• Steel and Composite Structures
• /
• v.4 no.2
• /
• pp.149-167
• /
• 2004

Offshore platforms have to serve in harsh environments and hence are likely to be damaged due to wave induced fatigue and environmental corrosion. Welded tubular joints in offshore platforms are most vulnerable to fatigue damage. Such damages endanger the integrity of the structure. Therefore it is all the more essential to assess the capacity of damaged structure from the point of view of its safety. Eight internally ring stiffened fatigue damaged tubular joints with nominal chord and brace diameter of 324 mm and 219 mm respectively and thickness 12 mm and 8 mm respectively were tested under axial brace compression loading to evaluate the reserve capacity of the joints. These joints had earlier been tested under fatigue loading under corrosive environments of synthetic sea water and hence they have been cracked. The extent of the damage varied from 35 to 50 per cent. One stiffened joint was also tested under axial brace tension loading. The residual strength of fatigue damaged stiffened joint tested under tension loading was observed to be less than one fourth of that tested under compression loading. It was observed in this experimental investigation that in the damaged condition, the joints possessed an in-built load-transfer mechanism. A bi-linear stress-strain model was developed in this investigation to predict the reserve capacity of the joint. This model considered the strain hardening effect. Close agreement was observed between the experimental and predicted results. The paper presents in detail the experimental investigation and the development of the analytical model to predict the reserve capacity of internally ring stiffened joints.

• Mass Spectrometry Letters
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2019

Amphetamine-type stimulants (ATS) are a group of ${\beta}$-phenethylamine derivatives that produce central nervous system stimulants effects. The representative ATS are methamphetamine and 3, 4-methylenedioxymethamphetamine (MDMA), and abuse of ATS has become a global problem. Methamphetamine is abused in North America and Asia, while amphetamine and 3, 4-methyle nedioxym ethamphetamine (Ecstasy) are abused in Europe and Australia. Methamphetamine is also the most abused drug in Korea. In addition to the conventional ATS, new psychoactive substances (NPS) including phenethylamines and synthetic cathinones, which have similar effects and chemical structure to ATS, continue to spread to the global market since 2009, and more than 739 NPS have been identified. For the analysis of ATS, two tests that have different theoretical principles have to be conducted, and screening tests by immunoassay and confirmatory tests using GC/MS or LC/MS are the global standard methods. As most ATS have a chiral center, enantiomer separation is an important point in forensic analysis, and it can be conducted using chiral derivatization reagents or chiral columns. In order to respond to the growing drug crime, it is necessary to develop a fast and efficient analytical method.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.111-119
• /
• 2015

BACKGROUND: Ethychlozate (ECZ) is a plant growth regulator of synthetic auxin for agricultural commodities (ACs). Accurate and sensitive method to determine ECZ in diverse ACs on global official purpose is required to legal residue regulation. As the current official method is confined to the limited type of crops with poor validation, this study was conducted to improve and extend the ECZ method using high-performance liquid chromatography (HPLC) in all the registered crops with method verification. METHODS AND RESULTS: ECZ and its acidic metabolite (ECZA) were both extracted from acidified samples with acetone and briefly purified by dichloromethane partition. ECZ was hydrolyzed to form ECZA and the combined ECZA was finally purified by ion-associated partition including hexane-washing. The instrumental quantitation was performed using HPLC/ FLD under ion-suppression of ECZA with no interference by sample co-extractives. The average recoveries of intra- and inter-day experiment ranged from 82.0 to 105.2% and 81.7 to 102.8%, respectively. The repeatability and reproducibility for intra- and inter-day measurements expressed as a relative standard deviation was less than 8.7% and 7.4%, respectively. CONCLUSION: Established analytical method for ECZ residue in ACs was applicable to the nation-wide pesticide residues monitoring program with the acceptable level of sensitivity, repeatability and reproducibility.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.275-282
• /
• 1993

A direct and simultaneous method to determine the $SiO_2$ and $ZrO_2$ in zircon sand of raw mineral and its treated one were studied by optical emission spectrometer using DC arc source. The synthetic standard was prepared by mixing with pure metal oxide, and it was diluted with buffer(graphite) and flux($Li_2B_4O_7$). The mixing ratio of buffer and flux and its dilution ratio to sample was investigated in order to choose the best excitation conditions. The optimum mixing and dilution ratios were 0.22:1 and 40, and the standard deviations of analytical results were 1.9% for $SiO_2$ and 4.7% for $ZrO_2$.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.265-272
• /
• 1999

