• Journal of Korean Foot and Ankle Society
• /
• v.25 no.4
• /
• pp.157-164
• /
• 2021

Purpose: This study aimed to report the current trends in the management of the hallux valgus (HV) deformity over the last few decades through a survey of the Korean Foot and Ankle Society (KFAS) members. Materials and Methods: A web-based questionnaire containing 34 questions was sent to all KFAS members in September 2021. The questions were mainly related to the preferred techniques and clinical experience in correction in patients with an HV deformity. Answers with a prevalence of ≥50% of respondents were considered a tendency. Results: One hundred and nine (19.8%) of the 550 members responded to the survey. The most common symptom for determining surgical treatment was bunion pain (68.8%), and different surgical techniques were selected according to the following radiological parameters: HV angle 30 to 40 degrees and intermetatarsal angle 15 to 20 degrees. The two procedures most preferred by the respondents were distal chevron osteotomy (55.0%), and proximal chevron osteotomy (21.1%). In an average of 71.6% of respondents, Arkin osteotomy was performed simultaneously during HV surgery. HV accompanied by an overriding deformity of the second toe was most often addressed with a combination of second metatarsal osteotomy and soft tissue rebalancing procedure (35.8%). After HV surgery, the recurrence rate of HV deformity was found to be 12.2% on average and the surgeons who had performed minimally invasive surgery (MIS) for HV comprised 34.9% of the total respondents. Conclusion: This study provides updated information on the current trends in the management of the HV deformity in Korea. Both consensus and variation in the approach to patients with HV were identified by this survey study. Although MIS for HV has increased, it appears the consensus for selecting this method has not yet been established.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.1
• /
• pp.67-93
• /
• 2022

This study purposes for the based data for establishing the mid- to long term development direction of Anyang municipal libraries by conducting a survey of residents in Anyang city and focus group interviews with local experts. Based on the results of the survey and FGI analysis conducted in this study, the main implications and discussions for establishing mid- to long term development plans for Anyang municipal libraries in the future are summarized as follows. First, the services used by users are extremely limited compared to the utilization rate of library, and the utilization rate of library programs is low, therefore Anyang municipal libraries need to actively promote various services operated by the library, provide information, and make efforts to improve service use procedures simply. Second, library satisfaction is relatively high, but as a result of analyzing the reasons for some dissatisfaction, active budget investment for purchasing new library materials and ways to increase library accessibility are necessary. Third, due to the low awareness of the operation of specialized libraries, it is necessary to develop specialized, unique library services to Anyang municipal libraries through benchmarking of other best practices. Fourth, in the future, Anyang municipal libraries need to strengthen functions as a complex cultural center along with the functions as an information center, a lifelong education center, and a living convenience center. Lastly, it is required to construct a control tower that can systematically lead the operation of Anyang municipal libraries in the long term through the reorganization of the organizational system.

• Journal of Service Research and Studies
• /
• v.10 no.4
• /
• pp.43-55
• /
• 2020

Recently, as the importance of experience data increases, there are many attempts to deal with experience data from a data science perspective. In the case of approaching as a collection method of a quantitative survey method that seeks to quantify numerically such as big data, it is difficult to interpret the value of experience in a wide range, and it is relatively expensive and time consuming, and personal information infringement There is a limit to the analysis due to the risk of However, since ethnography, a procedure for collecting experience data based on qualitative research, is mainly carried out in the natural real environment of future customers from the perspective of users, it is possible to confirm the nature that customers face with a small sample. In addition, it is also easy to interpret the relational dimension of the empirical data. Although the ethnography method of collecting experiential data is economical and efficient, it is important to reduce errors in the collection process because the lack of scientific procedures for the data collection process can be a problem. It is important to secure the validity of whether the correct measurement tool is used for ethnography-based experiential data collection and to secure the reliability of the use of a valid measurement tool and method by accurately selecting the measurement target. From this point of view, it is necessary to verify the reliability of the research method that clearly selects the measurement target and secures the validity for the development of the correct measurement method and tool for the collection of ethnography experience data. Therefore, in this study, a verification study was conducted on the data and methodology cases of the'I know you_AI' service that analyzes the customer experience of self-employed based on the ethnography method of collecting experience data..

• Journal of Environmental Impact Assessment
• /
• v.32 no.4
• /
• pp.230-241
• /
• 2023

At a time when it is urgent to establish a management system for landscape quality assessment of offshore wind farms in Korea, we analyzed foreign cases to draw implications for improving the landscape quality assessment of offshore wind farms in Korea and to explore the direction of efficient landscape assessment. The main contents derived from the analysis of overseas cases and systems are as follows. First, offshore wind farms are large-scale projects, and it is necessary to consider the landscape from the pre-planning stage, as in overseas cases. Second, the evaluation items for marine landscape quality should be expanded and systematized. Third, a flexible evaluation system that can consider new landscape impacts is required. In order to identify the landscape impacts of offshore wind farm projects, we refer to the landscape assessment items and procedures derived from overseas cases, but reflect them appropriately to the domestic maritime conditions, and specifically introduce a plan to minimize the landscape impacts that may occur during offshore wind farm projects to contribute to the sustainable use of offshore wind power.

