• Title/Summary/Keyword: Analytical mode

Search Result 935, Processing Time 0.031 seconds

Experimental studies of headed stud shear connectors in UHPC Steel composite slabs

  • Gao, Xiao-Long;Wang, Jun-Yan;Yan, Jia-Bao
    • Structural Engineering and Mechanics
    • /
    • 제74권5호
    • /
    • pp.657-670
    • /
    • 2020
  • Due to the high compressive and tensile strength of ultra-high performance concrete (UHPC), UHPC used in steel concrete composite structures provided thinner concrete layer compared to ordinary concrete. This leaded to the headed stud shear connectors embedded in UHPC had a low aspect ratio. In order to systematic investigate the effect of headed stud with low aspect ratio on the structural behaviors of steel UHPC composite structure s this paper firstly carried out a test program consisted of twelve push out specimens. The effects of stud height, aspect ratio and reinforcement bars in UHPC on the structural behaviors of headed studs were investigated. The push out test results shows that the increasing of stud height did not obviously influence the structural behaviors of headed studs and the aspect ratio of 2.16 was proved enough to take full advantage of the headed stud strength. Based on the test results, the equation considering the contribution of weld collar was modified to predict the shear strength of headed stud embedded in UHPC. The modified equation could accurately predict the shear strength of headed stud by comparing with the experimental results. On the basis of push out test results, bending tests consisted of three steel UHPC composite slabs were conducted to investigate the effect of shear connection degree on the structural behaviors of composite slabs. The bending test results revealed that the shear connection degree had a significantly influence on the failure modes and ultimate resistance of composite slabs and composite slab with connection degree of 96% in s hear span exhibited a ductile failure accompanied by the tensile yield of steel plate and crushing of UHPC. Finally, analytical model based on the failure mode of composite slabs was proposed to predict the ultimate resistance of steel UHPC composite slabs with different shear connection degrees at the interface.

Flexural behaviour of reinforced low-strength concrete beams strengthened with CFRP plates

  • Boukhezar, Mohcene;Samai, Mohamed Laid;Mesbah, Habib Abdelhak;Houari, Hacene
    • Structural Engineering and Mechanics
    • /
    • 제47권6호
    • /
    • pp.819-838
    • /
    • 2013
  • This paper summarises the results of an experimental study to investigate the flexural behaviour of reinforced concrete beams strengthened using carbon-fibre reinforced polymer (CFRP) laminate in four-point bending. The experimental parameters included are the reinforcing bar ratio ${\rho}_s$ and preload level. Four bar ratios were selected (${\rho}_s=0.13$ to 0.86%), representing the section of two longitudinal tensile reinforcements, with diameters of 8, 14, 16, and 20 mm in order to reveal the effect of bar ratio on failure load and failure mode. Eight beams that could be considered "full-scale" in size, measuring 200 mm in width, 400 mm in total height and 2300 mm in length, were tested. Three beams were selected with different bar ratios (${\rho}_1$, ${\rho}_2$, ${\rho}_3$), and considered as control specimens (without ), while three other beams identical to the control beams with the same CFRP laminates ratio and a seventh beam with ${\rho}_{min}$ (the lowest bar ratio) were also used. In the second part of the study, two beams with the bar ratio ${\rho}_2$ were preloaded at two levels, 50 and 100% of their ultimate loads, and then repaired. This experimental investigation was consolidated using an analytical model. The experimental and analytical results indicate that the flexional capacity and stiffness of strengthened and repaired beams using CFRP laminate were increased compared to those of control beams, and the behaviour of repaired beams was nearly similar to the undamaged and strengthened beams; unlike the ductility of strengthened beams, which was greatly reduced compared to the control.

