• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.133-145
• /
• 2007

The purpose of this paper was to compare of difference between energy walking and normal walking. Subjects were selected 8 male undergraduates. The kinematic variables of a pelvis and a thorax were analysed at the take off and contact with 3d cinematography. In addition to the variables, the phase plot angle was calculated in order to definite characteristics in the phase space. The pelvic angle and angular velocity showed significant differences in the flexion/extension between two walking patterns. The pelvic angle and angular velocity were increasing when walking speed was increasing and magnitude of the variables of energy walking was larger than corresponding values for normal walking. On the other hand, the thoracic angle demonstrated significant differences in the flexion/extension and rotation between two walking patterns. The angles of energy walking were smaller in the flexion/extension and were larger in the rotation than the angle of normal walking. The kinematic characteristics of energy walking were also showed clearly significant differences in the range of motion and the relative angle of the trunk. The angle of phase plot only showed demonstrated a significant difference in the rotation at contact between the two walking patterns.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.4
• /
• pp.2203-2211
• /
• 2020

Background: Backpacks are one of the most widely used accessories in modern society. However, previous studies have shown that carrying a backpack can cause various musculoskeletal problems. Objectives: To investigate the effects of a body-adhesive backpack on craniovertebral angle, sagittal shoulder angle and the muscle fatigue in the upper extremity. Design: Randomized cross-over design. Methods: For this study, 36 healthy university students participated in this study. The experiment was conducted three times using common backpack, and body-adhesive backpack condition. The angles of the cervical spine and shoulder joints of the subjects were calculated without the backpack. Electrodes were placed at upper trapezius, lower trapezius, rectus abdominis and erector spinae to check for muscle fatigue. Subjects carried a backpack and walked on a treadmill for 15 minutes at 4 km/h. The muscle fatigue signal was also measured while walking. After walking, the craniovertebral and sagittal shoulder angles were measured again while subjects carried backpack. Results: As a result of this study, body-adhesive backpack condition showed significant decrease and significant increase in craniovertebral angle and sagittal shoulder angle than common backpack (P<.05). Body-adhesive backpack condition showed significant decrease in upper trapezius, lower trapezius, erector spinae, and rectus abdominis when compared to a common backpack (P<.05). Conclusion: This study suggests that a body-adhesive backpack is more beneficial in correcting body posture than a common backpack.

• Journal of computational fluids engineering
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

For Aerodynamic analysis of vehicle at altitude, 100km, the validity of governing equations based on continuum model, was reviewed. Also, as the preliminary study for the sub-orbital space plane development, a candidate geometry was suggested and computational fluid dynamic(CFD) analysis was performed for various angles of attack in subsonic and supersonic flow regimes to analyze the aerodynamic characteristics and performance. The inviscid flow analyses showed that the stall starts at angle of attack above $20^{\circ}$, the maximum drag is generated at angle of attack, $87^{\circ}$ and the maximum lift to drag ratio is about 8 in subsonic flow. In supersonic, the stall angle is about $40^{\circ}$ and the maximum drag is generated at angle of attack, $90^{\circ}$. Also, mach number distribution of re-entry vehicle was computed versus altitudes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.6
• /
• pp.407-420
• /
• 2003

Purpose : The purpose of this study was to analyse the facial changes and factors contributing to then after bilateral sagittal split ramus osteotomy of mandibular prognathism. Materials and Methods : Forty patients with Class III dental and skeletal malocclusion who were treated with bilateral sagittal split ramus osteotomy were reviewed. Frontal and lateral cephalometric radiographs were taken preoperatively, immediate postoperatively and more than six months postoperatively in each patient. After tracing the cephalometric radiographs, various parameters were measured. Results : 1. Gonial angle at postoperative two days was decreased about $10.4^{\circ}$ than preoperatively and gonial angle at postoperative six months was increased about $6.8^{\circ}$ than postoperative two days. So, gonial angle at postoperative six months was decreased about $3.6^{\circ}$ than preoperative gonial angle. 2. Facial height postoperative two days was decreased about 0.8mm than preoperatively and facial height at postoperative six months was decreased about 0.7mm than postoperative two days. So, facial height at postoperative six months was decreased about 1.5mm than preoperative facial height. 3. Mandibular width postoperative two days was decreased about 1.0mm than preoperatively and mandibular width at postoperative six months was increased about 1.8mm than postoperative two days. So, mandibular width at postoperative six months was decreased about 2.8mm than preoperative mandibular width. 4. Amount of set back and mandibular plane angle were not influencing on relapse degree. Conclusion : It is thought that bilateral sagittal split ramus osteotomy in mandibular prognathic patients is effective to improve long face and steep gonial angle. More prudent operation and careful postoperative management is required to maintain stable face postoperatively. Further research for soft tissue changes and factors which are related with relapse is needed.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.117-124
• /
• 1997

