• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1663-1665
• /
• 2005

The urban transit system is operated by driverless and automatic. In driverless and automatic system, the system function is accomplished exactly to obtain the safety and reliability of system and the system is designed to minimize risk. In order to design the system, the functional analysis is performed. Recently functional analysis is performed by design tool which is used and verified by aerospace, military, etc. Generally, the design tool is used to perform functional analysis in urban transit system development project. The design toolassist the system engineer to analysis the function of system in basic design. Therefore, in this paper, it is performed the functional analysis to satisfy the system requirement of urban transit system and to confirm the operation of system using design tool.

• Archives of Pharmacal Research
• /
• 제15권4호
• /
• pp.376-378
• /
• 1992

A chemical tool was developed for the analysis of complex mixtures such as crude drugs by the method of pattern recognition. Pattern recognition was accomplished by a multiple reference peak identification method and three kinds of outlier statistics. This tool was tested on the analysis of synthetic mixtures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.419-419
• /
• 2000

This paper describes a requirement analysis for automotive engine design using a computer aided systems engineering tool RDD-100. Because the engine is a complex system with many subsystems, there are many needs of stakeholder throughout the life-cycle of the engine. The originating requirements have been derived from the needs and decomposed into leaf-node requirements with the tool. Many requirement errors have been detected during the decomposition process and resolved by modifying the requirements. Inconsistency problems have been also resolved with the tool, Analysis of engine requirements using RDD-100 brings clarity to engine design early in the development process.

• 스마트미디어저널
• /
• 제11권11호
• /
• pp.84-91
• /
• 2022

베이스보드 매니지먼트 컨트롤러(BMC, Baseboard Management Controller)는 다양한 통신 인터페이스를 사용하여 서버 모니터링, 유지보수, 제어 기능을 지원한다. 그러나, 디바이스 드라이버 초기화 과정에서 예기치 못한 문제가 발생할 경우 BMC가 정상적으로 동작하지 않을 수 있기 때문에 디바이스 드라이버 초기화 과정을 정확하게 분석하고, 분석 결과를 확인할 수 있는 기능을 제공하는 부팅 과정 프로파일링 도구는 필수적이다. 기존 부팅 과정 프로파일링 도구들은 BMC 부팅 과정 분석에 필요한 디바이스 드라이버 초기화 과정과 결과를 구체적으로 제공하지 않아 개발자가 필요에 따라 여러 도구를 조합하여 사용해야 하는 불편함이 있다. 본 논문에서는 BMC의 부팅 과정 프로파일링 도구를 제안한다. 제안하는 도구는 디바이스 드라이버 초기화 과정분석, CPU 및 메모리 사용률 분석, 커널 버전 관리 기능을 제공한다. 제안하는 도구를 사용하여 부팅 과정을 쉽게 분석할 수 있으며, 분석 결과는 부팅 시간 단축에 사용될 수 있다. 또한 제안한 도구를 Linux 기반의 BMC에 구현하고, 제안한 도구가 기존 프로파일링 도구에 비해 효율적임을 보인다.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.23-29
• /
• 2004

In this study, four kinds of $Si_3N_4$-based ceramic cutting tools with different sintering time were fabricated to investigate the relation among mechanical properties, grain size and tool life. They were used to turn gray cast iron at a cutting speed of 330m/min and depth of cut of 0.5mm and 1mm in dry, continuos cutting conditions. Multiple linear regression model was used to determine the relations among the mechanical property, grain size and the density. It was found that the combination of hardness and fracture toughness showed a good relation with tool life. It was also shown that hardness was the most important single element for the tool life.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.363-366
• /
• 2003

The hard turning is a turning operation performed in high strength alloy steels (HRC>30) in order to reach surface roughness close to those obtained in grinding. This is possible because of availability of improved tool materials (polycrystalline cubic boron nitride. PCBN), ad more rigid machine tools. According to many previous work of hard turning mechanism, the maximum temperature of cutting can be raised up to 100$0^{\circ}C$. As the heat generation rate is very high, the thermal displacement of tool holder cannot be negligible. Therefore, the aim of this paper is to analyze effects of high heat generation at CBN tool tip to the thermal displacement of a tool holder in hard turning and finally geometric accuracy. The thermal behavior of a CBN tool holder is investigated by numerical simulation and experiment, and the result shows thermal elongation of microns order is possible during hard turning process.

• Journal of Astronomy and Space Sciences
• /
• 제37권2호
• /
• pp.117-129
• /
• 2020

In a Satellite communication system, a link budget analysis is the detailed investigation of signal gains and losses moving through a channel from a sender to receiver. It inspects the fading of passed on data signal waves due to the process of spreading or propagation, including transmitter and receiver antenna gains, feeder cables, and related losses. The extent of the proposed tool is to make an effective, efficient, and user-friendly approach to calculate link budget analysis. It is also related to the satellite communication correlation framework by building up a graphical interface link analysis tool utilizing STK^® software with the interface of C# programming. It provides better kinds of graphical display techniques, exporting and importing data files, printing link information, access data, azimuth-elevation-range (AER), and simulation is also possible at once. The components of the link budget analysis tool include transmitter gain, effective isotropic radiated power (EIRP), free space loss, propagation loss, frequency Doppler shift, flux density, link margin, elevation plot, etc. This tool can be useful for amateur users (e.g., CubeSat developers in the universities) or nanosat developers who may not know about the RF communication system of the satellite and the orbital mechanics (e.g., orbit propagators) principle used in the satellite link analysis.

• Journal of applied mathematics & informatics
• /
• 제38권3_4호
• /
• pp.255-260
• /
• 2020

Today most students have a smartphone. Students learning numerical analysis can practice coding using their smartphone in the classroom without going to the computer lab. The tool NAPHP[1] makes it easy to practice coding using PHP in an internet web browser without installing a coding app on your smartphone. This paper introduces a debugging tool for the NAPHP.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.508-513
• /
• 2015

In this study, the effect of the helix angle and rake angle of a flat end-mill in the milling of titanium alloy was investigated. Tool shape parameters such as helix angle and rake angle affect the cutting force, cutting zone temperature, vibration, and chip flow mechanism, which in turn determine tool life, surface integrity, and dimensional accuracy of the milling process. To investigate the effect of the helix and rake angles, a certain range of parameters was selected, and three-dimensional tool models were generated for finite element analysis (FEA) for each case. The cutting force and pressure on the tool flank face and rake face were investigated by FEA. Further, several tool models were proposed for machining tests. The cutting force characteristics were investigated by the machining tests.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.148-155
• /
• 1995

The object of this study is to achieve a gteater understanding of meterial removal process and its mechanism. In this study, some applications of finite element techniques are applied to analyze the chip formation and cutting heat generation mechanism of metal cutting. To know the effect of cutting parameters, simulations employed some independent cutting variables change, such as constitutive deformation laws of workpiece and tool material, frictional coefficients and tool-chip contact interfaces, cutting speed, tool rake angles, depth of cut and this simulations also include large elastic-plastic defor- mation, adiabetic thermal analysis. Under a usual plane strain assumption, quasi-static, thermal-mechanical coupling analysis generate detailed informations about chip formation process and cutting heat generation mechanism Some cutting parameters are affected to cutting force, plastic deformation of chip, shear plane angle, chip thickness and tool-chip contact length and reaction force on tool, cutting temperature and thermal behavior. Several aspects of the metal cutting process predicted by the finite element analysis provide information about tool shape design and optimal cutting conditions.