• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.13-21
• /
• 2019

A method was developed for the simultaneous detection of an antibiotic fungicide, streptomycin, and its metabolite (dihydrostreptomycin) in agricultural products using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted using methanol adjusted to pH 3 using formic acid, and purified with a HLB (Hydrophilic lipophilic balance) cartridge. The matrix-matched calibration curves were constructed using seven concentration levels, from 0.001 to 0.1 mg/kg, and linearity of five agricultural products (hulled rice, potato, soybean, mandarin, green pepper), with coefficients of determination $(R^2){\geq}0.9906$, for streptomycin and dihydrostreptomycin. The mean recoveries at three fortification levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n = 5) were from 72.0~116.5% and from 72.1~116.0%, and relative standard deviations were less than 12.3% and 12.5%, respectively. The limits of quantification (LOQ) were 0.01 mg/kg, which are satisfactory for quantification levels corresponding with the Positive List System. All optimized results satisfied the criteria ranges requested in the Codex guidelines and the Food Safety Evaluation Department guidelines. The present study could serve as a reference for the establishment of maximum residue limits and be used as basic data for detection of streptomycin and dihydrostreptomycin in food.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1897-1909
• /
• 2009

This large-scale research project contributes to the theory development in the importance of clothing to the self and in the way that older persons might age successfully by fulfilling the need for self-actualization by incorporating a primary resource environment, such as clothing into their self-system. This paper presents one research objective from a lager project that explores the correlations among the Proximity of Clothing to Self (PCS), age identity (subjective or perceived age), and self-actualization (the highest level of human needs). A mail survey design was applied to this study. In November 2004, two questionnaires, Clothing: A Resource for Successful Aging? (to measure PCS, age identity, and demographic variables) and Personal Orientation Inventory (to measure self-actualization), were sent to 1,700 older persons in the U.S. and 195 completed usable questionnaires were returned (12% response rate). This research discovered that the age identity of older persons did not relate with PCS except for those 85 years and over. There were negative correlations among subscales of PCS and self-actualization. This result can be interpreted as that an older person who has not met the highest level of needs yet, can use clothing as a facilitator or need satisfier to meet a higher level of Self-Actualization (SA). Correlation analyses also revealed that older persons in the age category of 75 to 84 years were different from those in the category of 65 to 74 years and 85 years and over. This result implies that older persons in this age category are undergoing more psychological transitions than those in other categories. Further research is necessary to explore the relationship of several SA subscales with various clothing variables such as clothing interest, clothing involvement, or clothing satisfaction.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.277-282
• /
• 2010

The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.

• Journal of Life Science
• /
• v.26 no.2
• /
• pp.190-197
• /
• 2016

Aflatoxin M₁ can be produced in cow’s milk when cows eat contaminated produce. Milk is a major source of food for infants and for children who have a weak level of immunity, and the detection of Aflatoxin M₁ for risk assessment is necessary in order to reduce the amount of it in milk. In this study, the Aflatoxin M₁ level was monitored for one year in raw milk samples obtained from Chungnam Province, Korea. The milk samples were divided into three categories: 1. milk samples from a standard general farm, 2. milk samples from a HACCP controlled farm, and 3. milk samples from the supply of Aflatoxin M₁ reduced fodder. The average concentrations of Aflatoxin M₁ in milk were 0.023±0.005 ug/l for the standard general farm, 0.017±0.004 ug/l for the HACCP controlled farm, and 0.013±0.003 ug/l for the supply of Aflatoxin M₁ reduction fodder. Milk collected from the supply of Aflatoxin M₁ reduction fodder had the lowest level of Aflatoxin M₁. However, when efficiency and economic aspects are considered the most effective way of reducting Aflatoxin M₁, could be taking milk from the HACCP controlled farm and implementing good feed management. Institutional support from the government, careful management of dairy farming, and a strict farm sanitation program are required in order to lower the level of Aflatoxin M₁ in milk.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.57-69
• /
• 2023