This study was carried out to investigate the growth and branching pattern of stolons at Korean lawn(Zoysia japonica Steud.) in the field condition. The results were summarized as follows ; 1.About 80% of observed lawns had one primary stolon. Among the lawns with several primary stolons, 30% of them had two primary stolons, 63% had three, and 7% had four. 2.The angles between the primary stolon and the shoot were increased from 0˚ to 52˚ according to the node order from the terminal shoot apex, and reached maximum angle at the 7th node. 3.The internode length was the longest in the middle position of stolon, and its growing rate which depends on months was increased from May to September. 4.The branching angles between primary and secondary stolon were from 44˚ to 53˚ in each node. The average left branching angle was about 48.20, right branching angle 47.8˚, and the total average branching angle was 48.00. 5.The rate of initial brabch was the highest at the 10th node in May, the 7th node in July and the 5th node in September. But, the initial branching rate at the 7th node in July was higher than any other that at the 10th node in May and the 5th node in September. 6.The distribution rate of secondary stolon in each node of primary stolon was the highest at the 7th node. 7.when the terminal shoot apex of primary stolon was damaged mechanically, the branching rate at the first node after the damaged region was highly increased to 62%. The results of this study may be suggested that the secondary stolon begins to branch with the angle of 480 from the 7th node of the normal primary stolon, and those may be used as a basic data for the branching simulation in lawn.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.161-168
• /
• 2003

An investigation of the dimensionless torque in the newly developed cone drum twister texturing mechanism is reported. The cone drum twister is one of the outer surface contacting friction-twisting devices in false-twist texturing. In this cone drum twister, a filament yam passes over the surface of the cone drum that rotates by the passing yarn without a special driving device. This research is composed of the theoretical analysis of the false twisting mechanism and the experimental analysis at room temperature. The equations have been derived which shows interrelationship of the conical angle of cone drum, the wrapping angle, the drag angle, and the yam helix angle. Theoretical values of dimensionless torque were calculated and were compared with the experimental results. It is shown that, as the conical angle and the projected wrapping angle increased, the dimensionless torque also increased. But the conical angle was reached to ${30.75}^{\circ}C$, the dimensionless torque decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.207-211
• /
• 2004

We have performed computer simulation to obtain a globa1 optimization of power consumption and viewing angle characteristic of reflective twisted nematic (R-TN) mode liquid crystal display (LCD) with sin81e polarizer and λ/4 plate. Our studies shout that with increasing the twist angle, a steepness of reflectance-voltage curve increase, operation voltages decreases, the region where contrast ratio (CR) greater than 10 increases but the reflectance of the white state starts to decrease at above the twist angle of 75$^{\circ}$. Above the twist angle of 90$^{\circ}$, the R-TN mode LCD shows the most favorable combination of low consumption and good viewing angle characteristic.

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.233-240
• /
• 2000

A commercially available Doppler radar was modified and evaluated for on-board monitoring of ground speed. The radar output was corrected for pitch angle of aircraft based on the output of an electrolytic tilt sensor. The effects of aircraft speed, height and mounting angle on error in the ground speed were evaluated. The speed error decreased with an increase of the mounting angle since the radar contact angle with respect to the ground approached to the mounting angle. The error increased with an increase of the nominal aircraft speed. The altitude insignificantly affected the speed error. The Doppler radar provided acceptable percent errors within 5% in most measurements. The error can be reduced within ${\pm}$1.5% by increasing the mounting angle ($43^{\circ}$). The error of -3.8% at the mounting angle of $29^{\circ}$could be reduced by adjusting the mounting angle with respect to the radar contact angle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.520-527
• /
• 2010

The kill probability of a missile depends on guidance error, warhead performance, and etc. In this paper, we analyzed the kill probability of anti-tank missile in a new approach. Under the condition that the missile hit the target, we studied the effect of angle of attack and impact angle. High impact angle increase the probability that the missile hits the upper armour which is relatively weaker, while high angle of attack at the impact instant decreases the effectiveness of the jet induced by the warhead. We proposed a way to increase the capability of penetration by analyzing the interrelation between impact angle and angle of attack.

• Journal of the Korean Society of Physical Medicine
• /
• v.2 no.1
• /
• pp.49-59
• /
• 2007

Objective : To purpose of this study was the most of the ladies wear high-heeled shoes at lease 4 to 5 day a week but the effect of it's height on the lumbo-sacral legion angle has not been clearly defined. Method : Subject were 20 young ladies, who had majored in physical therapy of the Dae-gu Health College. Method 1. PACS system X-ray was used to measure the lumbo-sacral legion angle under the condition of bare foot, 3cm, 7cm high-heeled at standing position. 2. Spinal Mouse was used to measure the spinal segment motion angle and length under the condition of bare foot, 3cm, 7cm high-heeled at being Flexion-Extension position Result : The result of this study were as follow I. Significant statistical increase in lumbar lordosis was observed as the heel height was increased from bare foot to 7cm high-heeled(p<.05), but there was no significant difference in the lumbo-sacral angle & sacral angle(p>.05). 2. The Height and the weight of the subjects, their preference on the shoes didn't affect the lumbo-sacral lesion angle(p>.05) 3. The variation of the heel height didn't affect the spinal segment motion angle and length(p>.05). Conclusion : There is strong relationship between the high of heel with increasing the lumbar lordosis(p<.05).