• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.2
• /
• pp.115-121
• /
• 2013

For the auto-landing operation of an air vehicle, the possibility of auto-landing operation should be first evaluated by testing the navigation performance through a flight test. In general, navigation performance is tested by analyzing north/east/down (NED) errors relative to reference equipment whose precision is about 8~10 times higher than that of a navigation system. However, to evaluate the auto-landing operation of an air vehicle, whether the air vehicle approaches a glide path aligned with the runway, within a specific error, needs to be examined rather than examining the north/east errors of the navigation system. Therefore, the longitudinal/lateral errors of air vehicle heading need to be analyzed. In this study, a method for analyzing the longitudinal/lateral errors of a navigation system was proposed as the navigation performance test method for evaluating the safety during the auto-landing of an air vehicle. Also, flight tests were performed six times, and the safety of auto-landing was examined by analyzing the performance using the proposed method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.10c
• /
• pp.103-122
• /
• 2001

For prediction of ground movement per the excavation step, observational results of ground movement during the construction was very different with prediction during the analysis of design. step because of the uncertainty of the numerical analysis modelling, the soil parameter, and the condition of a construction field, etc. however accuratly numerical analysis method was applied. Therefore, the management system through the construction field measurement should be achieved for grasping the situation during the excavation. Until present, the measurement system restricted by ‘Absolute Value Management system’only analyzing the stability of present step was executed. So, it was difficult situation to expect the prediction of ground movement for the next excavation step. In this situation, it was developed that ‘The Management system TOMAS-EXCAV’ consisted of ‘Absolute value management system’ analyzing the stability of present step and ‘Prediction management system’ expecting the ground movement of next excavation step and analyzing the stability of next excavation step by‘Back Analysis’. TOMAS-EXCAV could be applied to all uncertainty of earth retaining structures analysis by connecting ‘Forward analysis program’ and ‘Back analysis program’ and optimizing the main design variables using SQP-MMFD optimization method through measurement results. The application of TOMAS-EXCAV was confirmed that verifed the three earth retaing construction field by back analysis.

• Korean Institute of Interior Design Journal
• /
• no.31
• /
• pp.56-63
• /
• 2002

This study intends to prepare a system that can be used, by applying digital technique, in analyzing complexity of architectural forms that have been visualized by the correlation based on the distribution chart made in accordance with profile lines. The profile lines are derived from the edge analysis of the architectural forms, simplified based on the visual theory. For the purpose, this study was conducted in the following ways: First, problems of the existing models for the elevation analysis were examined along with formal analysis based on visual recognition to consider the profile lines derived from the forms. Secondly, in elevation analysis, profile lines were derived by digital method to measure them qualitatively. To verify the objectivity of the measured data value, a survey was conducted based on the adjective cataloging method, and the correlation of the survey result and analyzed data was analyzed to verify the validity of the derived data. Thirdly, supplementation for the problems deducted from experiments and the possibility to use it in designing were suggested. Digital method has many advantages over the conventional analyzing system in deriving precise data value by excluding subjectivity. It also allows various analytical methods in analyzing numerous data repeatedly. Diversified models and methods of analysis considering numerous factors arising in the process of designing remain assignments to research in future.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.452-461
• /
• 1998

The pin power distribution is determined by analyzing the rotational gamma scanning data for 36 element fuel bundle of HANARO. A fission monitor of Nb$^{95}$ is chosen by considering the criteria of the half-life, fission yield, emitting ${\gamma}$-ray energy and probability. The ${\gamma}$-ray spectra were measured in Korea Atomic Energy Research Institute(KAERI) by using a HPGe detector and by rotating the fuel bundle at steps of 10$^{\circ}$. The counting rates of Nb$^{95}$ 766 keV ${\gamma}$-rays are determined by analyzing the full absorption peak in the spectra. A 36$\times$36 response matrix is obtained from calculating the contribution of each rod at every scanning angle by assuming 2-dimensional and parallel beam approximations for the measuring geometry. In terms of the measured counting rates and the calculated response matrix, an inverse problem is set up for the unknown distribution of activity concentrations of pins. To select a suitable solving method, the performances of three direct methods and the iterative least-square method are tested by solving simulation examples. The final solution is obtained by using the iterative least-square method that shows a good stability. The influences of detection error, step size of rotation and the collimator width are discussed on the accuracy of the numerical solution. Hence an improvement in the accuracy of the solution is proposed by reducing the collimator width of the scanning arrangement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1104-1109
• /
• 2001

