• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.401-412
• /
• 1998

The aim of this study was to measure the regional micro-shear bond strength of dentin bonding agents to dentin, and to investigate the relationship between the micro-shear bond strength and two dentinal characteristics ; Vickers hardness and remaining dentin thickness. Twenty-four freshly extracted, noncarious human molars were selected for this study. The materials tested in this study consisted of two commercially available dentin bonding agents (MAC-BOND, ONE-STEP) and two restorative light-cured composite resins (AELITEFIL, Z100). The occlusal or side surface of tooth crown was sectioned to expose dentin, and the exposed surface was finally polished with # 600 sandpaper. Four groups of application methods were used combining the filling materials and the dentin bonding agents. The composite resin-attached tooth specimens were embeded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of 1mm $\times$ 1mm. Nine specimens were obtained from each tooth. The cut specimens were divided into three groups depending on the position of the dentin bonding surface. The micro-shear bond strength, remaining dentin thickness, and dentinal hardness were measured. Experimental results were then statistically analyzed with ANOVA. t-test, Scheffe test, and regression analysis. From this experiment, the following results were obtained : 1. In the case of occlusal surface bonding, the pooled micro-shear bond strength of ONST-AELIT group (16.62 MPa) was significantly higher than that of MACB-AELIT group (9.91 MPa) (p<0.05). However, there was no significant difference in the micro-shear bond strength depending on the dentin position (p>0.05). 2. In the case of side surface bonding of crown, the pooled micro-shear bond strength of four different bonding groups was not significantly different among each other (p>0.05). However, in three of the test groups (ONST-AELIT, MACB-Z100, ONST-Z100), the micro-shear bond strength to the lower 1/3(III) position was significantly lower than that to middle 1/3(II) position of surface (p<0.05). 3. In the ONST-AELIT bonding group, the pooled micro-shear bond strength to the occlusal surface was significantly lower than that to the side surface of crown (p<0.05). 4. There was no significant correlation between the micro-shear bond strength and dentin hardness / remaining dentin thickness (p>0.05).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2012

This paper aimed at the development of a unified wireless control system in order to control various forms of vibration of bridges. This unified wireless control system unified all different systems each of which functioned for difference purpose such as measurement, analysis, judgement, and control of data acquired from the movement of structure. It was designed to control structures with feedback which was returned according to each different situation after analyzing various signals measured about the structure. In this system, every information in each step from measurement to control was wirelessly transmitted to its central system so that a manager was able to effectively monitor the whole process. Just for the case when any system control need to intervene occurred, a graph user interface was designed for better access. In order to evaluate its basic performance, an experiment was carried out to see how signal input and output were done by comparing its results with those of a wired system. On the basis of the experiment, a vibration control experiment was performed on a model of cable-stayed bridge to see if the unified wireless control system worked well in realtime. This was carried out under four conditions, and the graph and quantitative result under each condition were compared each other. All experiments proved that the unified wireless control system functioned as well as the wired one in terms of its basic performance and vibration control.

• Journal of Distribution Science
• /
• v.4 no.2
• /
• pp.21-40
• /
• 2006

Small and middle sized Franchise system channels experience conflicts because of constant interaction between franchiser and franchisee. However, it is rarely that attempt has been made to identify causes of conflicts in distribution of franchise industry. The purpose of this study was to explore cause of conflicts from the franchisee. For the study, data were collected from the owner or the shop-manager with a contractor in franchise systems. By means of in-depth interviews with multiple informants, their statement was analyzed qualitatively. From analysis of the resulting data, the causes of conflicts were associated with two broad sets, attitudinal and structural differences between franchisers and franchisees. First, attitudinal sources of conflict were identified as perception of subordinated relationships between channel members, delayed announcement on order changes, difficulties in communication by doing irresponsible behavior, different expectations between channel members in market territory and lack of consistent-supporting. Second, structural sources of conflict involved unilateral decision on interior, payment method, unreasonable delivery issue, treat franchisee with discrimination by the sales, in controlling against free management. There are limitations on generalization due to the results based on interview, but this study will be a useful exploratory step before designing a large scale survey.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.15-22
• /
• 2003