• Korean Journal of Animal Reproduction
• /
• v.9 no.2
• /
• pp.133-139
• /
• 1985

An immunoassay may be defined as an analytical procedure involving the competitive reaction between a limiting concentration of specific antibody and two populations of antigen, one of which is labelled or immobillized. The advent of immunoassay has revolutionised our knowledge of reproductive physiology and the practice of veterinary and clinical medicine. Radioimmunoassay (RIA) was the first of these methods to be developed, which meausred the analyte with good sensitivity, accuracy and precision (1,2). The essential components of RIA are:-(i) a limited concentration of antibodies, (ii) a reference preparation, and (iii) an antigen labelled with a radioisotope (usually tritium or iodine-125). Most procedures invelove isolating the antibody-bound fraction and measuring the amount of labelled antigen. Good facilities are available for scintilltion counting, data reduction nd statistical analysis. RIA is undergoing refinement through:-(i) the introduction of new techniques to separate the antibody-bound and free fractions which minimize the misclassification of labelled antigen into these compartments, and the amount of non-specfic binding. (3), (ii) the development of non-extration for the measurement of haptens (4), (iii) the determination of a, pp.rent free (i.e. non-protein bound) analytes (5), and (iv) the use of monoclonal antibodies(6). In 1968, Miles and Hales introduced in important new type of immunoassay which they termed immunora-diometric assay (IRMA) based on t도 use of isotopically labelled specific antibodies(7) in a move from limited to excess reagent systems. The concept of two-site IRMAs (with a capture antibody on a solid-phase, and a second labelled antibody to a different antigenic determinant of the analyte) has enabled the development of more sensitive and less-time consuming methods for the measurement of protein hormones ovar wide concentration of analyte (8). The increasing use of isotopic methos for diverse a, pp.ications has exposed several problems. For example, the radioactive half-life and radiolysis of the labelled reagent limits assay sensitivity and imposes a time limit on the usefulness of a kit. In addition, the potential health hazards associated with the use and disposal of radioactive cmpounds and the solvents and photofluors necessary for liquid scientillation counting are incompatable with the development of extra-laboratory tests. To date, the most practical alternative labels to radioisotopes, for the measurement of analytes in a concentration > 1 ng/ml, are erythrocytes, polystyrene particiles, gold sols, dyes and enzymes or cofactors with a visual or colorimetric end-point(9). Increased sensitivity to<1 pg/ml may be obtained with fluorescent and chemiluminescent labels, or enzymes with a fluorometric, chemiluminometric or bioluminometric end-point. The sensitivity of any immunoassay or immunometric assay depends on the affinity of the antibody-antigen reaction, the specific activity of the label, the precision with which the reagents are manipulated and the nonspecific background signal (10). The sensitivity of a limited reagent system for the measurement of haptens or proteins is mainly dependent upon the affinity of the antibodies and the smalleest amount of reagent that may be manipulated. Consequently, it is difficult in practice to improve on the sensitivity obtained with iodine-125 as the label. Conversely, with excess reagent systems for the measurement of proteins it is theoretically possible to increase assay sensitivity at least 1000 fold with alternative luminescent labels. To date, a 10-fold improvement has been achieved, and attempts are being made to reduce the influence of other variables on the specific signal from the immunoreaction.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.47-54
• /
• 2023

Purpose PET-CT imaging require an appropriate quality assurance system to achieve high efficiency and reliability. Quality control is essential for improving the quality of care and patient safety. Currently, there are performance evaluation methods of UN2-1994 and UN2-2001 proposed by NEMA and IEC for PET-CT image evaluation. In this study, we compare phantom images with the same experiments before and after PET-CT 3D normalization and well counter correction and evaluate the usefulness of quality control. Materials and methods Discovery 690 (General Electric Healthcare, USA) PET-CT equiptment was used to perform 3D normalization and well counter correction as recommended by GE Healthcare. Based on the recovery coefficients for the six spheres of the NEMA IEC Body Phantom recommended by the EARL. 20kBq/㎖ of ¹⁸F was injected into the sphere of the phantom and 2kBq/㎖ of ¹⁸F was injected into the body of phantom. PET-CT scan was performed with a radioacitivity ratio of 10:1. Images were reconstructed by appliying TOF+PSF+TOF, OSEM+PSF, OSEM and Gaussian filter 4.0, 4.5, 5.0, 5.5, 6.0, 6,5 mm with matrix size 128×128, slice thickness 3.75 mm, iteration 2, subset 16 conditions. The PET image was attenuation corrected using the CT images and analyzed using software program AW 4.7 (General Electric Healthcare, USA). The ROI was set to fit 6 spheres in the CT image, RC (Recovery Coefficient) was measured after fusion of PET and CT. Statistical analysis was performed wilcoxon signed rank test using R. Results Overall, after the quality control items were performed, the recovery coefficient of the phantom image increased and measured. Recovery coefficient according to the image reconstruction increased in the order TOF+PSF, TOF, OSEM+PSF, before and after quality control, RCmax increased by OSEM 0.13, OSEM+PSF 0.16, TOF 0.16, TOF+PSF 0.15 and RCmean increased by OSEM 0.09, OSEM+PSF 0.09, TOF 0.106, TOF+PSF 0.10. Both groups showed a statistically significant difference in Wilcoxon signed rank test results (P value<0.001). Conclusion PET-CT system require quality assurance to achieve high efficiency and reliability. Standardized intervals and procedures should be followed for quality control. We hope that this study will be a good opportunity to think about the importance of quality control in PET-CT

