• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.83-86
• /
• 2004

In this paper, the performance of wideband CDMA system with smart antenna is analyzed for different bandwidth(1.25MHz, 2.5MHz, 5MHz) and angular spread at base station. In detail, the spatio-temporal wideband multipath vector channel model is proposed. And the received signals in 2D-RAKE receiver are rigorously analyzed in proposed vector channel model. We consider the effect of correlation between any two elements of antenna array. Several multipahts within one chip are distinguished into each one and the strongest signal is selected as a desired one. As a result, the performance of W-CDMA system with smart antenna in spatio-temporal wideband vector channel has been improved in proportion to the increase of angular spread and bandwidth.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.103-107
• /
• 2006

At present, most efforts tend to develop a INS which is only based linear accelerometers, because of the low cost micro-machining gyroscopes lack of the accuracy needed for precise navigation application and possible achieving the required levels of precise for micro-machining accelerometer. Although it was known in theory that a minimum of six accelerometers are required for a complete description of a rigid body motion, and any configuration of six accelerometers (except for a "measure zero " set of six-accelerometer schemes) will work. Studies on the feasible configuration of GF-INS indicate that the errors of angular velocity resolved from the six accelerometers scheme are diverged with time or have multi solutions. The angular velocity errors are induced by the biases together with the position vectors of the accelerometers, therefore, in order to treat with the problem just mentioned, researchers have been doing many efforts, such as the extra three accelerometers or the magnetometers may be taken as the reference information, the extended Kalman filter (EKF) involved to make the angular velocity errors bound and be estimated, and so on. In this paper, the typical configurations of GF-INS are introduced; for each type GF-INS described, the solutions to the angular velocity and the specific force are derived and the characteristic is indicated; one of the corresponding extend Kalman filters are introduced to estimate the angular errors; parts of the simulation results are presented to verify the validity of the equations of angular velocity and specific force and the performance of extend Kalman filter.

• 한국통신학회논문지
• /
• 제8권4호
• /
• pp.164-171
• /
• 1983

본 논문에서는 비교적 짧은 계단형 멀티모우드 광섬유를 이용하여 여러 정보의 채널을 전송하는 광멀티플렉싱 기술인 각도분할방식(ADM: Angular Division Multiplexing)에 대해 논하였다. 평면파 입력에 대한 광섬유 내의 모우드 결합과 출력 파워 분포가 계산되었으며 시스템의 혼신도 결정이 제시되었다. 모우드 결합 하에서 광섬유의 길이와 입력조건에 따른 펄스폭이 평면 도파판과 광섬유에 대해 비교, 계산되었다. NA(Numerical Aperture)아래의 입력각에 대한 각도폭은 입력각이 클수록 줄어들었으며 출력은 입력각에 파워가 집중된 환형으로 나타났으며 이는 ADM시스템의 중요한 요인이 되었다.

• 한국통신학회논문지
• /
• 제38B권3호
• /
• pp.216-221
• /
• 2013

본 논문에서는 massive MIMO(Multiple-Input Multiple-Output) 시스템의 채널 특성 분석을 위해, 3차원 레이트레이싱 기반 무선 채널 시뮬레이터인 Wireless Insite를 이용하여, 마이크로셀 환경에서 수평으로 선형 배열된 4개와 128개의 이중 편파 안테나 (dual polarized antenna)로 구성된 송신 배열 안테나 시스템의 각도 확산(angular spread), 교차 편파 식별도(cross polarization discrimination, XPD), 그리고 지연 확산(delay spread) 특성을 비교 분석하였다. 시뮬레이션 및 분석을 통해 128개의 안테나 원소로 구성된 massive MIMO 시스템의 각도확산과 지연 확산은 4개의 안테나 원소로 구성된 MIMO 시스템 보다 작아지고 교차 편파 식별도는 커진다는 것을 확인하였다.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1959-1965
• /
• 2011

Measuring the movement of joint angle of human body is very important clinically. Human joint angle displacement can be used to evaluate the degree of disease and disability. Also, we can determine the rehabilitation process with angular information. Conventional methods for measuring angular displacement are many weakness. The purpose of this study is to overcome the limitations of existing equipments by using optical method. For this reason, optical sensor system was used to correlate detected light signal with joint angle. Experimental results of the applied joint model in this study showed that joint angular displacement can be measured by optical signals. The suggested method is simple, durable, small, lightweight, convenient, and cost effective.