Seismic design codes developed taking into account the strong earthquakes may result in unnecessary economical loss in the low seismic area, and the importance of the performance based design considering the soil-structure interaction is recognized for the reasonable seismic design. In this study. elastic and inelastic seismic response analyses of a single degree of freedom system on the soft soil layer were performed considering the nonlinearity of the soil for the 1 weak earthquakes scaled to the nominal peak accelerations of 0.07g and 0.11g. The seismic response analyses were performed in one step applying the earthquake motions to the bedrock, utilizing a pseudo 3-D dynamic analysis software of the soil-structure system. The study results indicated that seismic response spectra of a system assuming the rigid base or the linear soil layer does not represent the true behavior of a structure-soil system, and it is necessary to take into account the nonlinear soil-structure interaction effects and to perform the performance based seismic design for the various soil layers, having different characteristics, rather than to follow the routine design procedures specified in the design codes for the reasonable seismic design. The nonlinearity of the soft soil excited with the weak seismic motions also affected significantly on the elastic and inelastic seismic response spectra of a system due to the nonlinear soil amplification of the earthquake motions, and it was pronounced especially for the elastic response spectra.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.641-645
• /
• 2005

Using aqueous solution of 60% ethanol, the isoflavones contained in the Soybean (Chungsun, Korea), Tawon (Suwon, Korea), Jackbean (Hongsung, Korea), Soybean (Jilin, China), Black Soybean (Jilin, China), Kidneybean (Jilin, China) and Soybean (California, U.S.A.) were extracted. In this work, the pretreatment step was composed of agitation extraction, filtration, concentration, ultracentrifuge, and membrane filtration. The analysis by $C_{18}$ column was performed, and the mobile phase applied was linearly changed with A/B of 85/15-65/35 vol% for 50 min (A water/acetic acid, 99.9/0.1 vol%, B acetonitrile/acetic acid, 99.9/0.1 vol%). Among the soybeans tested, the total amounts of the four isoflavones (daidzin, genistin, daidzein, and genistein) extracted by the soybeans from Korea, China and U.S.A. were 1.37, 1.60, and 2.25 mg/g, respectively. It was also found that the total amount of aglycone of daidzein and genistein from soybean (American California) was $144{\mu}g/g$, which was the largest for the soybeans experimented.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.67-75
• /
• 2016

This paper investigates how artificial individuals with behavioral memory circuits adaptively evolve with respect to given environments on a cell-level simulation framework simulating artificial individuals. This makes it possible for us to analyse the advantages of artificial individuals with behavioral memory circuits against the simple artificial individuals that can do only simple reactions with respect to the environments and to know which advanced reactions are possible. In order to do this analysis, we experimented various tests on a specific prey pattern and examined the results. As a first experiment, we tested that artificial individuals with four memory steps competed against from those without memory step to those with three memory steps. Experimental results showed that the artificial individuals with four memory steps were superior to most others. However, artificial individuals with two memory steps were better than those with four memory steps. This was caused that the artificial individuals with two memory steps could evolve faster than those of four memory steps. In a second experiment that all types of artificial individuals are simultaneously evolved, the artificial individuals with two memory steps also showed the best result in the experiment. We could conclude that the artificial individuals with memory was better than those without memory and the best memory steps of artificial individuals were depended on the complexity of prey patterns.

• 재활복지
• /
• v.21 no.1
• /
• pp.253-277
• /
• 2017

The purpose of this study was to develop the Constraints in Physical Activity Scale for people with physical Disabilities(CPASD) which measures the constraints in physical activity of people with physical disabilities. For this study, the 5 step analytic framework of unified validity developed by Messick (1995), the framework for conducting a strong program of construct validation by Benson (1998) method were applied. Furthermore, the validity of CPASD was systematically presented by applying common factor model and measurement model to 264 persons with physical disabilities. The conclusion based on the results and discussions of this study is as follows. First, CPASD presented evidence of job validity. Four factors (17 items) were developed, consisting of leader constraints, economic constraints, prejudice, and exercise environment constraints through the analysis of the factor structure and the fit of factor coefficients. Second, the factor structure of the developed CPASD (leader constraint, economic constraint, prejudice, exercise environment constraint) was statistically distinguished and stably reflected the existing exercise participation constraints theory. Third, the developed CPASD presented evidence of the validity of the criteria. Leader constraints and prejudice were negatively correlated with positive motor emotions, leader constraints, prejudice, and exercise environment constraints were positively correlated with negative motor emotions. Therefore, in future research, it is necessary to reevaluate the current system and actual condition related to leader constraints, economic constraints, prejudices, and exercise environment constraints derived as factors of CPASD. To do this, it is necessary to judge the degree of reality based on the causal relationship verification and IRT theory using CPASD.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.256-262
• /
• 2012

