• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.429-438
• /
• 2009

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of cell phone is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of cell phone.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2100-2106
• /
• 2020

This paper newly proposes an efficient analytic springback prediction method to predict the final dimensions of bent cylindrical tubes for a helical tube steam generator in a small modular reactor. Three-dimensional bending procedure is treated as a two-dimensional in-plane bending procedure by integrating the Euler beam theory. To enhance the accuracy of the springback prediction, mathematical representations of flow stress and elastic modulus for unloading are systematically integrated into the analytic prediction model. This technique not only precisely predicts the final dimensions of the bent helical tube after a springback, but also effectively predicts the various target radii. Numerical validations were performed for five different radii of helical tube bending by comparing the final radius after a springback.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.473-478
• /
• 2012

In this paper, the air bubble formation mechanism in the rectangular and triangular line-and-space pattern during dispensing UV Nanoimprint Lithography (UV-NIL) at an atmospheric condition is studied. To investigate the air bubble formation, an analytic model based on geometric approach and a numerical model based on CFD(computational fluid dynamics) were used in the analysis. It was found in the numerical analysis that every time the flow front passed through a corner of the pattern, it proceeded with a newly formed shape, occurring due to interface reconfiguration, since the flow fronts were formed such that they minimized the surface energy. Moreover, the conditions for the air bubble formation were investigated by applying the analytic analysis based on geometric approach and the numerical analysis. Good overall agreement was found between the analytic and numerical analysis.

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.413-422
• /
• 2022

TBM is widely used in the construction of various underground projects in the current world, and has the unique advantages that cannot be compared with traditional excavation methods. However, due to the high cost of TBM, the damage is even greater when geological disasters such as collapse occur during excavation. At present, there is still a shortage of research on various types of risk prediction of TBM tunnel, and accurate and reliable risk prediction model is an important theoretical basis for timely risk avoidance during construction. In this paper, a prediction model is proposed to evaluate the risk level of tunnel collapse by establishing a reasonable risk index system, using analytic hierarchy process to determine the index weight, and using the normal cloud model theory. At the same time, the traditional analytic hierarchy process is improved and optimized to ensure the objectivity of the weight values of the indicators in the prediction process, and the qualitative indicators are quantified so that they can directly participate in the process of risk prediction calculation. Through the practical engineering application, the feasibility and accuracy of the method are verified, and further optimization can be analyzed and discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.853-858
• /
• 2003

A new method is proposed to obtain bond-slip model for an adhesive joint between FRP and concrete. Interface element, which can describe the bond behavior, is developed in order to overcome the restriction that complex constitutive relations cannot be modeled in analytic solution. Calibrating numerical bond-slip model to experimental results, multi-objective optimization problem is constructed by physical programming method, and is solved using genetic algorithm. The validity of proposed method is demonstrated by comparing known analytic solution and numerically optimized solution.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.359-369
• /
• 2010

In order to find out the customer requirements and to develop new products more effectively, the Kano model and QFD(Quality Function Deployment), AHP(Analytic Hierarchy Process) developed and applied. But, Many companies difficult to select the CTQ(Critical to Quality) of new product. Especially the life cycle of Digital Camera is very short. In this thesis, the Kano model and AHP(Analytic Hierarchy Process) for finding the CTQ(Critical to Quality) for customer satisfaction are suggested. It is explained and discussed with the example of Digital Camera.

• Journal of the Korea Society for Simulation
• /
• v.2 no.1
• /
• pp.46-54
• /
• 1993

Analytic and simulation models for prioritized token ring are presented in this paper. Its protocol is based on prioritized token ring with reservation (R-PTR). Since the protocol of the R-PTR is simple and the performance of the R-PTR is not inferior to that of the IEEE-PTR under almost all traffic load environments, we use the R-PTR as our token ring model. By using the properties of Markovian process, the expressions for average throughput and average packet transmission delay are derived. The results obtained from the analytic model are compared with that of the discrete event simulation model.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.27-34
• /
• 1998

This paper is on the discrete model reduction method over disc-type analytic domains. We define hankel singular value over the disc that is mapped by standard bilinear mapping. And the generalized singular perturbation approximation and the direct truncation are generalized to GSPA and DT over a disc. Furthermore, it is shown that the reduced order model over a smaller domaing has a smaller .inf.-norm error bound. And the poposed reduction method is used to obtain the regional pole placement property.

• Journal of Korean Academy of Nursing
• /
• v.52 no.4
• /
• pp.363-377
• /
• 2022

Purpose: This study aimed to test a hypothetical model of Korean nurses' patient safety management activities using meta-analytic path analysis. Methods: A systematic review, meta-analysis, and meta-analytic path analysis were conducted following the PRISMA and MOOSE guidelines. Seventy-four studies for the meta-analysis and 92 for the meta-analytic path analysis were included. The R software program (Version 3.6.3) was used for data analysis. Results: Four variables out of 49 relevant variables were selected in the meta-analysis. These four variables showed large effect sizes (ESr = .54) or median effect sizes (ESr = .33~.40) with the highest k (number of studies) in the individual, job, and organizational categories. The hypothetical model for the meta-analytic path analysis was established using these variables and patient safety management activities. Twelve hypothetical paths were set and tested. Finally, the perception of the importance of patient safety management and patient safety competency directly affected patient safety management activities. In addition, self-efficacy, the perception of the importance of patient safety management, patient safety competency, and patient safety culture, indirectly affected patient safety management activities. Conclusion: Self-efficacy, the perception of the importance of patient safety management, patient safety competency, and the organization's patient safety culture should be enhanced to improve nurses' patient safety management activities.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.605-610
• /
• 2002

The purpose of this study is to develop an analytic model which can describe the behavior or concrete compressive member strengthened by CFS(Carbon Fiber Sheet) with various cross-sectional shapes such as circular. square, and octagonal and various laminate angles. The failure criterion of laminated CFS is based on Tsai-Wu failure criterion. The stress strain model of confined concrete compressive member is based on an equation proposed by Mander. The effective lateral confining pressure is considered and modified according to various cross-sectional shapes. Octagonal cross-section shows the best results in the aspect of ductility, while circular does in compressive strengthening effects. In addition, [0/0/0/0] laminate in which the direction of fiber is parallel to the direction of principal stress shows the superior strength and ductility than other laminates. The analytic results show that strength and ductility of the analytic model depend on the cross-sectional shapes as well as the laminate angles.