혈장 중 황함유 화합물과 메틸말론산의 신속 간편한 분석법 개발; GC-MS-SIM을 이용한 호모시스테인혈증의 진단 (A Rapid, Simple Determination of Sulfur-containing Compounds and Methylmalonic Acid on Plasma using GC-MS-SIM for the Diagnosis of Homocysteinemia)

  • 윤혜란;마헤샬타파
    • 대한유전성대사질환학회지
    • /
    • 제15권3호
    • /
    • pp.138-146
    • /
    • 2015
  • Purpose: If early diagnosis is not made, patients with metabolic disorders as homocystinemia rapidly progress to physical defect or mental retardation resulted in storage of the toxic material into the brain. Therefore, it is necessary to develop an analytical method for a rapid screening and/or correct confirmation diagnosis. Methods: The standard solution of sulfur amino acids spiked plasma was subjected to protein precipitation with methanol, and then consecutively derivatized with trimethylsilyl (TMS) and trifluoroacyl (TFA) and determined by GC-MS. The formation of TMS derivative of the hydroxyl and TFA derivative of amino functional group was performed by BSTFA and MBTFA, respectively. Selective ion monitoring (SIM) mode was used for quantification with selected specific ions. Results: A calibration curve on standard spiked pooled plasma showed a linear relationship with correlation coefficient of 0.9936-0.9992 for all compounds over the range of 0.1-300 ng. The precision and accuracy were within S.D. of 1-15% and RSD of 1-15% for intra-day assay at 2 ng/mL, 15 ng/mL and 30 ng/mL. LOD and LOQ was 0.4 ng/mL and 4 ng/mL respectively. Conclusion: A rapid analytical method was developed to quantify sulfur amino acids and methyl malonic acid, after two-step derivatization procedure with good sensitivity and specificity on human plasma. Advantages of a new method are simplicity and rapidity. The method could be useful for routine analysis, diagnosis of homocysteinemia.

수질 및 저질중의 프탈산 에스테르와 아디피산 분석 (Determination of Phthalate Esters and Adipate in Water and Sediment Samples)

  • 명승운;장윤정;민혜기;김명수
    • 분석과학
    • /
    • 제13권5호
    • /
    • pp.616-623
    • /
    • 2000
  • Phthalates 8종 및 adipate에 대해 수질 및 저질중의 함유량을 동시에 측정하였다. 수질의 경우는 n-헥산을 사용하여 액체-액체 추출법으로 추출하였고 농축시킨 후 n-헥산에 용해시켜서 분석하였으며 저질의 경우에는 디클로로메탄을 추출용매로 사용하여 초음파세정기를 이용하여 추출한 후 농축시켜서 이소옥탄에 용해시켜서 GC/MS에 주입하여 SIM 방법으로 분석하였다. 그 결과 0.1-20 ng/ml(수질)과 10-500 ng/g(저질, DEP: 10-250 ng/g; DEHP: 10-2000 ng/g)의 정량구간내에서 $R^2=0.993$ 이상의 좋은 직선성을 나타내었으며 검출한계는 0.1 ng/ml(수질)과 10 ng/g(저질) 이하이있다. 본 분석방법은 낮은 농도에서도 정밀도와 정확도가 양호하였다.

  • PDF

LC-MS/MS를 이용한 소의 근육과 간 중에 잔류하는 glucocorticoids 동시 분석 (Simultaneous analysis of glucocorticoids in bovine muscle and liver by LC-MS/MS)

  • 신상은;조현우;명승운
    • 분석과학
    • /
    • 제23권4호
    • /
    • pp.405-413
    • /
    • 2010
  • 축산물(소의 근육 및 간)중에 잔류하는 합성 글루코코티코이드 6종 (betamethasone, dexamethasone, prednisone, prednisolone, methylprednisolone, flumethasone)에 대한 동시분석방법을 확립하였다. 효과적인 기기분석을 위해서 시료는 C18 고체상 카트리지를 사용하여 에틸아세테이트 용매를 사용하여 추출/정제하였다. C18 컬럼을 사용하여 분리한 후 음이온 전기분무 질량분석법의 multiple reaction monitoring 방법을 사용하여 정량 및 정성 분석을 수행하였다. 효과적이고 감도있는 HPLC-MS/MS 분석을 위해서 0.1% 포름산이 포함된 물과 아세토나이트릴이 이동상 용매로 사용되었다. 메트릭스와 약물의 종류에 따라서 검출한계(LOD)는 $0.2-0.1\;{\mu}g$/kg, 정량한계(LOQ)는 $0.8-3.4{\mu}g$/kg 이었으며, 회수율은 89.5-119.6%이었다. 확립된 기존의 방법들에 비해 6종의 글루코코티코이드의 동시분석 방법이 간소화되었고, 좋은 정확도, 정밀도 및 회수율을 나타내었으며, 축산 육류 중에 잔류하는 글루코코티코이드들 분석하는데 사용될 수 있을 것이다.

