• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.96-101
• /
• 2015

In recent years, researches regarding optimal placement of CCTV(Closed-circuit Television) cameras via architecture modeling has been conducted. However, for analyzing surveillance coverage through actual human movement, the application of VA(Video Analytics) function of IP(Internet Protocol) cameras has not been studied. This paper compares two methods using data captured from real-world cameras and data acquired from a virtual environment. In using real cameras, we develop GUI(Graphical User Interface) to be used as a logfile which is stored hourly and daily through VA functions and to be used commercially for placement of products inside a shop. The virtual environment was constructed to emulate an real world such as the building structure and the camera with its specifications. Moreover, suitable placement of the camera is done by recognizing obstacles and the number of people counted within the camera's range of view. This research aims to solve time and economic constraints of actual installation of surveillance cameras in real-world environment and to do feasibility study of virtual environment.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.33-44
• /
• 1999

The boundary element method was newly implemented into an optical lithography simulator so that it could evaluate rigorously the topological effects of 2dimensional phase-shifting masks. Both transparent and periodic boundary conditions were applied for the method, and the continuity conditions were used for treating interface nodes. The accuracy of the module developed for simulating aerial images was verified by comparison with analytic solutions and published results. In addition, it was found that our simulator would be more efficient than the conventional method based on the rigorous coupled wave analysis in views of the convergence and the calculation speed. Finally, the optimal design of two phase-shifting masks was performed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.95-102
• /
• 2010

As the electric power industry is evolving into competitive market scheme, a new paradigm is required for the operation of market. Traditional dispatch algorithm was built based on the optimization model with an objective function and multiple constraints. Commercial market simulator followed the concept of the microeconomic model used in the dispatch algorithm, which is called as analytic method. On analytic method it is prerequisite to procure the exact data for the simulation. It is not easy anymore for each market participant to access to other participants' financial information while it used to be easy for monopoly decision maker to know all the information needed for the optimal operation. Considering the changing situation, it is required to introduce a new method for estimating the market price. This paper proposes an empirical method based on stochastic processes expected to build a capacity planning and long term contracts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.345-352
• /
• 2021

The Republic of Korea Army (ROK Army) is trying to improve the effectiveness of education and training. On the other hand, there are many restrictions in actual training, limiting their practical education and training. Virtual reality technology is being used to overcome these limitations. Virtual reality technology is developing in various types, and the ROK Army needs to introduce a virtual reality training system for cost-effective education. The ROK Army mainly uses high-cost simulator-types that are similar to real equipment. Recently, a low-cost immersive-type virtual reality training system wearing an HMD is also being used. This study analyzed the cost education effectiveness of simulator-type and immersive-type virtual reality training systems in operation at the ROK Army air defense school. First, the research method used AHP to analyze the educational effects. Second, the cost was applied to the production cost of the virtual reality training system to analyze the cost-effectiveness of the education. The immersion-type was 3.4 times higher than the simulator-type in terms of cost effectiveness. These results can be used as basic data for analyzing the cost-effectiveness of a virtual reality training system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.168-171
• /
• 1997

TFT2DS was developed to provide the usefulness as an analytic and design tool. The static characteristics of a-Si:H TFTs demonstrated a good agreement between simulated and measured data. This paper shows that TFT2DS can optimize the physical parameters of a-Si:H through sensitivity simulations and compute the static characteristics of a-Si:H TFTs. Moreover, through the sensitivity study of the parameters, it is shown that the optimizations of both the physical parameters of a-Si:H and the parameters of a-Si:H deposition, which must be inter-related, might be possibl.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2017

Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.99-109
• /
• 2010

Recently, SIW(Substrate Integrated Waveguide) is intensively studied because of its high Q and easy integration with other devices. However, lacks of analytic characterization of SIW makes it difficult an accurate design of a SIW filter along the conventional filter design method. In this paper, two kinds of a three-stage 10 GHz SIW bandpass filter of fractional bandwidth 10% are designed using 3D EM simulator HFSS based on the recently presented EM filter design method. Two types of a modified CPW to SIW transition is proposed and employed as a SIW to microstrip transition necessary for measurement. The transitions provide an easy measurement with commercial test fixture by TRL calibration. The two proposed transitions are included in the SIW filters. The fabricated filters shows the center frequency of 10 GHz, fractional bandwidth 10%, a return loss of about 12 dB, and insertion loss of about 0.8 dB.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.73-80
• /
• 2000

The stewart platform manipulator proposed by stewart is the parallel manipulator which is composed of several independent actuators connecting the upper plate with the base plate and capable of executing a six degree of freedom motion. The manipulator has a structure of a closed loop form, and provides better load-to-weight ratio and ratio and rigidity than a serial manipulator with an open loop form. Moreover, the manipulator has high positional accuracy because position errors of actuators are not additive. Because of these advantages, this manipulator is widely used in many engineering applications such as a driving simulator, a tool of machining center, a force/torque sensor and so on. When this Stewart platform manipulator is controlled in joint space, it is difficult to design a controller using an analytic method due to nonhnearity and unknown parameters of actuators. Therefore, a PID controller is often used because of easiness in applications. To find the PID control gain, a trial-and-error method is generally used. This method is time-consuming, and does not guarantee a optimal gain. Thus, this paper proposes a GA-PID controller which selects an optimal PID control gain using genetic algorithms. And this proposed controller is evaluated experimentally and shows acceptable performance.