• 지역과문화
• /
• v.7 no.4
• /
• pp.21-48
• /
• 2020

The purpose of this study is to analyze how the integrated heritage conservation actually affected the urban economy of historical cities. To this end, this study examined the trends and meanings of an integrated heritage conservation, and a relationship between sustainable urban development and integrated heritage conservation to find out connectivity with urban economy. Before an empirical analysis of domestic policy of integrated conservation of heritage, this study overlooked the system of the preservation and promotion of ancient cities, which can be called integrated heritage conservation system in Korea, and examined how the historic landscape improving project, which is being implemented as part of the policy of the preservation and promotion of ancient cities, actually affected the urban economy. This study empirically identified the impact of the project through a land price analysis of the region. This study focused on analyzing an impact of the project on a price of land in the proximity of subsidized land lot and analyzed the impact through Difference-In-Difference method. In particular, the project effect was analyzed only for the settlement zones among the preservation and promotion zones where the project was carried out, and as a result, it was confirmed that the average price of lands in the proximity of subsidized land increased more over the same period than in the areas where the project was not intensively implemented.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.28-55
• /
• 2010

Currently, the natural monument system of Korea for naming and designation of natural monuments is based on "Chosun Natural Monument Conservation Acts for Treasure, Ancient Landmark, and Natural Beauty" enacted in 1934 during Japanese colonization period. The framework of natural monument system is still in effect, which is pointed out as a problem. The Dangsan forests and Bibo forests are Korean traditional cultural resources representing countryside of Korea. Cultural Heritage Administration follows and relies on the 'Limsu of Chosun' (1938), a report written by a Japanese, for naming and classification of natural monuments. A Dangsan forest at Yesong-ri was named "Yesong-ri evergreen forest" in 1938. They followed the naming system of "evergeen forest" until today. The objective of this study is to review the issues and problems of 'Limsu of Chosun' and natural monument naming system begun during Japanese occupation period, and suggest an alternative to the current situation where naming natural monument accordingly without discretion. Eighteen dangsan forests bibo forests were selected for examination and analysis. The names of the dangsan forests bibo forests were evaluated to find out whether various aspects of the forests are reflected in the name. The study suggests that many forests and old trees designated as natural monument should be named as "~Dangsan forest", "~Dangsan forest Bibo forest", or "~Dangsan tree" with consistency accordingly. The new names will bring a momentum to overcome the limitation of natural monument naming system continued since Japanese occupation period, and also enhance the value of Dangsan forests and Bibo forests as Korean traditional and cultural landscapes.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.508-517
• /
• 2019

This study analyzed on alloys and by-product samples produced through the reproduction experiment of bronze mirror with geometric designs. The alloy ratio used in the first and second reproduction experiments was based on the analysis results of bronze mirror with geometric designs(Cu 61.68%, Sn 32.25%, Pb 5.46%) which is the national treasure No. 141. As a result of portable X-ray fluorescence analysis on the raw materials used in the reproduction experiment, the contents of copper raw materials were 98.85 wt% for Cu, tin raw materials were 99.03 wt% for Sn, and lead raw materials were 70.19 wt% for Pb, and 21.81 wt% for Sn. Sn and Pb were added 5 wt% more considering the evaporation amount of tin and lead during alloy melting. The result produced by the first reproduction experiment were 58.75 wt% for Cu, 36.87 wt% for Sn, 4.39 wt% for Pb, and the other result produced by the second reproduction experiment were 58.66 wt% for Cu, 35.89 wt% for Sn, and 5.50 wt% for Pb. The composition of the components was about 3.00 wt% in Cu and Sn respectively, and the microstructure was similar to the previous studies because the δ phase was observed mainly. The results of this study will be used as basic data for the materialistic characteristics of ancient bronze mirror in the future.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.631-640
• /
• 2019

