• Journal of the Economic Geographical Society of Korea
• /
• v.23 no.4
• /
• pp.408-424
• /
• 2020

This study attempts to analyze the spatial clustering of survived and closed coffee shops based on the land price and land use for each coffee shop location. The locational characteristics of survived and closed coffee shops for each cluster type are identified through various locational properties such as transport factors (physical accessibility), shop properties (franchise information, newly open/closed business experience), and spatial density (kernel density estimation). To this end, we categorize the clusters of survived and closed coffee shops into three types (general locational distribution type, commercialization type of residential area and location type of commercial center), and then analyze their locational characteristics. As the result, we found that the locations of newly open and closed coffee shops show different distribution characteristics, even though they are classified into the same type due to the double sidedness of new open and closed locations. The results of this study can be provided as basic data for planning the location of coffee shop as well as regional commercial district.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1556-1568
• /
• 2021

The plate-type fuel assembly adopted in nuclear research reactor suffers from complicated effect induced by non-uniform irradiation, which might affect stress conditions, mechanical behaviors and thermal-hydraulic performance of the fuel assembly. This paper is the Part II work of a two-part study devoted to analyzing the complex unique mechanical deformation and thermal-hydraulic characteristics for the typical plate-type fuel assembly under irradiation effect, which is on the basis of developed and verified numerical thermal-fluid-structure coupling methodology under irradiation in Part I of this work. The mechanical deformation, thermal-hydraulic performance and Mises stress have been analyzed for the typical plate-type fuel assembly consisting of support plates under non-uniform irradiation. It was interesting to observe that: the plate-type fuel assembly including the fuel plates and support plates tended to bend towards the location with maximum fission rate; the hot spots in the fuel foil appeared at the location with maximum thickness increment; the maximum Mises stress of fuel foil was located at the adjacent location with the maximum plate thickness increment et al.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.6
• /
• pp.505-510
• /
• 2013

An encircling send-receive type pulsed eddy current (PEC) probe is designed for use in aluminum tube inspection. When bare receive coils located away from the exciter were used, the peak time of the signal did not change although the distance from the exciter increased. This is because the magnetic flux from the exciter coil directly affects the receive coil signal. Therefore, in this work, both the exciter and the sensor coils were shielded in order to reduce the influence of direct flux from the exciter coil. Numerical simulation with the designed shielded encircling PEC probe showed the corresponding increase of the peak time as the sensor distance increased. Ferrite and carbon steel shields were compared and results of the ferrite shielding showed a slightly stronger peak value and a quicker peak time than those of the carbon steel shielding. Simulation results showed that the peak value increased as the defect size (such as depth and length) increased regardless of the sensor location. To decide a proper sensor location, the sensitivity of the peak value to defect size variation was investigated and found that the normalized peak value was more sensitive to defect size variation when the sensor was located closer to the exciter.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.34-39
• /
• 2014

This paper is aimed to prevent danger of electrical fire at cattle barn to detect resistive and capacitive leakage current component for wiring type and length. In order to analysis for electric leakage component for cattle barn sizes and normal buildings, this paper was studied field state investigation which are at cattle barn companies(10 companies) in Cheong-won location and normal buildings at Nam-bu market in Jeon-ju location. Market to deduce the problems of electric leakage component is analyzed. The resistive and capacitive leakage current component for wiring type and length is analyzed at Beon-young cattle barn. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in cattle barn. It is acceptable for electrical equipment use in an cattle barn.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.738-746
• /
• 1999

The performance of muffler can be improved for a frequency range of interest by moving inlet and outlet locations. And optimal location of inlet and outlet can be determined to improve the acoustic performance. The optimum design using FEM, however, may take a very long time and be very hard to take inlet and outlet locations as design variables. In this paper, the acoustic performance of reactive type single expansion chamber muffler is predicted using higher order mode theory. The sensitivity analysis of transmission loss with respect to the location of inlet and outlet is suggested. And the acoustic power transmission coefficient for a frequency of interest is used as cost function. Optimum location of inlet and outlet is determined to minimize cost function by using SUMT algorithm.

• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.2
• /
• pp.57-65
• /
• 1997

Thermal analysis has been performed to design a high-performance $LH_2$ vessel with about 1% per day evaporation loss. Analysis includes the combined insulations of MLI(Multi-Layer Insulation) and VCS (Vapor-Cooled Shield) under high vacuum. Combined insulation of MLI and VCS shows the existence of optimal location of VCS to minimize evaporation loss. Comparison of parallel-type DVCS (Double Vapor-Cooled Shield) and serial-type DVCS is also made to show the effectiveness of the system. The results indicate that the serial-type DVCS vessel is better than the parallel-type DVCS vessel with respect to overall evaporation loss. The combined insulation of SVCS (Single Vapor-Cooled Shield) with a partial MLI can give a similar performance characteristics compared to that with MLI and DVCS.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.98-112
• /
• 2007

The purpose of this study was to identify the differences in store evaluative criteria, clothing evaluative criteria, and purchasing behavior for casual wear among groups with different types of shopping orientation. Data were collected from 175 female and 169 male college students living in Beijing, and analysed by factor analysis, cluster analysis, ANDVA, Duncan test, crosstabulation analysis, and frequency analysis. Chinese college students were classified into four groups by their shopping orientations; fashion-pursuit type, individuality-pursuit type, practical type, and apathetic type. Significant differences were found in store evaluative criteria, clothing evaluative criteria, purchasing behaviors, and demographic characteristics. The fashion-pursuit type and individuality-pursuit type were more influenced by store location and service, product attributes, and fashion. They purchased more frequently and spent more money. Esthetic clothing evaluative criteria were considered more important by the individuality-pursuit type than the others, and symbolic clothing evaluative criteria by the fashion-pursuit type.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.507-523
• /
• 2019

This purpose of study was to Analysis on Location and Service Factors Affecting the Management and Use of Judo Gym. This study aims at providing fundamental data and information on Judo coach by studying what effects of location and use factor on trainee satisfaction. The survey was done through 350 copies and excluding 11 copies ran an analysis on the remaining 339(96.8%) copies. After question investigating the data which is collected used IBM SPSS statistics 21 program, frequency analysis, Exploratory factor analysis, Cronbach's ${\alpha}$, correlation analysis, multiple regression. The result of this study were as follows. First, management, location, coach, trainee value, facility, communication in Judo gym location and use factors showed (+) effects on trainee satisfaction. Second, Program operation, Gym quit use, Whether or not to insure in management factor showed (+) effects on trainee satisfaction. Third, Coach credibility in coach factor showed (+) effects on trainee satisfaction. Forth, Member communication in communication factor showed (+) effects on trainee satisfaction. Fifth, Wholesome leisure, Athletic ability improving in trainee value factor showed (+) effects on trainee satisfaction. Sixth, main facility level, additional facility level in facility factor showed (+) effects on trainee satisfaction. Seventh, Visibility in location factor showed (+) effects on trainee satisfaction. And location type(station area, residential district, commercial area) of Judo gym showed (+) effect on management, trainee value, location, communication, facility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.361-370
• /
• 2003

This paper attempts to improve the existing architecture of location register for location management in Private Network to Network Interface(PNNI)-based wireless ATM networks. Our approach enhances the hierarchical architecture of location registers based on a PNNI hierarchical architecture, which is referred to as the logical hierarchy architecture of location registers. This paper introduces a logical hierarchy architecture for location registers to reduce the cost of their location management. This logical hierarchy architecture of location registers begins with the lowest level physical location registers that are organized into clusters called logical groups. These logical groups are then represented in higher layers by logical nodes. These logical nodes are again grouped into clusters that are treated as single nodes by the next higher layer. In this way, all location registers are included in this tree-type logical hierarchy architecture. Compared with the existing physical hierarchy architecture of location registers, the analysis results show that the proposed logical hierarchy architecture can reduce the number of databases and thereby the average total location management cost.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.73-79
• /
• 2015

PURPOSE: This study aims to examine the impact of the location of a walker-aid pocket that is attached to the walker while walking. METHODS: The research subjects included 10 male adults and 10 elderly people. The subjects used a two-wheeled walker for the walking analysis, and a firm velcro-type pocket that can be attached to the walker aid was used for weight loading. The size of the external loads was set at 2kg, which corresponds to approximately 2.5% of the mean body weight of the subjects. The pocket was attached to the left, center, and right sides of the walker aid. Stride length, stride, step width, and time were investigated according to the location change. RESULTS: No statistical differences were observed in all the walking factors among the adults and elderly people regardless of the changes in the location of the walker pocket. In cases of no weight and the 2kg walker pocket, stride length and strides were longer for the adults, while the step width was greater and walking time was longer for the elderly people. CONCLUSION: The weight of the walker pocket turn out to retard walking speed, although the location of the walker pocket is not affect walking with the walker-aid.