콩 함유 사포닌의 종류 및 함량 분석 (HPLC/MS/MS Method for Determination of Soyasaponins in the Soybean Varieties)

  • 한상준
    • 한국작물학회지
    • /
    • 제56권3호
    • /
    • pp.244-249
    • /
    • 2011
  • 본 연구는 콩 함유 사포닌의 함량을 쉽고 빠르게 정량할 수 있는 방법을 개발하기 위하여 시도하였다. 사포닌 표준 물질인 soyasaponin I은 대두에서 직접 분리하여 동정하였고, 분석은 HPLC/MS/MS를 이용하였으며 그 결과는 다음과 같다. 1. DAD 또는 ELSD를 이용하여 분석할 때보다 전처리 과정을 획기적으로 줄일 수 있어 신품종 육성의 선발과 같은 대량의 분석에 적합하였다. 2. Soyasaponin I의 함량은 나물콩과 같은 소립종에서 대립종에 비해 함량이 유의하게 높은 것으로 나타났다.

토실 활성화된 폴리스티렌 마이크로구체 자성 입자 표면의 화학적 변형에 대한 적외선 연구 (Investigation of chemical modification on tosyl-activated polystyrene microsphere magnetic particle surface by infrared microscopy)

  • 변창규
    • 분석과학
    • /
    • 제29권5호
    • /
    • pp.225-233
    • /
    • 2016
  • 입자 표면에 고분자를 화학적으로 접목하는 것은 수용성 액체 이상 시스템(ATPS)과 같이 분리된 액체 층에서 마이크로/나노입자를 선택적으로 분배시키는데 중요한 구실을 한다. 본 연구에서는 덱스트란, 폴리에틸렌 글리콜, 알부민을 화학적으로 폴리스티렌 자성 마이크로입자 표면에 화학적으로 부착시켰다. 분배 현상을 역전시킬 수 있는 긴 고분자 사슬의 부착은 일차 아민 작용기를 가진 다양한 고분자를 p-톨루엔술폰산(토실)기를 부착시킨 폴리스티렌 자성 마이크로입자와의 SN2 치환에 의해 간단히 수행될 수 있었다. 이 후 적외선 현미경을 사용하여 마이크로입자의 표면 변화의 유무를 검사하였다. 반응 후 입자들은 세 가지 폴리머 모두 N-H 신축 진동 피크를 보였으며 대부분의 주요 피크들의 위치는 반응 전후에 유사하였으나 지문 영역에서 구별 가능한 차이를 보였다.

유리섬유시트로 보강된 RC 보의 휨 거동에 관한 연구 (Flexural Behaviors of Reinforced Concrete Beams Strengthened with Glass Fiber Sheets)