The purpose of this study was to compare analytical results of sand iron bars reproduced by the traditional iron-making method through a destructive analysis and a non-destructive analysis. For these studies, we produced two types of samples. One was sample(SI-A), a part of the sand iron bar for destructive analysis. The other was SI-B(9 ㎠) for non-destructive analysis. A metallurgical microscope and scanning electron microscope were used for the destructive analysis, and neutron imaging analysis with the Hokkaido University Neutron Source (HUNS) at Hokkaido University, Japan, was used for the non-destructive analysis. The results obtained by destructive analysis showed that there was ferrite and pearlite of fine crystallite size, and some of these showed Widmanstätten ferrite microstructure grown within the pearlite and coarse ferrite at the edge of the specimen. The results from the neutron imaging analysis showed that there was also ferrite and pearlite with 3 ㎛ α-Fe of BCC structure. Based on these results, neutron imaging analysis is capable of identifying material characteristics without destroying the object and obtaining optimal research results when applying it to objects of cultural heritage.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.440-452
• /
• 2019

This research has analyzed SI, the traditional steel, and SIHS(SI + HS), SICS(SI + CS), and SINiS(SI + NiS), the materials that were produced through welding and reprocessing three modern steel- HS, CS, and NiS- that have different carbon content. The purpose of the analyzation was to improve the definition of the multi-layered pattern that appears in the forging process. In observing modified structures on the commissures of three modern steel that have different carbon component to the SI, SINiS produced the most significant multi-layered pattern as well as the excellent welding quality. The excellent welding quality was due to the content of nickel which helped the forge welding process with other materials. There was no significant difference in crystal grain per materials, and SICS showed the highest hardness. At the measurement of EPMA for commissures of the materials, SINiS showed the highest definition of the multi-layered pattern due to the nickel and carbon content. The results above showed that the carbon steel with nickel content is the best material for the most definite multi-layered pattern, expressed from the multi-layered structure which is a characteristic of traditional forge welding technology. It is expected that the result of this research can be utilized as the technical data in further researches regarding the relics excavated from ancient welding process and their multi-layered structure and patterns.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.139-147
• /
• 2013

This study focused on iron making related information through analyzing slags and furnace wall collected from iron production site of Suryong-ri Wonmorongi, Chungju. Total Fe content of slags were from 36.98% to 44.47% and this range was general recovery rate of iron in ancient. Compounds of calcium included slags was supposed to add intentionally during smelting process as deoxidation agent in order that these helped to separate iron from impurities. Furnace wall didn't make of high alumina clay because of low $Al_2O_3$. Microstructure and main components of slags show that No. 1 to 3 slags with fayalite and wustite were products of iron ore smelting. However, No.4 slag is more likely to smelt by iron sand because of ulvospinel with $TiO_2$ in No. 4 slag. Therefore, iron ore were not only used but iron sand in smelting and furnace wall made of general clay with low $Al_2O_3$ content in this area.

• Journal of Conservation Science
• /
• v.29 no.4
• /
• pp.437-444
• /
• 2013

We studied for the chemical characterizations of the charred residues obtained from the ancient potteries in the Proto-Three Kingdom period from archaeological sites in Joong-do, Chuncheon. Organic components of the charred residues were extracted and analysed using mass spectrometry and infrared spectroscopy. Lipid profiles from these samples were not identified in gas chromatography-mass spectrometry. Bulk stable isotope analyses of charred residues was used to infer an average values of the foods prepared. The average carbon isotope values (${\delta}^{13}C$) of the residues are $-14.7{\pm}2.8$‰ (ranging from -8.7‰ to -18.4‰, n=9), and nitrogen isotope values (${\delta}^{15}N$) are $6.2{\pm}1.1$‰ (ranging from -4.4‰ to -7.6‰, n=9). This is the first approach to analyse charred residues using stable isotopic method in Korea. Charred food residues on the interior surface of archaeological pottery can provide valuable information about pottery use and dietary habits of its population.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.87-96
• /
• 2018

