• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.127-133
• /
• 1990

In this article, several problems inherent in histogram estimate of unknown probability density function are discussed. Those include so called sharp comers and bin edge effect. A resolution for these problems occurred with histogram is discussed. The resulting estimate is called kernel density estimate which is most widely used by data analysts. One of the most recent and reliable data-based choices of scale factor (bandwidth) of the estimate, which has been known to be most crucial, is also discussed.

• IE interfaces
• /
• v.7 no.1
• /
• pp.81-91
• /
• 1994

Simulation is one of the most widely used techniques in operations research and management science, but there are several impediments to even wider acceptance and use of simulation. One of the more significant limitations is the dependence of simulation on statistical methodology. This research identifies eighteen different statistical issues in simulation methodology and develops an expert system which could through interactive dialog with simulation analysts offer advice on statistical approaches which might be used to deal with particular issues and to accomplish required statistical computations. This research revises the previous study published in Simulation by incorporating additional statistical issues in the expert system to enhance its performance in analyzing a given simulation problem with statistical methodologies. An overview of the revised system is given and illustrations of the capabilities of the system are presented.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.183-187
• /
• 1997

Organophosphate pesticides were extracted with 70% acetone and then transferred to dichloromethane. Extracts were applied to open-column chromatography with florisil. The florial extract was analyzed by gas chromatography with nitrogen-phosphorus detector(GC/NPD). Recoveries of the 18 organophosphate pesticides were ranged from 88.7% to 100. 0% for the narrow-bore capillary GC(Ultra-21. The minimum detectable level of this analytical method was 0.019 - 0.035 mg/kg. Sample throughput(extraction, open-column chro- matography, and GC analysts) was decreased considerably (8h per sample).

• Journal of Korean Society for Quality Management
• /
• v.28 no.3
• /
• pp.82-90
• /
• 2000

MBNQA(Malcolm Baldrige National Quality Award) was established in 1987 in order to promote the spread of TQM in U.S. Likewise, JQA(Japanese Quality Award) was set up in 1995 in order to upgrade the level of TQM activities in Japan. MBNQA and JQA are quite the same in their basic concepts, values, and the process of the examination, but they differ in the contents of the criteria. The objective of this study is to Identify the differences between MBNQA and JQA in terms of strategy planning category, Therefore, in this paper, strategy planning category is analyzed, especially its theoretical validity is examined by literature review. The major differences are as follows: JQA emphasizes strongly the evaluation process than MBNQA by requiring the measuring of the level of strategic achievement. On the other hand, in MBNQA, strategic objectives must be estimated by decision analysts techniques, scenario tools, and other statistical methodologies.

• Journal of the Korean Statistical Society
• /
• v.28 no.3
• /
• pp.311-324
• /
• 1999

The problem of 'outliers', observations which look suspicious in some way, has long been one of the most concern in the statistical structure to experimenters and data analysts. We propose a model for an outlier problem and also analyze it in linear regression model using a Bayesian approach. Then we use the mean-shift model and SSVS(George and McCulloch, 1993)'s idea which is based on the data augmentation method. The advantage of proposed method is to find a subset of data which is most suspicious in the given model by the posterior probability. The MCMC method(Gibbs sampler) can be used to overcome the complicated Bayesian computation. Finally, a proposed method is applied to a simulated data and a real data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.144-149
• /
• 2006

최근 저소음형 fan 의 도입과 컴퓨터 케이스의 설계 변경 등으로 컴퓨터 소음이 저감되어, HDD 나 CD/DVD-ROM 등에서 발생하는 협대역 소음들이 문제가 되기도 한다. 특히 HDD 의 소음은 회전 속도의 증가와 휴대용 컴퓨터나 외장 HDD와 같이 사용자에 근접한 환경에서 사용되는 빈도가 높아짐에 따라 소음제어에 대한 관심이 증가되고 있다. 본 연구에서는 HDD 소음 분석 및 제어에 적합한 방법론 정립을 위한 음향/진동 분석이 수행되였다. 먼저 음압과 음향 파워, 진동속도를 측정하여 각 면의 기여도와 문제가 되는 주파수 대역을 선정하여 그 원인이 무엇인지를 실험적으로 찾아내고, 소음저감을 발안을 제시하였다. 이러한 개선 방안들은 실험적인 방법으로 검증되었으며, 음향 진동 분석을 통한 소음원 파악 및 적절한 개선 방향의 설정은 향후 HDD 설계시 유용한 정보로 활용될 수 있을 것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.39-44
• /
• 1997

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is under way for the purpose identifying, evaluating, and compiling benchmark critical experiment data into a standardized format that allows criticality analysts to easily use the data to validate calculational methods and cross sections. As part of this activity, PNL30-35 experiments, which had been adopted as benchmark problems by CSEWG in 1970s, were reevaluated, which results in some additions and modifications: changes in fuel number density, modification to the experimental keff, modifications to the soluble boron concentration for PNL-31, and addition of an uncertainty in the benchmark-model k$_{eff}$./.

• Agricultural and Biosystems Engineering
• /
• v.1 no.1
• /
• pp.59-62
• /
• 2000

After ten years of implementing the agricultural automation program in Taiwan, some positive effects and satisfactory results have been recognized by both the agricultural industry and local administrative bureaux. The automation of agriculture is a response to sophisticated demands for production and quality in countries with high labor costs. The development of sensor systems, control systems, precision agriculture systems, and engineering for plant culture systems will determine the degree of automation used for crop production in the 21st century. The engineering system will capitalize upon expertise from physiologists, pathologists, systems analysts, agronomists, horticulturists, computer programmers, economists, crop producers and managers in order to efficiently implement automated crop production.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2130-2131
• /
• 2011

Electric fire breaks out by various causes such as electric short, overload(over current), leakage current, poor contact, static electricity, insulation deterioration, partial disconnection and etc. In this paper, we studied analysis technique for scientific and systematic judgment for distinction of electricity fire existence and nonexistence, and described about electricity fire cause analysis process for collecting physical evidences. We handled external form analysis, Substance extension analysis, X-ray transmission analysis, cross-section analysis, thermal analysis, chemical structure analysis, surface structure analysis, component analysis, electrical properties analysis, and circuit analysis by analysis technique for electricity fire cause judgment. We expect that analysis technic elevation and correct cause of fire analysis of scene of a fire investigators and analysts through this paper which see help.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.10-12
• /
• 2003

Since building large-scale software is usually bi9 burden to most developers, it has been an important issue for many researchers. In this paper, we suggest a mechanism that can be used to support such large-scale development. Through composition rules via subtyping within Statecharts, incremental construction of software can be achieved. Among the composition rules (i.e. delegation rule and mixin rule), we mainly focus on the delegation rule in our work. Not only we can check the subtype property. but also can verify the behavior compatibility of composite results that are available by composition rules. This new mechanism is helpful for analysts as well as designers, and it can be used as a guideline for incremental and compatible construction of component based software.