• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• Journal of Korean Neurosurgical Society
• /
• 제59권3호
• /
• pp.282-286
• /
• 2016

Objective : Obturator neuropathy is a rare condition. Many neurosurgeons are unfamiliar with the obturator nerve anatomy. The purpose of this study was to define obturator nerve landmarks around the obturator foramen. Methods : Fourteen cadavers were studied bilaterally to measure the distances from the nerve root to relevant anatomical landmarks near the obturator nerve, including the anterior superior iliac spine (ASIS), the pubic tubercle, the inguinal ligament, the femoral artery, and the adductor longus. Results : The obturator nerve exits the obturator foramen and travels infero-medially between the adductors longus and brevis. The median distances from the obturator nerve exit zone (ONEZ) to the ASIS and pubic tubercle were 114 mm and 30 mm, respectively. The median horizontal and vertical distances between the pubic tubercle and the ONEZ were 17 mm and 27 mm, respectively. The shortest median distance from the ONEZ to the inguinal ligament was 19 mm. The median inguinal ligament lengths from the ASIS and the median pubic tubercle to the shortest point were 103 mm and 24 mm, respectively. The median obturator nerve lengths between the ONEZ and the adductor longus and femoral artery were 41 mm and 28 mm, respectively. Conclusion : The obturator nerve exits the foramen 17 mm and 27 mm on the horizontal and sagittal planes, respectively, from the pubic tubercle below the pectineus muscle. The shallowest area is approximately one-fifth medially from the inguinal ligament. This study will help improve the accuracy of obturator nerve surgeries to better establish therapeutic plans and decrease complications.

• Journal of Korean Neurosurgical Society
• /
• 제54권4호
• /
• pp.275-279
• /
• 2013

Objective : This study was designed to determine the most reliable cephalometric measurement technique in the normal population and patients with basilar invagination (BI). Methods : Twenty-two lateral radiographs of BI patients and 25 lateral cervical radiographs of the age, sex-matched normal population were selected and measured on two separate occasions by three spine surgeons using six different measurements. Statistical analysis including intraclass correlation coefficient (ICC) was carried out using the SPSS software (V. 12.0). Results : Redlund-Johnell and Modified (M)-Ranawat had a highest ICC score in both the normal and BI groups in the inter-observer study. The M-Ranawat method (0.83) had a highest ICC score in the normal group, and the Redlund-Johenll method (0.80) had a highest ICC score in the BI group in the intra-observer test. The McGregor line had a lowest ICC score and a poor ICC grade in both groups in the intra-observer study. Generally, the measurement method using the odontoid process did not produce consistent results due to inter and intra-observer differences in determining the position of the odontoid tip. Opisthion and caudal point of the occipital midline curve are somewhat ambiguous landmarks, which induce variable ICC scores. Conclusion : On the contrary to other studies, Ranawat method had a lower ICC score in the inter-observer study. C2 end-plate and C1 arch can be the most reliable anatomical landmarks.

• Imaging Science in Dentistry
• /
• 제51권2호
• /
• pp.167-174
• /
• 2021

Purpose: Sex determination can be done by morphological analysis of different parts of the body. The mastoid region, with its anatomical location at the skull base, is ideal for sex identification. Statistical shape analysis provides a simultaneous comparison of geometric information on different shapes in terms of size and shape features. This study aimed to investigate the geometric morphometry of the inter-mastoid triangle as a tool for sex determination in the Iranian population. Materials and Methods: The coordinates of 5 landmarks on the mastoid process on the 80 cone-beam computed tomographic images(from individuals aged 17-70 years, 52.5% female) were registered and digitalized. The Cartesian x-y coordinates were acquired for all landmarks, and the shape information was extracted from the principal component scores of generalized Procrustes fit. The t-test was used to compare centroid size. Cross-validated discriminant analysis was used for sex determination. The significance level for all tests was set at 0.05. Results: There was a significant difference in the mastoid size and shape between males and females(P<0.05). The first 2 components of the Procrustes shape coordinates explained 91.3% of the shape variation between the sexes. The accuracy of the discriminant model for sex determination was 88.8%. Conclusion: The application of morphometric geometric techniques will significantly impact forensic studies by providing a comprehensive analysis of differences in biological forms. The results demonstrated that statistical shape analysis can be used as a powerful tool for sex determination based on a morphometric analysis of the inter-mastoid triangle.

