• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.216-220
• /
• 2002

The microbiological examinations of food service operations were conducted for the hygienic evaluation at four elementary schools in Busan, Korea. Total one hundred and seventy two swabbed samples using sponge were collected from the surface of environments, utensils and equipments of food service facilities and analyzed by measuring the total, coliform and psychrotrophic count. Sampling sites were the surfaces of floors, drains, walls, knives, cutting boards, rubber gloves, vinyl aprons, plastic containers, carriers, shelves, trays, dry shelves, electric tray dryer, food containers, soup containers, rice cookers, frying pans, boiling cookers, refrigerators, dumb waiters and dishwashers. The swabbed samples kept in an ice-parked box were transported to a laboratory and analyzed. The results demonstrated that the degree of contamination depended on the sampling sites. Averages of total counts of surface swab samples were ranged from 0.62 to 7.79 Log CFU/200 cm$^2$. The level of coliforms were ranged from not detectable to 5.26 Log CFU/200 cm$^2$, and those of psychrotrophs from not detectable to 6.15 Log CFU/200 cm$^2$. The severely contaminated sites were dumb waiters, drains, rice cookers, knives, plastic containers and floors. Also cutting boards, rubber gloves, carriers, drying shelves, vinyl aprons, boiling cookers, soup containers, frying pans and refrigerators were highly contaminated with the level of abode 3.5 Log CFU/200 cm$^2$. Therefore, those sites should be focused and controlled according to control points of sanitation standard operating procedures (SSOP). Also, periodic microbiological examination in addition to visual examination is recommended on these highly contaminated sites indicated above results at food service operations in elementary school.

• Journal of Arbitration Studies
• /
• v.13 no.1
• /
• pp.245-283
• /
• 2003

Since enactment of the Product Liability Act(PLA) on July 2002, Enterprises in Korea should be insured the Product Liability under the Act. Therefore they had to make a special team and organize it to match with the Act. However, some enterprises didn't follow and prepare the team for the dispute resolution. For example, in America, many enterprises had been attacked the PLA and in Japan, as well. but Korea is rare for the PLA. Thus, this is to research the PLA for protecting the disputes. Upon this study, 1 would like to suggest some issues and a revision of the PLA. Those are the purpose of my research. In this study, it consists of 5 chapters for achieving the purpose of the research. Introduction of this study is mentioned in Chapter 1, and Chapter 2 is for outline of the PLA in Korea. At Chapter 3, the cases are analyzed in the disputes of importers to address important things we have to check. After the analysis, resolution methods in general on import practices are suggested at Chapter 4. Also, this study is summarized at Chapter 5 including further research. In this research, 1 find out complex of Product Liability insurance and issues related with PLA. For protecting the issues and disputes; importers should prepare a agreement of arbitration during the preparation of contracts. Nothing can be better than prevention on any disputes, but they can be happened sometimes without any intentions or by mistake. Solving these issues, the resolution methods of this research are the most valuable. The mediation and the negotiation do not force any legal matters. So, the dispute through them does not have a positive resolution, and the effectiveness of them is very low. Due to the resolution of issues, arbitration is a desirable resolution. In Korea, most people do not know about the arbitration due to the lack of understanding of arbitration. Currently arbitration related with Product Liability has not been followed up promptly because procedures and judgement from a court take for a long time. In sum, in order to solve the disputes properly, they should be supported by the arbitration system to concrete essential objectives, so to speak, protection of the victim and the improvement of arbitration. In addition, the systematic arrangements would be required to carry out all the methods above mentioned. Those are for manufacturers, importers, and customers for the dispute resolution.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.5 no.1
• /
• pp.12-17
• /
• 2009

Background : To do dental treatments successfully for dentally disabled patients who are unable to cooperate to procedures needs deep sedation (DS) or general anesthesia (GA). But there are some difficulties in selecting DS because of some disadvantages such as airway problem etc. But, if we select appropriate cases, DS would be better than GA. Methods : We reviewed total 238 cases of patients who had received dental treatments under GA or DS at the clinic for the disabled in Seoul National University Dental Hospital from November 2007 to February 2009. To compare anesthesia condition between DS and GA, we reviewed preanesthesia evaluation sheet, anesthesia or sedation records and PACU sheets retrospectively. Results : The number of DS cases was 25 (11%) and that of GA was 218 (89%). To maintain DS, intravenous propofol was infused with syringe pump (100%), and sevoflurane (134 cases) or propofol (13 cases) were used for sedation induction. Mean total treatment time for DS was 36 min and 2 hour 25 min for GA. The recovery time at PACU was 44 min for DS and 80 min for GA. There were no severe complications in DS, but 18 cases showed nausea and vomiting in GA. Conclusion : Deep sedation for disabled dental patients should be selected for effective behavioral control in conjunction with general anesthesia, considering duration and pain-evoking potentials of dental treatment and type and severity of patients' disabilities altogether.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.47-62
• /
• 2016