The objectives of this study were to analyze the fish community structures and distribution characteristics of fisheries resources in the Osip Stream and Wangpi Stream, fishery resources protection areas. For the study, we conducted fish samplings four times in the two streams from April to October 2019. In Osip Stream and Wangpi Stream, we sampled 31 species and 29 species and the dominant species were Zacco platypus (28.6%) and Squalidus multimaculatus(41.7%), respectively. According to the life type of fish species, primary freshwater species were collected 18 species(58.1%) and 21 species(72.4%), and migration fishes were sampled 4 species (12.9%) and 6 species (20.7%) in Osip Stream and Wangpi Stream, respectively. Fisheries resources species showed high relative abundance in June, and the fish biomass was highest in October. As a results of comparing the previous studies with this study, both rivers showed high biodiversity and were found to maintain stable populations of fishes. According to analysis of tolerance guilds, the proportion of tolerant species, based on the number of individuals, was composed of 14.4% and 1.1% in Osip Stream and Wangpi Stream, respectively. This very low ratio of tolerant species confirmed that both streams have very good physiochemical environment conditions. From the above results, it was judged that the fishery resource protection areas of Osip Stream and Wangpi Stream have high ecological function and preservation value. For sustainable use and management of fishery resource protection areas of Osip Stream and Wangpi Stream, it is suggested that biological disturbance management, fish discharge projects considering environmental capacity, efforts to improve the habitat environment, and establishing a fishery resource protection areas management system were necessary as considerations.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.933-948
• /
• 2023

Atmospheric aerosols not only have adverse effects on human health but also exert direct and indirect impacts on the climate system. Consequently, it is imperative to comprehend the characteristics and spatiotemporal distribution of aerosols. Numerous research endeavors have been undertaken to monitor aerosols, predominantly through the retrieval of aerosol optical depth (AOD) via satellite-based observations. Nonetheless, this approach primarily relies on a look-up table-based inversion algorithm, characterized by computationally intensive operations and associated uncertainties. In this study, a novel high-resolution AOD direct retrieval algorithm, leveraging machine learning, was developed using top-of-atmosphere reflectance data derived from the Geostationary Ocean Color Imager-II (GOCI-II), in conjunction with their differences from the past 30-day minimum reflectance, and meteorological variables from numerical models. The Light Gradient Boosting Machine (LGBM) technique was harnessed, and the resultant estimates underwent rigorous validation encompassing random, temporal, and spatial N-fold cross-validation (CV) using ground-based observation data from Aerosol Robotic Network (AERONET) AOD. The three CV results consistently demonstrated robust performance, yielding R²=0.70-0.80, RMSE=0.08-0.09, and within the expected error (EE) of 75.2-85.1%. The Shapley Additive exPlanations(SHAP) analysis confirmed the substantial influence of reflectance-related variables on AOD estimation. A comprehensive examination of the spatiotemporal distribution of AOD in Seoul and Ulsan revealed that the developed LGBM model yielded results that are in close concordance with AERONET AOD over time, thereby confirming its suitability for AOD retrieval at high spatiotemporal resolution (i.e., hourly, 250 m). Furthermore, upon comparing data coverage, it was ascertained that the LGBM model enhanced data retrieval frequency by approximately 8.8% in comparison to the GOCI-II L2 AOD products, ameliorating issues associated with excessive masking over very illuminated surfaces that are often encountered in physics-based AOD retrieval processes.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.87-106
• /
• 2005

