• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.223-234
• /
• 2007

The study, executed with Hallasan National Park, which deserves to be a typical ecotourism destination, aims to provide basic information on park management for early establishment of ecotourism in a national park by assessing its visitors' behavior and satisfaction with a nature trail established as a series of an environmental interpretation program. The questionnaire survey was conducted at Eorimok Square in the weekday and on the weekend for two months of August and September in 2006, and finally 144 valid samples were used for the analysis. As a result of the research, it revealed that the demographic characteristics of the visitors to Hallasan National Park tended to coincide with those of the visitors to other national parks In Korea. On the whole, it showed their low recognition level of nature trails built up in national parks and less experience in using them. However, the visitors' satisfaction level and intention of re-visit, and recommendation to others were comparatively higher after actually using the nature trail at the site of Hallasan National Park, which hints at the possibility of national parks' much weightier role as the ground for ecology education and the functional expansion of the environmental interpretation-related facilities and programs. As for the attributes having effects on users' satisfaction with a nature trail, substantial aspects such as accessibility, safety, uniqueness and interest in environmental interpretation, and educational quality as well as physical facility management were revealed to have equal effects on users' satisfaction level, so there still remain a lot of pending issues over the reality of national parks in the initial stage of ecotourism staying at the level of the introduction and establishment of the facilities for environmental interpretation. This research had surveyed visitors to Hallasan National Park and limited to the nature trail only. For more systematic and practical ecological management of a national park, the in-depth understanding of the attributes affecting satisfaction of ecotourists, including nature trails and other environmental interpretation programs, and more sophisticated measuring tools are needed.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.611-620
• /
• 1997

Objectives : The differentiation of tuberculous effusion from the other causes of exudative pleural effusion remained difficult even with aids of biochemical analyses and pleural biopsy. As the pathophysiology of tuberculous pleural effusion is an enhanced cell mediated immunity, Adenosine deaminase(ADA) and various eytokines including Inteferon-$\gamma$, tumor necrosis factor alpha(TNF-$\alpha$) are considered as useful diagnostic tools in differentiating exudative pleural effusion. The author would like to demonstrate the diagnostic usefulness of TNF-$\alpha$ in the differentiation of exudative pleural effusion, and compared the discriminating ability of TNF-$\alpha$ with ADA. Methods : Pleural fluids obtained from 80 patients (tuberculous : 39, malignant : 31, parapneumonic : 10) with exudate pleural effusions were processed for cell counts and biochemical analysis including ADA and TNF-$\alpha$. Results : Tuberculous pleural fluid showed higher levels of ADA and TNF-$\alpha$, $48.7{\pm}32.7U/L$ and $184.1{\pm}214.2pg/mL$ than that of non-tuberculous effusion $26.0{\pm}41.3U/L$ and $44.1{\pm}114.2pg/mL$, respectively (ADA, TNF-$\alpha$, p < 0.05, p < 0.01). Receiver operating characteristics(ROC) curves were generated for ADA and TNF-$\alpha$ and the best cut-off value for adenosine deaminase and TNF-$\alpha$were considered as 30U/L and 15pg/ml, respectively. Comparing the area under the ROC curves, there was no significant difference between ADA and TNF-$\alpha$. Conclusion : For the differential diagnosis of tuberculous pleural effusion from the other causes of exudative pleural effusions, TNF-$\alpha$ as well as ADA was considered as useful diagnostic method. However adding TNF-$\alpha$ to ADA has no further diagnotic benefit than ADA alone.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.111-129
• /
• 2015

This study tried to investigate the possibility and expectation effect to organize and operate NCS(national competency standards)-based vocational education curriculum in technical specialized high schools and meister high schools and the perceptions of specialty subject teachers about support plans for effective operation of the NCS-based curriculum. For this, the survey was conducted targeting 286 specialty subject teachers in technical specialized high schools and meister high schools. And the results are as follow: First, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that the positive expectation effect can be obtained through the NCS-based vocational education curriculum and the NCS-based vocational education curriculum should very much be applied to the school curriculum but it is impractical to organize and operate the NCS-based vocational education curriculum as the school curriculum from 2016. Second, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that industrial education needs can be analyzed, industry duties-based educational objectives and contents can be set up, industrial duties-based education can be done, the capability to develop and operate teachers' curriculum can be improved, and the NCS-based curriculum will be effective for industrial and academic cooperation and connection with communities by applying it but the realistic possibility will relatively be low. Third, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that tools for practice should be reorganized and expanded, the number of students targeting practical classes should be reduced by 15 to 20 persons, teachers' field education capability should be strengthened, supply and demand of teachers should be supported, industrial and academic cooperation-based field-centered education should be reinforced, and support of the NCS-based teaching materials to be textbooks should be required in terms of operating schools to operate the NCS-based vocational curriculum effectively. Support of finding jobs and field education which correspond with the NCS-based vocational curriculum should be provided, field instruction by ability of the national competency standards should be supported, field practice education projects about the NCS-based vocational curriculum should be provided and introduction and operation of the industrial employee performance evaluation system should be required in terms of the support plans of relevant organizations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.92-99
• /
• 2012