This study analyzed the influence of folding time on the forge welded bar and hammer scale produced using the traditional refining and forge welding reproduction experiment. In the case of the forge welded bar, increasing the forging time decreased the percentage of impurities and porosity from 26.09% to 1.8%. Additionally, the hardness increased by an average of 36.88 HV. In other words, the microstructure gradually became more precise. For the hammer scale, the amount of T Fe increased with forging time. X-ray diffraction analysis revealed the presence of quartz, fayalite, $w{\ddot{u}stite$, and magnetite. The amount of quartz decreased as the forging time increased. In addition, as the forging time increased, the granular $w{\ddot{u}stite$ changed into a cohesive, long, white band. The results provide information on the characteristics of the forge welded bar and hammer scale produced in the refining and forging process. This information can be used as technical data for ancient steel making processes as well as for future technological systems.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.4
• /
• pp.114-125
• /
• 2016

Lacquer is one of the most widely used natural resin in East Asia since Neolithic Age. As a major ingredient of lacquerware, lacquer is waterproof, insect-proof and rot-proof to be durable and anti-abrasion, generally utilized for mainly painting purpose. According to lacquerware excavated from several sites of Japan and China, lacquerware seems to appear in Neolithic Age. On the other hand in case of excavation research in Korea, lacquerwares are found after the Bronze Age. The initial purpose of lacquer is estimated to be adhesive, regarding the literatures mentioning bitumen(Yeoksceong ), animal glue(Kyeo) and egg alumen(Nanbaek). Especially piece of jar coffin unearthed in Pyeongtaek Daechu-ri site had trace of restoration by lacquer and hemp as an evidence of lacquer for adhesion in Pre-Three Kingdoms period. Since then a trend to restore the broken ceramics with lacquer and decorate with golden foil lasted especially in Joseon Dynasty. In the field of gold plated lacquer method, mother-of-pearl inlaying technique for lacquerware and restoration of buildings, lacquer is still used as adhesive. Due to matter of reversibility lacquer is being avoided for conservation and restoration of cultural heritage. Lacquer as a traditional material for adhesive since ancient times, however, has advantage in adhesion strength and durability. Because synthetic resin adhesive has problem of emission of volatile organic compounds and aging over time, lacquer receives attention recently. On the contrary, by combination adhesive from mixing lacquer and animal glue, already proved the possibility of applicability and chemical modification. A research to utilize lacquer as modern paint or functional material is also conducted continuously also in China and Japan. To put traditional material into practical use and modernize, chemical research from the molecular level of the lacquer is necessary in the near future.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.222-239
• /
• 2019

This paper studied Joseon royal incense, Buyonghyang, focusing on the case of Sunjo Sunwonwanghoo Garyedogam Uigwe. Incense was introduced to Korea in the period of the Three States with Buddhist cultures. Buyonghyang is an incense that represented the royal family and was used in various rituals. Civilians also burned this incense in front of a bride's palanquin at a wedding ceremony. Buyonghyang had various uses-ceremonial uses, as a fragrance, to mothproof, and medical uses. Buyonghyang is a combined incense with ten different ingredients. This study tracked the supply and demand of the incense ingredients through Takjijunjeol, Sejong Shilok Jiriji, and The Annals of the Joseon Dynasty. This paper identified properties of the ingredients and studied recipes using ancient medical books-Jejungshinpyeon, Donguibogam, etc. Then the cooperation and treatment of incense by craftsman were examined using the records of The Annals of the Joseon Dynasty, and Seungjeongwon Ilgi. The significance of Buyonghyang during the Joseon dynasty was studied by examining its use at a royal wedding ceremony. This study considered Sunjo's wedding ceremony based on Sunjo Sunwonwanghoo Garyedogam Uigwe which is highly regarded as a well-organized system compared to other Uigwe. Buronghyang was burned during all of the ceremonies which took place in the palace. Conversely, it is considered that Buyonghyang was burned only during the Bisuchekui ceremony (investiture), which took place in the bride's place, according to the record of the mobilization of court ladies for various incense burners for the Bisuchekui ceremony. Since the incense was able to be used only after Bisuchekui, it is considered that only the royal family could use the incense, and it was a symbolic incense of the Joseon Royal Family.