• 천문학회보
• /
• 제35권1호
• /
• pp.81.2-81.2
• /
• 2010

The origin of galactic angular momentum is commonly explained as a result of tidal torques of neighbouring protogalaxies on the forming galactic halo. In this context, the environment plays a preponderant role establishing the total angular momentum of present day galaxies. For the last four decades, most of the observational studies focused their attention on the spatial orientation of galaxies in filaments, groups or clusters, leaving behind the magnitude of the angular momentum. We have implemented a simple model to account for the spin of disk galaxies that allow us to obtain an estimate for any galaxy requiring a minimum of information. Applying this method to a sample of galaxies extracted from the Sloan Digital Sky Survey, we have been studying angular momentum distributions of galaxies in different environments. In this talk I will present some results for galaxies immersed in different environments, spanning three orders of magnitude in environmental density, galaxies having nearby companions and clustered galaxies.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.34-44
• /
• 1994

In this paper, an iterative inversion method in angular spectral domain is presented for microwave imaging of a perfectly conducting cylinder. Angular spectra are calculated from measured far-field scattered fields. And then both the propagating modes and the evanescent modes are defined. The center and initial shape of an unknown conductor may be obtained by the characteristics of angular spectra and the total scattering cross section (TSCS). Finally, the orignal shape is reconstructed by the modified Newton algorithm. By using well estimated initial shape the local minima can be avoided, which might appear when the nonlinear equation is solved with Newton algorithm. It is shown to be robust to noise in scattered fields via numerical examples by keeping only the propagating modes and filtering out the evanescent modes.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1668-1676
• /
• 1996

This paper presents the evaluation of an angular spectrum-based method used to calculate scattering pattern of a three-dimensional object modelled as a collection composed of vertical sectional two-dimensional images. This is done via comparing a proposed method with two existing methods, i.e., a Fresnel hologram method and a ray-tracing method, in terms of computatioal complexities and reconstructed results. Maathematical derivations for each methods are reviewed and implementing procedures are described in detail, along with the amount of computaions required from the implementation point of view, rather than from the mathematical point of view. We show simulation results in which the Fresnel holoram method dose not exhibit promising results although it requires the least computation. Moreover, it is also shown that the proposed method, even with much less computational requirement than the ray-tracing method, produces good performances asmuch as the ray-tracing method does.

• ETRI Journal
• /
• 제41권1호
• /
• pp.52-60
• /
• 2019

A fast hologram calculation approach is proposed to reduce computational load by avoiding the recalculation of redundancy information. In the proposed method, the hologram is divided into several sub-holograms that record and reconstruct different views of 3D objects. The sub-hologram is generated from its adjacent calculated sub-holograms by only adding the holograms of difference images between an adjacent pair of views. The repetitive information of two adjacent views is called angular redundancy. Therefore, avoiding the recalculation of this angular redundancy can considerably reduce the computational load. Experimental results confirm that the proposed method can reduce the computational time for the statue head, rabbits, and car to 4.73%, 6.67%, and 10.4%, respectively, for uniform intensity, and to 56.34%, 57.9%, and 66.24%, respectively, for 256 levels intensity, when compared to conventional methods.

• 대한전자공학회논문지SD
• /
• 제38권9호
• /
• pp.634-642
• /
• 2001

Buried channel 도파로와 ridge 도파로에 대하여 variational method (VM)과 유효굴절율 방법을 사용하여 2차원의 필드 분포를 구한 뒤 angular spectrum 방법을 적용하여 여러 개의 도파로 두께에 대하여 도파로 폭에 따른 단면 반사율을 계산하고 이를 비교 검토하였다. 도파로 폭에 따른 단면 반사율 변화량은 buried channel 도파로의 경우는 매우 크게 나타났으나 ridge 도파로의 경우는 buried channel 도파로의 변화량에 비해 매우 작게 나타났다. Angular spectrum 방법을 사용하여 채널 도파로 소자의 단면 반사율을 계산할 때 사용되는 2차원의 필드 분포의 정확성은 반사율 값에 큰 영향을 미침을 알 수 있었다. 유효굴절율 방법의 경우 도파로 폭과 도파로 두께가 감소할수록 필드 분포의 부정확성으로 인해 정확한 반사율 값과의 오차가 심하게 나타났다. 반면에 VM을 사용하여 구한 필드 분포는 도파로 폭과 두께에 관계없이 정확한 필드 분포와 오차가 적어 유효굴절율 방법보다 정확한 반사율 값을 구할 수 있었다. 유효굴절율 방법이 잘 적용되는 영역에서는 두 방법을 사용하여 구한 반사율의 차이가 매우 작음을 알 수 있었다.