• Ocean and Polar Research
• /
• v.27 no.4
• /
• pp.397-417
• /
• 2005

Phytoplankton community structure and distribution pattern in the surface water around the Ieodo Ocean Research Station were investigated during seven cruises carried out from July, 2003 to October, 2004. Samples were analyzed using various tools including a microscope, flow cytometer, and HPLC. Satellite images were used to analyze spatio-temporal phytoplankton biomass distribution. SeaWiFS chlorophyll a (chl a) images showed that spring blooms occurred in April-May near the Ieodo Station, and these waters were under the influence of Changjiang Dilute Water during July-October. Also, during the July-October period, HPLC pigments data showed increasing zeaxanthin concentrations, a marker pigment of cyanobacteria whereas increasing concentrations of various other pigments such as fucoxanthin, peridinin, prasinoxanthia alloxanthin, 19'-hexanoyloxyfucoxanthin and chlorophyll b were noted during spring blooms. Such pigment marker data were consistent with picoplankton data analyzed by flow cytometer and nano-microplankton analyzed by microscope. The pigment-CHEMTAX method was used to drive the phytoplankton group apportioned chi a. Diatoms, chlorophytes, dinoflagellates, and cryptophytes comprised 25.8, 20.7, 15.9, and 14.1%, respectively, of the total chl a in May. Average cyanobacteria concentrations in July-October contributed 25.4% of the total concentration. This was the highest percent contribution and was followed by chlorophytes, diatoms, and prymnesiophytes. This study discusses results from various methods, similarities and differences in the results among those methods, and the application range of the results from different analytical methods. Also, the study reveals a detailed phytolpankton community structure in the waters around the Ieodo Station, and suggests future monitoring considerations in relation to cell morphology, ecology and diversity factors according to taxonomic groups.

• Journal of Korean Academy of Nursing
• /
• v.24 no.1
• /
• pp.96-114
• /
• 1994

This study was carried out to describe and analyze experimental studies conducted in graduates nursing degree. Of 170 experimental studies conducted during the past three decades between 1962 and August 1991, 150 studies were available, including 124 master’s and 26 doctoral theses. This study examined their general characteristics and detailed research methods using percentiles. The results were as follows 1. Most of the studies adopted a quasi-experimental design. 2. The subjects of the studies were chosen by convenience sampling except for two studies whose subjects were drawn by randomization. Studies comparing experimental and control groups were in the highest proportion and the most frequent sample sizes of each group were 21 to 30 for both experimental and control groups. 3. As to measurement, physiological measures were most frequent followed by psychsociological measures and active report questionnaires. Each study, on average, adopted two kind of measurement tools. Studies in which the data collection period was of 1~2 months were in the highest pro-portion. 4. All doctoral theses and 67.0% of master’s theses examined specific research hypotheses. Of these studies, the results of 92.5% supported the hypotheses. 5. Parametric statistics were the major analytical methods. In particular, t-test was used most frequently followed by Chi square, F-test, and Pearson Correlation Coefficients. 6. Patients were the most frequent study subjects. Frequent nursing interventions were information and education followed by support, distraction, and nursing treatments. 7. With regards to the dependent variables, “feelings” such as anxiety, pain, and depression were most frequent. In addition “exchanging” such as restoring, metabolism, cardiopulmonary function, infection and vital signs were adopted as the dependent variables in 29.1％ of the studies examined, while 12.3% of the studies selected “choosing” such as stress, health behavior, or role performance.

• Journal of Korea Game Society
• /
• v.15 no.4
• /
• pp.121-132
• /
• 2015

This study suggests a design for an analytical software program and method for multitasking e-sports viewing through the web using an eye tracking device. To fulfill this task, we designed a Window of Interest (WOI) to measure and record visually on a screen wherever numerous multitasking activities occur. In addition, we developed an OBS (Opensource Broadcaster Software) plug-in that records and streams participant viewing behavior patterns in real time. The purpose of this study is as follows. First, unlike existing tools that limit web interface recording to still images, the developed tool can record dynamically via media such as videos. Second, when several windows are processed on a screen, the tool can accurately record the gaze positions of the participants. Lastly, the tool can enhance the objective validity of the data as it can be implemented in natural situations. Therefore, this study can trace natural viewing patterns and behavior as we do not create artificial experimental environments and stimuli.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.582-585
• /
• 2018

As traffic volume increases and road networks become more complicated, identifying for accurate traffic flow and driving smooth traffic flow are a concern of many countries. There are various analytical techniques and studies which desire to study about effective traffic flow. However, the necessary activity is finding the traffic flow pattern through data visualization including location information. In this paper aim to study a real-world urban traffic trajectory and visualize a pattern of traffic flow with a simulation tool. Our experiment is installing the sensor module in 40 taxis and our dataset is generated along 24 hours and unscheduled routes. After pre-processing data, we improved an open source traffic visualize tools to suitable for our experiment. Then we simulate our vehicle trajectory data with a dots animation over a period of time, which allows clearly view a traffic flow simulation and a understand the direction of movement of the vehicle or route pattern. In addition we further propose some novel timelines to show spatial-temporal features to improve an urban environment due to the traffic flow.