In order to evaluate the mechanism of transmission as well as processing of sensory information originating from low-threshold mechanoreceptor in oral and maxillofacial region at primary synaptic region of trigeminal nervous system, vibrissa afferent fibers of adult cat were labeled with intra-axonal HRP injection. Serial sections containing labeled boutons were obtained from the piece of trigeminal interpolar nucleus. Under electron microscope, total 30 labeled boutons were observed, and ultrastructural characteristics, frequency of occurence, synaptic organizations of vibrissa afferent terminals were analysed. The results were as follows: 1. Labeled boutons contained clear, spherical synaptic vesicles with diameter of 45$\sim$55nm. They formed asymmetrical synapse with dendrites showing definite postsynaptic density, larger synaptic cleft, multiple synaptic structures at various regions. With unlabeled axon terminals(p-ending) containing polymorphic synaptic vesicles, they formed symmetrical synapse showing indefinite postsynaptic density and narrower synaptic area. 2. Each labeled bouton formed 1 to 15 synapses, the average of 4.77$\pm$3.37 contacts per labeled bouton, with adjacent neuronal profiles. Relatively complex synaptic organization, which formed synapses with more than 5 neuronal profiles, was observed in a large number(46.7%, n=14) of labeled boutons. 3. Axo-somatic synapse was not observed. The number of axo-dendritic synapse was 1.83$\pm$1.37 per labeled bouton. Majority(85.0%) of axo-dendritic synapses were formed with dendritic shafts, nonprimary dendrites(n=47, 1.57$\pm$1.38/1 bouton), however, synapses formed with primary dendrites(n=6, 0.20$\pm$0.41/1 bouton) or dendritic spines(n=2, 0.07$\pm$0.25/1 bouton) were rare. 4. 76.7%(n=23) of labeled boutons formed axo-axonic synapse (2.93$\pm$2.36/1 bouton) with p-endings containing pleomorphic vesicles. Synaptic triad, in which p-endings formed synapses with labeled boutons and dendrites adjacent to the labeled boutons simultaneoulsy, were also observed in 60.0%(n=18) of labeled boutons. From the above results, vibrissa afferent terminals of adult cat showed distinctive synaptic organization in the trigeminal interpolar nucleus, thus, suggests their correlation with the function of the trigeminal interpolaris nucleus, which participates in processing of complex sensory information such as two-point discrimination and motivational-affective action. Further studies on physiologic functions such as quantitative analysis on ultrastructures of afferent terminals and nerve transmitters participating in presynaptic inhibition are required.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.103-134
• /
• 2011

The recent economic recession and price rise reduces excessive consumption as a whole. So companies take more interest in and use discount coupons as a means of sales promotion to reinforce their competitiveness. The combination of Internet and mobile communication technology leads to an explosive increase in the use of mobile Internet service, which promotes commercialization of mobile coupons. Nevertheless, there are absolutely insufficient researches on mobile coupons than those on paper ones. In this context, this study tries to consider intention of accepting and using mobile coupons. The innovated Technology Acceptance Model (TAM) was used to see factors of using mobile coupons considered important by customers. Through the combination of characteristics of mobile coupon service and values obtained from mobile coupons, effects of variables to enhance intention of using mobile coupons were empirically analyzed. In particular, this study suggested importance of psychological as well as economic values of mobile coupons and emphasized good considerations of the psychological aspect, such as shame, stinginess, and reputation sensitivity, in using mobile coupons as an important factor for intention of using the coupons. Another empirical analysis was made of what moderating roles consumers' self-construalplayed in the effects of mobile coupon values perceived by consumers on intention of using coupons. As a result, immediate connectivity and situational provision among characteristics of mobile coupon service were found to affect ease and usability. It was also shown that perceived ease and usability had significant effects on both economic and psychological values, which then had significant effects on intention of using a mobile system. After testing moderating effects of self-construal, the degree of effects of perceived mobile coupon values on intention of using mobile coupons was greater among inter-dependent self-construal users than among independent ones. This study considered various schemes of improving intention to use mobile coupons and provided a foundation to help companies make a strategy for mobile coupons to be activated in the future.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.183-188
• /
• 2005

Effects of co-solvent polarity, citric acid, pressure, temperature, run time, and co-solvent ratio on extraction of major flavonoids from Lonicera Flos were investigated using supercritical fluid $CO_{2}(SF-CO_{2})$. HPLC analysis revealed addition of pure methanol resulted in low extraction yield of major flavonoids, luteoloin (Lu), Quercetin (Qu), Apigenin (Ap). Under same condition, as co-solvent polarity increased, yields of major flavonoids increased gradually, At optimum co-solvent extraction condirion of 60% aqueous methanol (10%, v/v), yields of Lu, Qu, and Ap were 42.09, 28.18, and 3.49 mg/100 g, respectively. Addition of citric acid to 60% aqueous methanol gave higher, with addition of 1% citrie acid resulting in highest yields of 63.2 (Lu), 39.35 (Qu), and 5.79 (Ap) mg/100 g. Optimum extraction conditions of major flavonoids were 200 bar, $50^{\circ}C$, 60 min, and $CO_{2}$-methanol-water(20: 1.8: 1.2).