• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.12-13
• /
• 2019

The bearing capacity of the wall against the eccentric load when the washbasin was attached on the ALC block wall was tested. Test methods are BS EN 14688 and BS 5234-2. Tests in accordance with BS EN 14688 showed that the holding capacity of steel was much stronger and more stable when HA-II (chemical anchor) was used than when the washbasin was fixed using HA-I (plastic anchor). As an experimental result according to the Annex K of BS 5234-2, the bearing capacity of ALC block wall corresponded to the "stage in which the force works(performance grade) 1,500N" for all of the cases where a washbasin is fixed using two types of the wall's dedicated anchors(HA-I and HA-II).

• 한국수산과학회지
• /
• 제36권6호
• /
• pp.743-748
• /
• 2003

An oil boom was set up in order to contain diffused oil from spills and for the retrenchment of damage caused by oil Pollution. Therefore, the oil boom anchor needed proper holding power to endure high resistance from flowing streams and to secure the oil boom around the spill, and must dredge directly into the seabed when it is dropped and block oil outflow immediately. This study investigated the holding power of the danforth anchor and the coastal fishing vessel anchor used for oil booms in the KMPRC (Korea Marine Pollution Response Corporation). For each type, a 30 kg and 20 kg anchor were used. The holding power of the danforth anchors were measured by dropping both weights 10 times. However the coastal fishing vessel anchors were dropped only 5 times each, because no substantial differences were found between drops. In the results of the danforth anchors, an anchor awoke occurred in 2 drops of the 30 kg anchor and in 4 drops of the 20 kg anchor, wherein there was no holding power to be measured. With exception to the anchor awoke cases, the maximum holding power of the danforth 30 kg and 20 kg anchors was 250-520 kg and 123-233 kg, respectively. In the case of the coastal fishing vessel anchors of 30 kg and 20 kg, throughout the experiment, there was no occurrence of an anchor awoke. For the 30 kg and 20 kg anchors, the maximum holding power was measured to be 209-230 kg and 155-170 kg, respectively. Therefore, the holding power of the coastal fishing vessel anchor was shown to be much poorer than that of the danforth anchor. However, the holding power of the danforth anchor was very unstable. Due to the occurrences of anchor awoke, there was no holding power and the measurement value of maximum holding power showed too much variation among the drop tests. Also, after the maximum holding power was achieved, anchor awoke occurred easily. In the case of the coastal fishing vessel anchor was much more stabile, because there was no anchor awoke and no instance where holding power failed. Also the maximum holding power was reached quickly and almost no variation occurred among the drop tests.

• 한국멀티미디어학회논문지
• /
• 제15권7호
• /
• pp.859-869
• /
• 2012

다시점 영상 부호화는 시점 간에 변이 정보를 활용하여 부호화 효율을 향상시키기 위해 개발되었다. 하지만 다시점 영상 부호화는 변이 예측 때문에 높은 계산복잡도를 가진다. 본 논문은 다시점 영상 부호화의 계산 시간을 감소시키기 위한 비기준 화면의 빠른 모드결정 기법을 제안한다. 제안하는 기법은 2단계 과정을 수행한다. 계층적인 B 화면 구조의 기준 화면은 비기준 화면의 예측모드 선택과 높은 상관성을 가진다. 따라서 첫 번째 단계에서, 비기준 화면의 예측모드는 기준 화면의 매크로블록 영역을 이용함으로써 선택된다. 두 번째 단계에서, 우리는 7개 블록 크기의 Inter 예측모드의 참조 방향에서 높은 상관성을 이용하여 Inter 예측모드의 참조방향을 선택한다. 제안하는 기법으로 실험한 결과는 부호화 효율에 큰 손실 없이 부호화 시간에서 평균 약 44% 감소시킬 수 있었다.

• 지질공학
• /
• 제22권1호
• /
• pp.49-58
• /
• 2012

앵커두부에서의 많은 문제점들은 앵커두부가 외부에 노출되어 풍화에 직접적인 영향을 받고, 진동이나 외력에 의해 물리적인 변형과 손상을 많이 받기 때문이다. 본 연구에서는 기존 수압판 방식의 파괴원인을 분석하여 앵커두부에서 발생하는 문제점 해결을 위해 앵커두부의 지표면 근입방식을 제시하였다. 앵커두부처리 방식의 안정성을 기존방식과 비교, 검토하기 위하여 범용해석프로그램인 ABAQUS로 3차원 정밀 수치해석을 수행하여 하중조건에 따른 변위 및 응력분포양상을 분석하였고, 현장 적용성 검증을 위한 시험시공과 계측을 통해 적용 가능성을 평가하였다. 수치해석 결과는 최대수직응력이 9.73 MPa, 수직변위가 1.34 mm로 나타났고, 현장시험을 통하여 콘크리트 수압판의 변위가 근입형 지압판에 비해 3~4배의 큰 변위량을 보인다는 것을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제12권4호
• /
• pp.43-51
• /
• 2011