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.731-736
• /
• 2023

Recently, the medical field has been applying mandatory Electronic Medical Records (EMRs) and Electronic Health Records (EHRs) systems that computerize and manage medical records, and distributing them throughout the entire medical industry to utilize patients' past medical records for additional medical procedures. However, the conversations between medical professionals and patients that occur during general medical consultations and counseling sessions are not separately recorded or stored, so additional important patient information cannot be efficiently utilized. Therefore, we propose an electronic medical record system that uses speech recognition and natural language processing deep learning to store conversations between medical professionals and patients in text form, automatically extracts and summarizes important medical consultation information, and generates electronic medical records. The system acquires text information through the recognition process of medical professionals and patients' medical consultation content. The acquired text is then divided into multiple sentences, and the importance of multiple keywords included in the generated sentences is calculated. Based on the calculated importance, the system ranks multiple sentences and summarizes them to create the final electronic medical record data. The proposed system's performance is verified to be excellent through quantitative analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.13-24
• /
• 2022

Construction projects are exposed to various types of risks, which tend to increase. The increasing risks call for contractors' more attentions to forecasting and dealing with these risks. One of the measures to deal with contractors' risks is to forecast or estimate risk cost and include it in the construction budget. Although various researches in relation to risk cost have been observed, little attention has been paid to general contractors' perceptions and current practices in estimating risk cost of construction budget. The objective of the study is to identify and discuss key characteristics and implications based on the survey and analysis of general contractors' perceptions and current practices in estimating risk cost of construction budget. The study shows that there is a gap between the perception and the practice of estimating risk cost, that is, high perception of the importance of risk cost and a relatively low level of practice. It suggests that historical cost data, guidelines and corporate-level standard procedures are required to improve the current practice in addition to sufficient time allocations for risk cost estimating. It discusses that there is a need for using sophisticated estimating techniques including bid data analytics despite a low level of the current adoption, and also proposes that research and development in the field of the sophisticated estimating techniques should be further implemented in order to increase their practicality.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.821-829
• /
• 2006

Traffic load comprise primary input to pavement design causing pavement damage. therefore it should be proceeded suitable traffic load distribution modeling for pavement design and analysis. Traffic load have been represented by equivalent single axle loads (ESALs) which convert mixed traffic stream into one value for design purposes. But there are some limit to apply ESALs to other roads because it is empirical value developed as part of the original AASHO(American Association of State Highway Officials) road test. There have been many efforts to solve these problems. Several leading country have implemented M-E(Mechanistic-Empirical) design procedures based on mechanical concept. As a result, they established traffic load quantification method using load distribution model known as Axle Load Spectra. This paper details Axle Load Spectra and presents axle load distribution model based on normal mixture distribution function using truck load data collected by WIM system installed in national highway. Axle load spectra and axle load distribution model presented in this paper could be useful for basic data when making traffic load quantification plan for pavement design, overweight vehicle permit plan and pavement maintenance cost plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.673-683
• /
• 2008

This study improved the existing method of using the longitudinal strain and concept of influence line to develop Bridge Weigh-in-Motion system without axle detector using the dynamic strain of the bridge girders and concrete slab. This paper first describes the considered algorithms of extracting passing vehicle information from the dynamic strain signal measured at the bridge slab, girders, and cross beams. Two different analysis methods of 1) influence line method, and 2) neural network method are considered, and parameter study of measurement locations is also performed. Then the procedures and the results of field tests are described. The field tests are performed to acquire training sets and test sets for neural networks, and also to verify and compare performances of the considered algorithms. Finally, comparison between the results of different algorithms and discussions are followed. For a PSC I-girder bridge, vehicle weight can be calculated within a reasonable error range using the dynamic strain gauge installed on the girders. The passing lane and passing speed of the vehicle can be accurately estimated using the strain signal from the concrete slab. The passing speed and peak duration were added to the input variables to reflect the influence of the dynamic interaction between the bridge and vehicles, and impact of the distance between axles, respectively; thus improving the accuracy of the weight calculation.