Many wildlife habitats have been destroyed and fragmented during the rapid industrialization and urbanization process in Korea. It is essential to connect these fragmented habitats to reduce road-kill of many types of endangered urban wildlife. The site selection for wildlife passages must take into account the behavior of the wildlife species for safe crossing utilizing many artificial barriers in urban areas. This study attempted to identify potential wildlife passage sites for the endangered and protected leopard cats of Gangseo Ecological Park in Seoul, Korea. A space syntax analysis, an analytical technique to objectively evaluate the spatial configurations related to passage selection, found that the integration value represents the accessibility and connectivity of spaces. In this paper, this means that the bigger the integration value, the more frequently the leopard cat passes through. The leopard cats were captured and radio-tracked for 72 hours once a month from March to June of 2009. The ArcGIS and Animal Movement of Hawth Tools were used to analyze the home range and movement paths, and Axwoman 4.0 was used to analyze space syntax. The daily average movement distance was $2.099{\pm}1.08km$. During the survey period, the leopard cats crossed over an urban expressway more than 20 times, running the risk of road-kill. The range of global integration values was 0.458~1.834, while that of the local integration was 0.210~6.061. Five sites that met across the leopard cats' movement routes and roads were selected to measure the local and global integrate values. Among these sites, the higher the integration value, the higher the road-kill possibility. Thus, two of five sites with high global and local integration values were suggested as potential wildlife passage sites for the leopard cats. Now, three tunnel passages are under construction at the suggested sites for which local integration value was highest (LI=4.369). Further studies are scheduled to verify these potential sites as suitable wildlife passages.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.1-14
• /
• 2012

The purpose of this study is to derive a desirable riverfront construction plan to me for the activities of citizens through the evaluation and analysis of the urban riverfront space from the perspective of universal design. Therefore, previous studies were examined in order to induce evaluation tools that bhve been grafted from the universal design concept; in addition, a field survey was conducted in Shincheon, Daegu, which was selected as the study target, in order to induce problems and improvement directions from the perspective of universal design. The major results can be summarized as follows. (1) In the 'fairness' aspect, all the items such as installation of integrated functional signage, showing pictures, symbols, foreign language signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; and therefore, it is necessary to improve the fairness of usage for everybody. (2) In the 'Functionality(Usability)' aspect, all items such as installation of bicycle paths beside access roads, installation of integrated functional signs, and night light signs were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the functionalities of these facilities. (3) In the 'Convenience' aspect, all items such as the installation of bicycle parking areas, continuous rest facilities, and back and ann support(handles) at resting facilities were determined to be 'All Unsuitable' for many sections; therefore, it is necessary to improve these facilities for the convenience of usage. (4) In the 'Information(Recognizability)' aspect, all items such as showing pictures, symbols, foreign languages and installation of night light signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the recognizability to minimize misunderstandings and confusion. (5) In the 'Safety' aspect, all items such as the installation of safe pedestrian paths in parking areas, using anti-slip and shock absorption materials on restroom floors, and the continuous installation of pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the safety to prevent accidents. (6) In the 'Amenity' aspect, access roads, parking areas, hygiene facilities, convenience facilities, and waterside facilities for many sections were determined to be 'All Unsuitable'; therefore, it is necessary to conduct more concentrated hygiene management. (7) In the 'Accessibility(Mobility)' aspect, all items such as the installation of safe pedestrian paths in parking areas, and continuous pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the accessibility to provide safety and convenience. (8) In the 'Durability' aspect, access roads, parking areas, rest facilities, convenience facilities, fitness facilities, and waterside facilities were determined to be 'All Unsuitable' for many sections, therefore, it is necessary to improve sunken or damaged areas by inspecting facilities by section.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.114-121
• /
• 2010

Traditional temples in Korea are the important cultural heritage because of artistic traditonal buildings and structures, paintings, sculptures, and big forest areas which are most ecological and beautiful in Korea. Since traditional temples still function as religious places for very long time, the sense of places intrinsic to the temples are very strong and vivid. The sense of place is very closely related to the conservation of the original landscape type. Recently however, there is a strong tendency to use solar energy in traditional temples because of the low energy efficiency of the old traditional architecture which may have negative impact on landscape which again in turn may lead to the destruction of the sense of place. The purpose of this study was to suggest some landscape design guidelines to protect the sense of place of traditional temple by investigating the impact of solar energy facility on the landscape experience of traditional temple. In order to do perform this purpose, Tongdosa was selected as a study site and four kinds of measurement tools(landscape image, temple identity, landscape satisfaction, degree of landscape improvement) were used as questionnaire items. 180 college students participated in the questionnaire survey. The analysis showed that the solar energy facility had very negative impact on landscape experience such as three landscape image factors(scenic beauty, openness, complexity), landscape satisfaction, temple identity, and landscape improvement. Based on the results, three landscape improvement plans were suggested. First, solar energy facility should be built in the forest in order not to be exposed to visitors, if possible. Second, the landscape management of traditional temple should emphasize on sustaining scenic beauty and temple identity along with the provision of openness. Lastly, detailed landscape guideline should be prepared to regulate the scale, ratio, and the form of the artificial buildings and structures to protect the sense of place of traditional temple.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.39-54
• /
• 2013