연약지반에 시공하는 많은 콘크리트전주가 외부하중으로 전도파괴가 발생하는데 본 연구에서는 실물인장실험을 실시하고 근가위치, 근가깊이, 근가개수, 전주근입깊이를 달리하면서 전주에 작용하는 수평토압을 분석하였다. 실물실험은 10가지 종류로 나누어 실험한 결과 수평토압은 전주 근입깊이가 클수록 커지고 하부수동영역이 길어지는 것으로 나타났다. 근가 설치위치가 깊을수록 하부수동영역 토압이 감소된다. 변위는 근가의 위치 및 수량, 전주기초의 근입깊이에 따라 뚜렷한 차이를 나타냈다. 초기하중 재하 시 상부에서 굴절된 양상을 보이다 점증하중에 따라 전주의 중앙부로 굴절의 양상이 전이되었다. 근가위치는 G.L(-) 0.5m인 상태에서 전주기초 깊이 1.3m를 추가로 근입 시 최대 수평변위는 약 1.6배의 감소를 보여 전주의 안정성이 증가하였다.

• 콘크리트학회지
• /
• 제12권5호
• /
• pp.66-73
• /
• 2000

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2018년도 하계학술대회
• /
• pp.175-177
• /
• 2018

This paper proposes an algorithm to speed up block structure partition of quad tree plus binary tree (QTBT) in Joint Exploration Test Model (JEM) encoder. The proposed fast encoding of QTBT block partition employs three spatially neighbor coded blocks, such as left, top-left, and top of current block, to early terminate QTBT block structure pruning. The propose algorithm is organized based on statistical similarity of those spatially neighboring blocks, such as block depths and coded block types, which are coded with overlapped block motion compensation (OBMC) and adaptive multi transform (AMT). The experimental results demonstrate about 30% encoding time reduction with 1.3% BD-rate loss on average compared to the anchor JEM-7.1 software under random access configuration.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.41-57
• /
• 2009

This paper presents the details of a novel external prestressing technique for strengthening of concrete members. In the proposed technique, transfer of external force is in shear mode on the end block thus creating a complex stress distribution and the required transverse prestressing force is lesser compared to conventional techniques. Steel brackets are provided on either side of the end block for transferring external prestressing force and these are connected to the anchor blocks by expansion type anchor bolts. In order to validate the technique, an experimental investigation has been carried out on post-tensioned end blocks. Performance of the end blocks have been studied for design, cracking and ultimate loads. Slip and slope of steel bracket have been recorded at various stages during the experiment. Finite element analysis has been carried out by simulating the test conditions and the responses have been compared. From the analysis, it has been observed that the computed slope and slip of the steel bracket are in good agreement with the corresponding experimental observations. A simplified analytical model has been proposed to compute load-deformation of the loaded steel bracket with respect to the end block. Yield and ultimate loads have been arrived at based on force/moment equilibrium equations at critical sections. Deformation analysis has been carried out based on the assumption that the ratio of axial deformation to vertical deformation of anchor bolt would follow the same ratio at the corresponding forces such as yield and ultimate. It is observed that the computed forces, slip and slopes are in good agreement with the corresponding experimental observations.

• Clinics in Shoulder and Elbow
• /
• 제5권2호
• /
• pp.118-123
• /
• 2002

Purpose: The purpose was to identify the effectiveness of beach-chair position in the arthroscopic Bankart repair over conventional lateral decubitus position with distal traction. Materials & Methods: 36 arthroscopic Bankart repair through July 2000 to July 2001 was done under beach chair position. All cases were shoulder instability. Male patients were 6 and female were 4 with average age of 25 years. Arthroscopic suture anchor was used in 24 cases and average number was 3. Results: Interscalene block was tried in 29 patients and 1 case was changed to general anesthesia. Arthroscopic examination to identify Bankart lesion and associated pathology was done without difficulty Bankart lesions were easily reduced to anatomic position and placed suture anchor and hooking approprately. After the arthroscopic examination,3 cases were converted to open procedure without any positional change. Conclusion: Under interscalene block, the preparation was more simple and the patient could watch arthroscopic procedure with confidence. There was no hindrance in arthroscopic examination and arthroscopic repair could be dont: in more anatomic position. It can be easily changed to open repair if it needed

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.42-49
• /
• 2009

배전용 콘크리트 전주에 작용하는 힘들이 지반의 변위에 미치는 영향을 유한요소법을 이용하여 분석하였다. 지반의 종류, 풍하중, 근가의 위치, 매입길이, 경간의 길이를 변화시키며 단전주와 겹전주의 경우에 지반의 변위를 분석하였다. 근가의 위치는 매입길이의 1/4지점에서 변위가 최소로 나타났다. 지반의 종류는 지반의 강성이 클수록 변위가 작아서 연약한 점토나 느슨한 모래지반 또는 실트 지반은 변위가 크다. 겹전주는 굴착면적이 커서 변위가 다소 큰 것으로 판단되며 시공시에는 콘크리트보강이 필요하다. 지표면에 가까울수록 횡방향 변위는 매입길이비가 작은 전주가 더 크게 나타났다. 횡방향 변위를 줄이기 위해서는 매입길이를 크게 하는 것이 좋다. 경간길이는 횡방향 변위에 영향이 별로 없는 것으로 나타났다.