• Interaction and multiscale mechanics
• /
• v.3 no.1
• /
• pp.95-110
• /
• 2010

In recent years, study of the static response of pavements to moving vehicle and aircraft loads has received significant attention because of its relevance to the design of pavements and airport runways. The static response of beams resting on an elastic foundation and subjected to moving loads was studied by several researchers in the past. However, most of these studies were limited to steady-state analytical solutions for infinitely long beams resting on Winkler-type elastic foundations. Although the modelling of subgrade as a continuum is more accurate, such an approach can hardly be incorporated in analysis due to its complexity. In contrast, the two-parameter foundation model provides a better way for simulating the underlying soil medium and is conceptually more appealing than the one-parameter (Winkler) foundation model. The finite element method is one of the most suitable mathematical tools for analysing rigid pavements under moving loads. This paper presents an improved solution algorithm based on the finite element method for the static analysis of rigid pavements under moving vehicular or aircraft loads. The concrete pavement is discretized by finite and infinite beam elements, with the latter for modelling the infinity boundary conditions. The underlying soil medium is modelled by the Pasternak model allowing the shear interaction to exist between the spring elements. This can be accomplished by connecting the spring elements to a layer of incompressible vertical elements that can deform in transverse shear only. The deformations and forces maintaining equilibrium in the shear layer are considered by assuming the shear layer to be isotropic. A parametric study is conducted to investigate the effect of the position of moving loads on the response of pavement.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.44-51
• /
• 2007

Purpose: Blow-out fracture is one of the most common fractures in facial trauma. It is diagnosed by Computed Tomography(CT) scan, which is considered as the most effective diagnostic tool. Since, the Picture Archiving Communication System(PACS) has been provided recently to many hospitals, doctors are more familiar with imaging software of PACS. Because this software has many useful measuring tools, doctors can measure orbital structure easily and make a plan for treatment with its data. Therefore, authors intended to analyze the data of orbital structure measured with PACS imaging software and evaluate its usefulness. Methods: The charts and CT images of 100 patients, which were 50 patients with medial wall fracture and 50 patients with floor fracture, were reviewed. Patients were selected by pre-determined criteria and their CT images were measured with image software of PACS. 'Extraocular muscle thickness', 'Defect ratio'(ratio of defect area to normal area) and 'Globe position index' were measured and analyzed statistically. Results: The thickness of inferior rectus muscle and medial rectus muscle was simultaneously increased in acute-stage of blow-out fracture. The medial rectus muscle was more thickened in medial wall fracture and inferior rectus was more thickened in floor fracture, respectively. In acute blow-out fracture, globe position is exophthalmic rather than enophthalmic. Especially in floor fracture, numerical value summed up thickness of all extraocular muscle is correlated to the defect ratio and globe position index. Conclusion: Clinicians can decide globe position or presume defect ratio in inferior wall fracture by measurement of CT image in acute blow-out fracture using PACS.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.4
• /
• pp.99-124
• /
• 2015

As the improvement of digital technologies increases the use of images from various fields, the domain of image retrieval has evolved and become a growing topic of research in the Library and Information Science field. The purpose of this study is to identify the knowledge structure of the image retrieval domain by using the author co-citation analysis and author bibliographic coupling as analytical tools in order to understand the domain's past and present. The data set for this study is 245 articles with 8,031 cited articles in the field of image retrieval from 1998 to 2013, from the Web of Science citation database. According to the results of author co-citation analysis for the past of the image retrieval domain, our findings demonstrate that the intellectual structure of image retrieval in the LIS field consists of predominantly user-oriented approaches, but also includes some areas influenced by the CBIR area. More specifically, the user-oriented approach contains six specific areas which include image needs, information seeking, image needs and search behavior, image indexing and access, indexing of image collection, and web image search. On the other hand, for CBIR approaches, it contains feature-based image indexing, shape-based indexing, and IR & CBIR. The recent trends of image retrieval based on the results from author bibliographic coupling analysis show that the domain is expanding to emerging areas of medical images, multimedia, ontology- and tag-based indexing which thus reflects a new paradigm of information environment.

• Korean Journal of Legislative Studies
• /
• v.23 no.2
• /
• pp.37-66
• /
• 2017

Massive civic protests and consequent presidential impeachment requires a serious revisiting to democratic theories of Korean democracy. This paper explores the strengths and limitations of macro and micro approaches. Changes in democratic realities was manifested on three fronts. First, the rise of new political subject, that is, participants to massive protest. Second, changing nexus between representative institutions and civic protests. Third, parliamentarization of presidential democracy. Specifically macro approach has changed its negative assessment of democracy into positive evaluation. Macro theory has to revisit it's notion of 'minjung' to cope with the rise of new subject. Also macro approach has to struggle with the declining role of civic organizations and political activists. Micro approach has to deal with new mode of networking among citizens and to unravel the evolving relation between democratic institutions and civic protests. In sum, theories need to expand the analytic scope, to revitalize analytic tools and to rebalance value judgment and analytical efforts.

• Advances in nano research
• /
• v.4 no.1
• /
• pp.15-29
• /
• 2016

A low cost environmentally benign surface coating binder is highly desirable in the field of material science. In this report, castor oil based hyperbranched polyester/bitumen modified fly ash nanocomposites were fabricated to achieve the desired performance. The hyperbranched polyester resin was synthesized by a three-step one pot condensation reaction using monoglyceride of castor oil based carboxyl terminated pre-polymer and 2,2-bis (hydroxymethyl) propionic acid. Also, the bulk fly ash of paper industry waste was converted to hydrophilic nano fly ash by ultrasonication followed by transforming it to an organonano fly ash by the modification with bitumen. The synthesized polyester resin and its nanocomposites were characterized by different analytical and spectroscopic tools. The nanocomposite obtained in presence of 20 wt% styrene (with respect to polyester) was found to be more homogeneous and stable compared to nanocomposite without styrene. The performance in terms of tensile strength, impact resistance, scratch hardness, chemical resistance and thermal stability was found to be improved significantly after formation of nanocomposite compared to the pristine system after curing with bisphenol-A based epoxy and poly(amido amine). The overall results of transmission electron microscopic (TEM) analysis and performance showed good exfoliation of the nano fly ash in the polyester matrix. Thus the studied nanocomposites would open up a new avenue on development of low cost high performing surface coating materials.