A simultaneous profile analysis of 19 environmental estrogens, which act like estrogen and may effect the endocrine system by binding to hormone receptors or influencing cell signaling pathways, was attempted. The present method was based on the selected ion monitoring (SIM) mode of gas chromatography/mass spectrometry (GC/MS). It involves solid-liquid extraction, enzyme hydrolysis, liquid-liquid extraction and quantitative conversion into trimethylsilyl (TMS)-ether derivatives. Analytical recovery range was 47.6 ~ 99.5% and the RSD values of within-a-day and day-to-day test were 0.66 ~ 9.33%, 1.66 ~ 16.14%, respectively. The Korean reference values for the evaluation of environmental estrogen effects were established by this method.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.64-68
• /
• 2005

An analytical method of nine synthetic foods colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of Food Hygiene and Safety
• /
• v.19 no.4
• /
• pp.171-175
• /
• 2004

An analytical method of nine synthetic food colors in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA were compared. Contents of water insoluble matter in synthetic food colors tested were not different by general test methods of various organs. Contents of chloride and sulfate salts in Food Green No.3, Food Red No.3, Food Blue No.2, and Food Yellow No.4 slightly differed in various methods, and but up to the standard, and general test methods of JECFA and USA needed far more time. For the measurement of arsenic contents in food colors, colorimetric method in Korea and Japan, and silver diethyldithiocarbamate colorimetric method in USA and JECFA were used, but the standards of them were different. Content of heavy metals was up to the standard, but the methods were used colorimetric method in Korea, atomic absorption method in Japan, and both methods in JECFA and USA.

• Journal of Food Hygiene and Safety
• /
• v.20 no.2
• /
• pp.73-76
• /
• 2005

Center for Food Standard Evaluation, Korea Food and Drug AdministrationThis study was performed to compare analytical methods of nine synthetic food colors and six food color lakes in Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA. The experimental protocol of this study consists of three parts: titration method with titanium chloride, gravimetric and spectrophotometric method. To measure the total contents of food colors, Korea and Japan used titration method with titanium chloride, USA used the average value of titration method with titanium chloride equipped with Kipp generator and spectrophotometric method. Also, JECFA used titration method with titanium chloride equipped with KiPP generator. However, All the low organizations used gravimetric method to measure the total content of coloring matter on Food Red No.3. Although all organizations use various methods for analysis of coloring matters, total contents of coloring matter on food colors tested fell into the standard showing $85.08-96.40\%$ in synthetic food colors and $10.00-36.86\%$ in food color lakes.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.170-187
• /
• 2010

Much interest on the thermoplastic elastomers (TPEs) has recently been attracted in commercial fields as well as scientific and applied researches. The TPEs have their own characteristic area especially in relation with block copolymers as well as many other polymeric materials, since they show interesting features displayed by the conventional vulcanized rubber, and at the same time, by the thermoplastics. In addition, they are characterized by a set of interesting properties inherent to block and graft copolymers, variety of blends and vulcanized materials. The importance of TPE as organic materials can be evaluated by the number of published reports (papers, patents, technical reports, etc). The input of the concept 'thermoplastic elastomer' to SciFinderScholar yields 18,508 results between 1939 and July 10, 2010, and the number increased exponentially after the mid of 1990. For the suitable introduction of the TPE, historic, scientific, technical and commercial considerations should be taken into account. This review article starts with a brief discussion on historical considerations, followed by a introduction of the main preparations and analytical techniques utilized in chemical, structural, and morphological studies. The properties, processing tools, the position among organic materials, and applications of TPEs are also briefly reviewed. Finally, the most probable trends of their future development are discussed in a short final remarks.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1288-1288
• /
• 2001

X-ray powder diffraction (XRD) is utilized for determination of polymorphism in crystalline organic materials. Though convenient to use in a laboratory setting, XRD is not easily adapted to in situ monitoring of synthetic chemical production applications. Near-Infrared spectroscopy (NIR) can be adapted to in situ manufacturing schemes by use of a source/detector probe. Conversely, NIR is unable to conclusively define the existence of polymorphism in crystalline materials. By combining the two techniques, a novel simultaneous NIR/XRD instrument has been developed. During material's analysis, results from XRD allow for defining the polymorphic phase present, and NIR data are collected as a fingerprint for each of the observed polymorphs. These NIR fingerprints will allow for the development of a library, which can be referenced during the use of a NIR probe in manufacturing settings.