In this paper, we describe a method for real-time transmitting video streams based on RTP. In order to guarantee synchronous video streams, we propose a method to grasp network situations by analyzing end-to-end network traffic. In addition, we present an algorithm for satisfying QoS requirements of real-time multimedia transmission and maintaining continuity of transmission. It describes a buffering method for overcoming bandwidth limitations and an analyzing method based on RTCP for grasping network traffic situation to resolve the problem of real-time transmission of video streams.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.220-226
• /
• 2011

This paper proposes a straightforward method of analyzing the operation characteristics for the capacitor run single-phase induction motor from the traditional equivalent circuit based on the revolving field theory. The proposed method consists of five procedures as follows: mechanical loss segregation, iron loss segregation and calculation of the equivalent circuit parameters, recalculation of parameters of the main winding side, calculation of the auxiliary winding magnetizing reactance and effective turn ratio, and analyzing the operation characteristics for this motor. When the characteristics are analyzed, the segregated mechanical and iron losses are considered as a loss resistance across input terminals of the equivalent circuit for the analysis. The validity of the proposed method is verified from the comparison between the computed results and the experimental ones for the operation characteristics.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.2
• /
• pp.42-45
• /
• 2001

An ozone condensation system is evaluated from the viewpoint of an ozone supplier for Bi-superconductor thin film growth. An ozone condenser by a selective adsorption on the silica gel surface is constructed. Ozone density is evaluated by three methods; ultraviolet absorption, thermal decomposition and Q-mass analyzing methods. Thermal decomposition method is found to be available to the density evaluation from dilute to highly condensed ozone. The highest ozone density condensed by the adsorption method is evaluated to be 97 mol%.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2004

GUI program for analyzing directional spectrum waves is introduced in this paper Basically, MLM (Maximum Likelihood Method) was used for this program which was additionally consisted of performing spectral and time domain analysis for two dimensional irregular waves. Moreover, the directionality of directional spectrum waves generated by single summation and double summation method was investigated based on MLM. The directionality from each summation method has good agreement compared with that of target wave spreading function in the case of single wide directional spectrum waves. In addition to this, the resolution of directionality in double summation method was investigated as introducing coherence function between each wave component

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.169-172
• /
• 2001

In this paper, we describe a method for real-time transmitting video streams based on RTP In order to guarantee synchronous video streams, we propose a method to grasp network situations by analyzing end-to-end network traffic. In addition, we present an algorithm for satisfying QoS requirements of real-time multimedia transmission and maintaining continuity of transmission. It describes a buffering method for overcoming bandwidth limitations and an analyzing method based on RTCP for grasping network traffic situation to resolve the problem of real-time transmission of video streams.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.81-87
• /
• 2009

The purpose of the present study is to establish structural noise analyzing method for apartments building floor with structural-acoustic coupling analysis modeling. Noise through floor in the room is recognized as a significant problem with the consequence that noise isolation technique has been studied in the various fields of industry. From among noise factors, resonance sound is the main reason for solid noise of the floor, which is occurred by mechanical vibrations of the acoustic boundary line and the change of velocity. To analyse this phenomenon, numerical computation methods are provided in many fields, In this study, evaluation method for slab is established using finite element method, and a case study for analyzing acoustic phenomenon was suggested. The results show that numerical method, especially F.E.M, has a good approximation to predict noise at floors.