Recent explosive increase of electronic commerce provides many advantageous purchase opportunities to customers. In this situation, customers who do not have enough knowledge about their purchases, may accept product recommendations. Product recommender systems automatically reflect user's preference and provide recommendation list to the users. Thus, product recommender system in online shopping store has been known as one of the most popular tools for one-to-one marketing. However, recommender systems which do not properly reflect user's preference cause user's disappointment and waste of time. In this study, we propose a novel recommender system which uses data mining and multi-model ensemble techniques to enhance the recommendation performance through reflecting the precise user's preference. The research data is collected from the real-world online shopping store, which deals products from famous art galleries and museums in Korea. The data initially contain 5759 transaction data, but finally remain 3167 transaction data after deletion of null data. In this study, we transform the categorical variables into dummy variables and exclude outlier data. The proposed model consists of two steps. The first step predicts customers who have high likelihood to purchase products in the online shopping store. In this step, we first use logistic regression, decision trees, and artificial neural networks to predict customers who have high likelihood to purchase products in each product group. We perform above data mining techniques using SAS E-Miner software. In this study, we partition datasets into two sets as modeling and validation sets for the logistic regression and decision trees. We also partition datasets into three sets as training, test, and validation sets for the artificial neural network model. The validation dataset is equal for the all experiments. Then we composite the results of each predictor using the multi-model ensemble techniques such as bagging and bumping. Bagging is the abbreviation of "Bootstrap Aggregation" and it composite outputs from several machine learning techniques for raising the performance and stability of prediction or classification. This technique is special form of the averaging method. Bumping is the abbreviation of "Bootstrap Umbrella of Model Parameter," and it only considers the model which has the lowest error value. The results show that bumping outperforms bagging and the other predictors except for "Poster" product group. For the "Poster" product group, artificial neural network model performs better than the other models. In the second step, we use the market basket analysis to extract association rules for co-purchased products. We can extract thirty one association rules according to values of Lift, Support, and Confidence measure. We set the minimum transaction frequency to support associations as 5%, maximum number of items in an association as 4, and minimum confidence for rule generation as 10%. This study also excludes the extracted association rules below 1 of lift value. We finally get fifteen association rules by excluding duplicate rules. Among the fifteen association rules, eleven rules contain association between products in "Office Supplies" product group, one rules include the association between "Office Supplies" and "Fashion" product groups, and other three rules contain association between "Office Supplies" and "Home Decoration" product groups. Finally, the proposed product recommender systems provides list of recommendations to the proper customers. We test the usability of the proposed system by using prototype and real-world transaction and profile data. For this end, we construct the prototype system by using the ASP, Java Script and Microsoft Access. In addition, we survey about user satisfaction for the recommended product list from the proposed system and the randomly selected product lists. The participants for the survey are 173 persons who use MSN Messenger, Daum Caf$\acute{e}$, and P2P services. We evaluate the user satisfaction using five-scale Likert measure. This study also performs "Paired Sample T-test" for the results of the survey. The results show that the proposed model outperforms the random selection model with 1% statistical significance level. It means that the users satisfied the recommended product list significantly. The results also show that the proposed system may be useful in real-world online shopping store.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.1-12
• /
• 2005

Policies regarding to soil quality of the United States, the United Kingdom, the Netherlands, Germany, and Demark were analyzed to suggest Korean policy for improving soil quality concept and it's implementation. All countries met four criteria: I) Soil quality levels of contaminants are indebt to concept of contaminant risk to recipients (human and ecosystem); ii) Any soil quality value can't be a magic number to determine whether a site is contaminated or not. To determine risk of sites, risk assessment of the sites should be followed; iii) Concentrations of contaminants of sites are not always significantly certain to risk of human and ecosystem of the sites; and iv) Soil quality levels are adopted based on land uses and plans. Considering our rooms to improve policies and analysis of the other country reports on their legislations about soil quality levels, our policy implementation could be approached from these directions: i) Our concept for soil quality levels needs to develop in scientific and rational. ii) Soil quality levels and risk assessment should be implemented as determining tools of site contamination in parallel, and iii) Soil quality levels depending on land uses and plans should be developed in debt with rational and scientific concept of risk. Increasing efficacy of Korea policy regarding the soil quality levels would be in dept to applying concepts of SCL (Soil Contamination Level) and SRL (Soil Regulatory Level) developed, implementing soil quality levels and risk assessment of contaminated sites in conjunction, and classifying three distinctions of land uses based on sensitiveness of recipients (human and ecosystem) to contaminants in soil in this research.