• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.211-224
• /
• 1989

10. Three major factors, freeness, filler and blend ratio that exercised considerable influence on physical properties of cigarette papers were chosen for the sake of their optimization at this experiment. An optimization of those above factors in paper manufacturing was investigated using response surface analysis. Optimum beating degree for Kenaf, Flax and NBKP showed around 72。SR, 68。SR and 85 SR, respectively, in considering of five quality index such as porosity, tensile strength, stretch, whiteness and opacity. The best blending ration of reciprocal pulps treated under optimum beating degree were diversified and combination scope of the bast fiber (Kenaf, Flax) to the NBKP was range from 30% to 65% in case of the Kenaf, from 25 to 40% in Flax at the same receipe. The optimum range of calcium carbonate content revealed 25%~30% in Kenaf mixed NBKP and 24%~31% in Flax mixed NBKP.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.52-64
• /
• 1993

There exist many frame structural systems having some attachments reducible to damped spring-mass systems, concentracted masses and spring supports. For free and forced vibration analyses of such a system an analytical method based on the receptance method is presented. A framed structure having attachments is considered as a combined system composed of various Timoshenko beam and bar elements and the attachments. So, the vibration characteristics of the system are calculated by synthesizing receptances and Support Displacement Transfer Ratio (SDTR) of beam and bar elements In spectral and/or closed forms, and receptances of the attachments. In forced vibration analysis, arbitrary excitation forces at a point on the structure and displacement excitations at boundaries are considered. Numerical investigations are carried out for verification of the presented method, and the results show good accuracy and very high computational efficiency.

• The Research Journal of the Costume Culture
• /
• v.29 no.4
• /
• pp.538-553
• /
• 2021

As interest in the sustainable fashion industry continues to increase along with climate issues, it is necessary to identify research trends in sustainable fashion and seek new development directions. Therefore, this study aims to analyze research trends on sustainable fashion. For this purpose, related papers were collected from the KCI (Korean Citation Index) and Scopus, and 340 articles were used for the study. The collected data went through data transformation, data preprocessing, topic modeling analysis, core topic derivation, and visualization through a Python algorithm. A total of eight topics were obtained from the comprehensive analysis: consumer clothing consumption behavior and environment, upcycle product development, product types by environmental approach, ESG business activities, materials and material development, process-based approach, lifestyle and consumer experience, and brand strategy. Topics were related to consumption, production, and education of sustainable fashion, respectively. KCI analysis results and Scopus analysis results derived eight topics but showed differences from the comprehensive analysis results. This study provides primary data for exploring various themes of sustainable fashion. It is significant in that the data were analyzed based on probability using a research method that excluded the subjective value of the researcher. It is recommended that follow-up studies be conducted to examine social trends.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.253-257
• /
• 2001

This study reveals the sheet metal working with multi-forming type ultra precision process. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming ultra precision progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. This part I of papers related to the analysis of production part and strip process layout design through the metal forming simulation by DEFORM and IDEAS.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.359-362
• /
• 1988

In this papers, in order to decreased the ZnO varistor breakdown voltage, additives the $TiO_2$ with ZnO varistors. The effects of addition $TiO_2$ with ZnO varistor are discussed. Observation of ZnO varistor microstructures are photospectroscopy and SEM, and variation of phase are XRD analysis. Experimental results, the more increased the $TiO_2$ contents the more decreased the mean grain size of ZnO. Also, results of XRD analysis, the more increased the $TiO_2$ contents the more increased the spinel structures.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.137-146
• /
• 2004

This is the second of two companion papers concerned with the analysis and design of a pneumatic vibration isolation system. The properties of the system are clarified by observation of the transmissibility surface calculated by the models and algorithm developed in the first paper of this research. It Is shown that the nonlinear model proposed in this research is more closer to experimental results than the linear model that have been used in previous studies. The design optimization of the major design variables that affect the performance of the system is achieved by using the condition for attenuation, disturbance rejection and maximum damping in resonance peak. The design space search method is adopted for the optimization of the orifice area. The models, transmissibility calculation algorithms and design optimization techniques developed in this research are shown to be greatly helpful to the optimal design of the pneumatic vibration isolation system by experiment.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.50-52
• /
• 2001

The BLDC(Brushless DC) motor with the permanent magnet has many merits such as high efficiency and efficiency. These characteristics of the BLDC motor makes them one of the most popular motors in the world today. The C type ferrite magnet is many used in BLDC motor for high performance, especilly low price. Many papers have been written on the analysis of the BLDC motor with C type ferrite magnet. But, most of these target models are contained symmetric distribution of permanent magnet. In this paper, investigations are made on different distribution of permanent magnets for a understanding of the effects of unequal permanent magnet location on the unbalanced cogging torque. Motor torque and cogging torque are obtained by using the 2 dimensional finite element method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.231-234
• /
• 2007

This paper presents an analysis method of transient ground impedance using the lightning impulse and variable frequency currents. The transient ground impedance strongly depends on the configuration and size of grounding electrodes and the shapes of impulse currents, and the inductance of grounding electrodes has a significant affect on the transient impedance of the grounding system. There are some differences between the effective impulse ground impedance which was introduced some papers and the transient ground impedance. The transient ground impedance measured from the peak value of impulse voltage and the peak value of impulse current is more reliable than the effective impulse ground impedance.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.33-43
• /
• 2008

This study intended to explore trends of furniture sold in general merchandise stores such as Lotte mart, E-mart, GSmart, Home ever, and Home plus, which are run by conglomerates in Korea. Through internet, related books and papers, interviews with the mart-related people, styles, items, prices, manufacturers, and materials of furniture well sold in the marts were researched and analyzed qualitatively. As the result of the analysis, the furniture expressed the scale to be able to put in the cart of the marts, knock-down and folding structure to be easy to disassemble, pack, and move, low prices below one hundred thousand won, the light materials like plastic, aluminum and the more MDF than hard wood. Each item was made of PB reflecting lower prices of 10 to 20 percentage for the consumer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.163-169
• /
• 2005

A theoretical formulation on the forced acoustic response of an enclosed cavity having a double air-gap resonator on one of boundary panels of the cavity is developed in the paper. The double gap resonator consists of two air-gaps and two partition sheets as in the author's previous papers. This paper reveals that the double gap resonator reduces the level of a target noise peak by splitting the peak as two small peaks, and that it is more effective when it is designed so that the upper gap thickness is larger than the lower gap thickness under the constraint that the entire gap thickness is fixed as a constant value. Finally, verification experiments show that the theoretical formulation and analysis results are valid by comparing theoretical results with experimental ones.