anions and cations. In conclusion, the temporal distribution and variation of the ion content in the Gyorae forests provide basic information regarding aerosol compositions and changes.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2565-2566
• /
• 2013

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.559-560
• /
• 1985

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.570-572
• /
• 1990

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.624-629
• /
• 2010

The synthesis and evaluation of a novel calix[4]arene-based fluorescent chemosensor 1 for the detection of I. is described. The fluorescent changes observed upon addition of various anions show that 1 is selective for I. over other anions. Addition of I. results in ratiometric measurements with 1 : 1 complex ratio.

• Journal of Photoscience
• /
• v.10 no.2
• /
• pp.209-214
• /
• 2003

A series of coupled-hemicyanine dyes with alkylene spacer were successfully synthesized by a reaction of coupled aldehydes with corresponding salts, respectively. These coupled dyes had more excellent thermal properties (high decomposition temperature, stiff decomposition behavior) and higher molar absorption properties than an uncoupled dye. The coupled dyes with perchlorate anions showed the strongest exothermic decomposition while those with hexafluorophosphorate anions showed endothermic decomposition. As the coupling length (n=3, 4, 5, 6) increased, thermal properties decreased and dyes with even spacer was more thermally stable than dyes with odd spacer. Among several coupled dyes, C4-NP-ClO4 and C4-Cl-ClO4 exhibited the best recording properties with the lowest jitter value of 7.5∼9.5% in authoring disc.

• Journal of Korean Society for Atmospheric Environment
• /
• v.5 no.2
• /
• pp.1-11
• /
• 1989

Sandy dust phenomena was observed from April 19 to 23, 1988 in Seoul. During this period it rained and the precipitation was collected to investigate the rain chemistry. This study was carried out to analyzed the chemical composition of precipitation by the measurements of conditivity, cations $(H^+, NH_4^+, K^+, Na^+, Ca^{2+}, MG^{2+})$, and anions $(SO_4^{2-}, NO_3^-, Cl^-, F^-, Br^-)$ which are believed to be the major ions playing an important role in the acidity of rain water. During the period of sandy dust phenomena the range of pH value and conductivity concentration of rainwater were 6.0-6.7, 172-254 $\mu \mho/cm$. The anions and cations concentrations increased and the orders of these concentrations were $SO_4^{2-} > Cl^- > NO_3^- > Na^+ > Ca^{2+} > NH_4^+ > Mg^{2+}$. THe principal chemical compounds of rainwater were estimated at $(NH_4)_2 SO_4, CaSO_4, NaCl, and MgCl_2$.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.271-279
• /
• 1987

A nitrate ion-selective PVC membrane electrode based on ammonia modified bakelite A-Ni$(NO_3)_2$ complex as ion exchanger was prepared. The electrode gave a linear response with a Nernstian slope of 60mV per decade within the concentration range $1{\sim}10^{-4}$ M $KNO_3$ but nonresponse to hydrogen ion and multivalent anions. The selectivity, response time and life time of the electrode were investigated and it was found that the electrode exhibited good selectivity for four univalent anions ($Cl^-,\;Br^-,\;I^-,\;{ClO_4}^-$). Analytical application to the determination of nitrate were also studied.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.253-260
• /
• 2015

The pitting behaviours of 304L and 316L stainless steels were investigated at $3^{\circ}C$ to $90^{\circ}C$ in 1 M solutions of NaCl, NaBr and NaI by potentiodynamic polarization. The temperature dependences of the pitting potential varied according to the anion, being near linear in bromide but exponential in chloride. As a result, at low temperatures grades 304L and 316L steel are most susceptible to pitting by bromide ions, while at high temperatures both stainless steels were more susceptible to pitting by small chloride anions than the larger bromide and iodide. Thus, increasing temperature appears to favour attack by smaller anions. This paper will attempt to rationalise both of the above findings in terms of the point defect model. Initial findings are that qualitatively this approach can be reasonably successful, but not at the quantitative level, possibly due to insufficient data on the mechanical properties of thin passive films.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.452-457
• /
• 1988

Capacity factors (k') of some inorganic anions including $BF_4^{-1}$ were measured on cetylpyridinium coated column, and with dynamic system using tetrabutylammonium salicylate on PRP-1 reversed-phase column, respectively. After optimum separation condition was obtained this method was applied to the determination of boron in some different type samples.