  • 김성도;조백순;성진욱
    • 한국철도학회논문집
    • /
    • 제12권3호
    • /
    • pp.388-395
    • /
    • 2009
  • 유리섬유시트로 보강된 철근콘크리트 보의 휨 거동을 조사하기 위해, 하나의 기준보와 8개의 보강보(4개의 NU-보강보, 4개의 U-보강보)에 대한 보강보 휨 실험을 수행하였다. NU 보강보는 단부에 U 밴드를 적용하지 않은 보를, U-보강보는 U 밴드를 가진 보를 의미한다. 보강보 실험에서의 실험변수들은 유리섬유시트의 보강 양, U 밴드의 유무 등이 있다. 기준보와 비교하여 NU 보강보와 U 보강보의 최대하중은 각각 48%와 34% 증가하였으며, 휨 강성은 각각 920%와 880% 증가하였다. NU 보강보와 U 보강보에 대한 연성지수는 1.43에서 2.60 사이에 놓여있다. U 밴드를 가진 보강 시스템은 섬유시트의 계면박리 파괴를 지연시키고, U 밴드가 없는 보강시스템보다 나은 연성거동을 나타내 보였다. NU 보강보와 U 보강보 모두에서 섬유시트 겹수의 증가에 따라 최대하중과 휨 강성은 증가하였다. 실험결과들을 이론적인 비선형 휨 해석결과와 비교하였으며, 잘 일치함을 확인하였다.

모바일 애드혹 네트워크를 위한 Isochronous MAC 프로토콜의 분석적 모델 연구 (Analytical Model of Isochronous MAC Protocol for MANET)

  • 허웅;최재호
    • 대한전자공학회논문지TC
    • /
    • 제45권2호
    • /
    • pp.111-118
    • /
    • 2008
  • 본 논문은 모바일 애드 혹 네트워크에서 실시간 서비스를 지원하기 위한 새로운 매체 접속 기법 time-slot reservation coordination function(TRCF)과 이를 평가하기위한 수학적 모델을 제시한다. 모바일 애드 혹 네트워크에서 실시간 서비스 지원을 위한 연구는 대부분 DCF를 활용해 왔다. 그러나 이런 연구들은 지연에 민감한 실시간 트래픽을 지원할 수 없다. 우리의 프로토콜은 TRCF와 DCF 두 부분으로 구성되어진다. TRCF는 실시간 서비스를 위해 예약 기법이 적용된 TDMA 기반 모드(MODE)이고 DCF는 best effort 트래픽 지원을 위해 IEEE 802.11 표준의 기능이 그대로 유지된다. 그리고 실시간 서비스를 위해 64Kbps 음성 전화 서비스를 고려한다. 본 논문은 또한 제안된 MAC을 평가하기 위해 마코프 체인을 사용한 성능 분석 모델을 제시한다. TDMA의 특성을 고려하여 시간변화에 따른 마코브 체인의 상태와 천이 확률이 유도된다. 제안된 성능 평가 모델을 통해 음성 전화 서비스가 연결되어지기까지 소요되는 평균대기 시간, 처리량, 지연과 같은 성능 측정값을 도출한다.

인삼품질에 있어 체형과 화합물과의 관계 (Shape and Compound Relationship in Ginseng Quality)

  • 박훈;이미경;조병구
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1988년도 학술대회지
    • /
    • pp.133-138
    • /
    • 1988
  • 인삼품질에 대한 전통개념을 역사적 경험, 전통적 품질관리방법 및 분석적 방법과 관련하여 조사하였다. 전통개념은 생명과 우주가 하나라는 한국의 기본사상에 근거한 것으로 보인다. 전통품질관리법에서 모양과 크기는 특정한 조직, 세포 및 세포내의 생리적 활성물질을 규정하기 때문에 전통품질관리법은 분석방법이 활성물질을 찾아가는 지도가 될 것이다. 전통법은 생물활성 물질간의 균형이 한 물질의 함량보다 중요하며 인체의 항샹성을 위한 활성물질의 작용양식도 여러 화합물, 여러 목표체계인 것으로 보인다. 인삼이 클 수록 중심부가 더 빨리 크고 중심부에는 질소화합물이 많기 때문에 전통법은 질소 화합물 특히, 수용성 단백질과 열안정단백질들이 활성물질의 균형에 있어 중요함을 강력히 시사한다. 생물활성물질의 균형은 삼속의 종간 사용방법의 차이와 의미있게 관계를 보인다.

  • PDF