This study investigated the hydrogen storage properties of Zr-Based $AB_{2-x}M_x$ metal hybride made by HCS (Hydriding Combustion Synthesis). The materials were prepared by HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm, HCS 80 wt% $AB_2$-20 wt% Mg and pure Zr-Based $AB_2$, These materials were activated at 298 K under 20 bar. Both HCS 80 wt% $AB_2$-20 wt% Mg and HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm were absorbed within 1 minute. In the case of the $AB_2$, it was perfectly absorbed within 6 minutes. Then, the materials were evaluated to obtain P-C-T (Pressure-Composition-Temperature) curves at 298K. As a result, the hydrogen storage capacity of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were determined to be 1.2, 1.6 and 1.74 wt%, respectively. The activation energy and rate controlling step were calculated by the Johnson-Mehl Avrami equation. The activation energies of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were 26.91, 20.45, and 60.41 kJ/mol, respectively. Also, the values of ${\eta}$ in the Johnson-Mehl Avrami equation for HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ are 0.60, 0.51, and 0.44. So, the rate controlling steps which indicate hydrogen storage mechanism are an one dimensional diffusion process.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.252-260
• /
• 2009

Rice is the most important cereal crop not only in supplying the basic staple food for more than half of the world's population but also as a model plant for functional genomic studies of monocotyledons. Although rice transformation method using A. tumefaciens has already been widely used to generate transgenic plants, the transformation rate is still low in most Korean elite cultivars. We made several modifications of the standard protocol especially in the co-cultivation step to improve the efficiency of the rice transformation. The co-culture medium was modified by the addition of three antioxidant compounds (10.5 mg/L L-cysteine, 1 mM sodium thiosulfate, 1 mM dithiothreitol) and of Agrobacterium growth-inhibiting agent (5 mg/L silver nitrate). Co-cultivation temperature ($23.5^{\circ}C$ for 1 day, $26.5^{\circ}C$ for 6 days) and duration (7 days) were also changed. The plasmid of pMJC-GB-GUS carrying the GUS reporter gene and the bar gene as the selectable marker was used to evaluate the efficiency of the transformation. After co-cultivation, a high level of GUS gene expression was observed in calli treated with the modified method. It is likely that those newly added compounds helped to minimize the damage due to oxidative bursts during plant cell-Agrobacterium interaction and to prevent necrosis of rice cells. And the transformation rate under the modified method was also remarkably increased approximately 8-fold in Heungnambyeo and 2-fold in Ilmibyeo as compared to the corresponding standard method. Furthermore, we could produce the transgenic plants stably from Ilpumbyeo which is a high-quality rice but its transformation rate is extremely low. Transformation and the copy number of transgenes were confirmed by PCR, bar strip and Southern blot analysis. The improved method would attribute reducing the effort and the time required to produce a large number of transgenic rice plants.

• Korean Journal of Remote Sensing
• /
• v.15 no.1
• /
• pp.9-20
• /
• 1999

The use of climatic information is essential in the industial society. More specialized weather servies are required to perform better industrial acivities including agriculture. Especially, crop models require daily weather data of crop growing area or cropping zones, where routine weather observations are rare. Estimates of the spatial distribution of daily climates might complement the low density of standard weather observation stations. This study was conducted to estimate the spatial distribution of daily minimum and maximum temperatures in Korean Peninsula. A topoclimatological technique was first applied to produce reasonable estimates of monthly climatic normals based on 1km $\times$ 1km grid cell over study area. Harmonic analysis method was then adopted to convert the monthly climatic normals into daily climatic normals. The daily temperatures for each grid cell were derived from a spatial interpolation procedure based on inverse-distance weighting of the observed deviation from the climatic normals at the nearest 4 standard weather stations. Data collected from more than 300 automatic weather systems were then used to validate the final estimates on several dates in 1997. Final step to confirm accuracy of the estimated temperature fields was comparing the distribution pattern with the brightness temperature fields derived from NOAA/AVHRR. Results show that differences between the estimated and the observed temperatures at 20 randomly selected automatic weather systems(AWS) range from -3.$0^{\circ}C$ to + 2.5$^{\circ}C$ in daily maximum, and from -1.8$^{\circ}C$ to + 2.2$^{\circ}C$ in daily minimum temperature. The estimation errors, RMSE, calculated from the data collected at about 300 AWS range from $1.5^{\circ}C$ to 2.5$^{\circ}C$ for daily maximum/minimum temperatures.