• Imaging Science in Dentistry
• /
• 제39권3호
• /
• pp.149-156
• /
• 2009

Purpose : The purpose of this study was to develop a stent-based image guided surgery system and to apply it to oral and maxillofacial surgeries for anatomically complex sites. Materials and Methods : We devised a patient-specific stent for patient-to-image registration and navigation. Three-dimensional positions of the reference probe and the tool probe were tracked by an optical camera system and the relative position of the handpiece drill tip to the reference probe was monitored continuously on the monitor of a PC. Using 8 landmarks for measuring accuracy, the spatial discrepancy between CT image coordinate and physical coordinate was calculated for testing the normality. Results : The accuracy over 8 anatomical landmarks showed an overall mean of $0.56{\pm}0.16\;mm$. The developed system was applied to a surgery for a vertical alveolar bone augmentation in right mandibular posterior area and possible interior alveolar nerve injury case of an impacted third molar. The developed system provided continuous monitoring of invisible anatomical structures during operation and 3D information for operation sites. The clinical challenge showed sufficient accuracy and availability of anatomically complex operation sites. Conclusion : The developed system showed sufficient accuracy and availability in oral and maxillofacial surgeries for anatomically complex sites.

• The Journal of Advanced Prosthodontics
• /
• 제15권6호
• /
• pp.281-289
• /
• 2023

PURPOSE. This study aimed to predict the positional coordinates of incisor points from the scan data of conventional complete dentures and verify their accuracy. MATERIALS AND METHODS. The standard triangulated language (STL) data of the scanned 100 pairs of complete upper and lower dentures were imported into the computer-aided design software from which the position coordinates of the points corresponding to each landmark of the jaw were obtained. The x, y, and z coordinates of the incisor point (X_P, Y_P, and Z_P) were obtained from the maxillary and mandibular landmark coordinates using regression or calculation formulas, and the accuracy was verified to determine the deviation between the measured and predicted coordinate values. Y_P was obtained in two ways using the hamularincisive-papilla plane (HIP) and facial measurements. Multiple regression analysis was used to predict Z_P. The root mean squared error (RMSE) values were used to verify the accuracy of the X_P and Y_P. The RMSE value was obtained after crossvalidation using the remaining 30 cases of denture STL data to verify the accuracy of Z_P. RESULTS. The RMSE was 2.22 for predicting X_P. When predicting Y_P, the RMSE of the method using the HIP plane and facial measurements was 3.18 and 0.73, respectively. Cross-validation revealed the RMSE to be 1.53. CONCLUSION. Y_P and Z_P could be predicted from anatomical landmarks of the maxillary and mandibular edentulous jaw, suggesting that Y_P could be predicted with better accuracy with the addition of the position of the lower border of the upper lip.

• Journal of Korean Neurosurgical Society
• /
• 제51권5호
• /
• pp.253-261
• /
• 2012

Objective : This study was performed to determine the anatomical landmarks and optimal dissection points of the facial nerve (FN) and the hypoglossal nerve (HGN) in the submandibular region to provide guidance for hypoglossal-facial nerve anastomosis (HFNA). Methods : Twenty-nine specimens were obtained from 15 formalin-fixed adult cadavers. Distances were measured based on the mastoid process tip (MPT), common carotid artery bifurcation (CCAB), and the digastric muscle posterior belly (DMPB). Results : The shortest distance from the MPT to the stylomastoid foramen was $14.1{\pm}2.9$ mm. The distance from the MPT to the FN origin was $8.6{\pm}2.8$ mm anteriorly and $5.9{\pm}2.8$ mm superiorly. The distance from the CCAB to the crossing point of the HGN and the internal carotid artery was $18.5{\pm}6.7$ mm, and that to the crossing point of the HGN and the external carotid artery was $15.1{\pm}5.7$ mm. The distance from the CCAB to the HGN bifurcation was $26.6{\pm}7.5$ mm. The distance from the digastric groove to the HGN, which was found under the DMPB, was about $35.8{\pm}5.7$ mm. The distance from the digastric groove to the HGN, which was found under the DMPB, corresponded to about 65.5% of the whole length of the DMPB. Conclusion : This study provides useful information regarding the morphometric anatomy of the submandibular region, and the presented morphological data on the nerves and surrounding structures will aid in understanding the anatomical structures more accurately to prevent complications of HFNA.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권3호
• /
• pp.269-273
• /
• 1998

To clarify the clinical utility of the calvarial bone graft in the maxillofacial reconstruction, we performed on anatomical study by measuring the regional thickness of the parietal bone on 17 Korean adult dry skulls. Before the sectioning the calvarium, the anatomical landmarks were marked on each specimens. And then we measured the total thickness of the parietal bone, the thickness of the outer and inner cortical plates on various points in each sections of parietal bones using a digital caliper under the stereomicroscope. The total thickness of the parietal bone was ranged from 5.17mm to 7.50mm, and there were no statistical difference in the total thickness of the parietal bone on the same points bilaterally. But there was a tendency that the thickness of the parietal bone was thicker toward to the lambda point than the coronal suture area. At the other hand, the thickness of the outer and inner plate of the parietal bone was the thickest at the first point of the right aspect on the line 1, the first point of the left aspect on the line 5, respectively. In conclusion, this study showed that the donor site of the parietal bone for the maxillofacial reconstruction should be located at more posterior and medial area of the parietal bone than the prevalent known donor site.

• Archives of Plastic Surgery
• /
• 제43권6호
• /
• pp.529-535
• /
• 2016

Background The trapezius muscle flap is not usually the first reconstructive option for skin and soft tissue defects in the posterior neck and scalp due to surgeons' unfamiliarity with the surgical anatomy and developments in free tissue transfer techniques. The goals of this study were to describe the clinical use of trapezius flaps in posterior neck and scalp reconstruction, and to investigate the vascular anatomy of trapezius flaps in Asians in order to obtain information facilitating the safe design and elevation of flaps in which most of the muscle is preserved. Methods A retrospective chart review was performed of 10 patients who underwent trapezius muscle flap for posterior neck and scalp defects. We also performed an anatomical study of 16 flaps harvested from 8 preserved Asian adult cadavers and evaluated the main landmarks relevant for trapezius muscle flap. Results In the anatomical study, the mean vertical height from the inferior angle of the scapula to the point at which the superficial cervical artery penetrated the trapezius was $4.31{\pm}2.14cm$. The mean vertical height of the trapezius muscle flap pivot point was $9.53{\pm}2.08cm$ from the external occipital protuberance. Among the 10 flaps, partial necrosis on the overlaid skin graft occurred in 1 patient and postoperative seroma occurred in another patient. Conclusions Vascular variations in the trapezius muscle flap are uncommon in Asians, but when present, such variations appear to have little impact on harvesting the flap or on its circulation. The trapezius muscle flap is a viable alternative for posterior neck and scalp reconstruction.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1139-1145
• /
• 2014

인체 골격의 모델생성과 형상변동을 파악하는 것은 생체역학의 응용분야에서 중요한 부분을 차지한다. 본 논문에서는 3 차원 대퇴골 모델의 데이터베이스로부터 대퇴골의 형상변동을 통계적으로 분석하고, 추출된 주요 파라미터를 사용하여 대퇴골의 형상을 직관적으로 모델링 할 수 있는 방법을 제안한다. 이를 위해서 먼저 통계적 기법 중에 하나인 주성분 분석(PCA)을 이용하여 대퇴골의 형상변동을 파악하였다. 주성분 분석을 수행하기 위해서는 3 차원 대퇴골 모델 간에 토폴로지(Topology)의 일치가 필요하다. 따라서 대퇴골의 형상에 해부학적 기준점(Landmark)을 정의하여 템플릿 모델이 대상 대퇴골 모델로 변형되기 위한 방향을 결정한 후 곡면 피팅(Surface fitting)을 수행하였다. 다음으로 주성분 분석을 통해 도출된 주성분과 대퇴골의 형상을 대표할 수 있는 해부학적 파라미터와의 상관관계를 정의하였다. 마지막으로 해부학적 파라미터로 대퇴골 모델의 생성 및 형상변동을 가시화 할 수 있는 프로그램을 개발하였다.