An integrated database(DB) system was developed to manage the marine geological data and geophysical data acquired from around the Korean peninsula from 2009 to 2013. Geological data such as size analysis data, columnar section images, X-ray images, heavy metal data, and organic carbon data of sediment samples, were collected in the form of text files, excel files, PDF files and image files. Geophysical data such as seismic data, magnetic data, and gravity data were gathered in the form of SEG-Y binary files, image files and text files. We collected scientific data from research projects funded by the Ministry of Oceans and Fisheries, data produced by domestic marine organizations, and public data provided by foreign organizations. All the collected data were validated manually and stored in the archive DB according to data processing procedures. A geographic information system was developed to manage the spatial information and provide data effectively using the map interface. Geographic information system(GIS) software was used to import the position data from text files, manipulate spatial data, and produce shape files. A GIS DB was set up using the Oracle database system and ArcGIS spatial data engine. A client/server GIS application was developed to support data search, data provision, and visualization of scientific data. It provided complex search functions and on-the-fly visualization using ChartFX and specially developed programs. The system is currently being maintained and newly collected data is added to the DB system every year.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2012

Marine scientific monitoring, including monitoring of oil pollution, marine ecosystems, and the marine environment in general, has been being carried out continuously in order to assess the impact of oil pollution since the Hebei Spirit oil spill in December 2007. GIS thematic maps containing visual and summarized information are very useful for conducting exploratory analyses on the spatio-temporal variability of the marine environment and marine ecosystems due to oil pollution. Defining map types and building a legend in accordance with data characteristics are essential elements for mapping. In the present study, map types were defined according to the data attributes and GIS data types for each data item and classification of data intervals for the legend was defined by using two data distribution types through a histogram analysis. The data interval method was defined as follows: If the histogram of data has a uniform distribution, an equal interval method is applied; in the case of a normal distribution, a standard deviation method is applied. In addition, thematic map templates were made for each map type through the definition of marginal elements. Through the establishment of systematic mapping methods and procedures in this study, it was possible to effectively make standardized thematic maps for various kinds of marine scientific data.

• Elastomers and Composites
• /
• v.21 no.1
• /
• pp.13-19
• /
• 1986

The effects of several vulcanizing accelerators on the determination of kinetic parameters of natural rubber vulcanizate was studied by DSC. Kinetic parameters were determined by means of the calculation procedures of Borchardt-Daniels and Oscillating Disk Rheometer (ODR) cure curve analysis, using both DSC exothermal thermogram and ODR cure curve. In order to examine the credibility in the DSC method the same compound which was und for DSC method was used for the comparison with the results of ODR data. Upon this method, kinetic rate constant (k), and Arrehenius parameter (Ea, ko, n) have been determined for rubber compounds via a new method using DSC thermogram and ODR cure curve. In the comparison of DSC and ODR results, kinetic parameters has shown good agreements between two results. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method of kinetic study of rubber vulcanization.

• Journal of Community Nutrition
• /
• v.7 no.3
• /
• pp.121-129
• /
• 2005

Food neophobia, unwillingness to try novel foods, is a personality trait that can influence children's food preferences and consequently their food acceptance and consumption. The purpose of this study was to determine whether children with food neophobia have poor dietary and growth outcomes compared to non-neophobic children. Subjects were 332 primary school children from 6 randomly selected schools in the district of Hulu Selangor, Selangor. Parents and children were interviewed to obtain demographic, socio-economic, food neophobia and dietary intake information. The children were also measured for weights and heights. One-way ANOVA and Chi-square procedures were utilized for statistical data analysis. Children with food neophobia had higher intakes of energy and most nutrients than average and neophilic children. However, only the mean intakes of protein (p < 0.05) , fat (p < 0.05), vitamin A (p < 0.01) and iron (p < 0.01) were significantly higher in neophobic than average or neophilic children. Compared to neophilic and average groups, a higher percentage of neophobic children met 2/3 of the RNIs for energy $(85.2\%)$, protein $(98.4\%)$ and vitamin A $(72.1\%)$. Mean percentage of carbohydrate energy was lowest$(54.8\pm6.6\%)$ while fat energy $(31.8\pm6.2\%)$ was highest among neophobic children. Neophobic group had the lowest percentage of children $(49.2\%)$ with carbohydrate energy > $55\%$ but highest percentage $(50.8\%)$ with fat energy > $30\%$. For the three study groups, the mean number of servings for all food groups, except grain and cereal, did not meet the Food Pyramid recommendations. Neophobic children consumed significantly more numbers of servings from the meat group than average and neophilic groups (p < 0.01). All study groups had relatively low mean dietary diversity scores but neophobic children had the lowest score $(0.67\pm0.73)$ compared to the average $(0.97\pm0.72)$ and neophilic $(1.98\pm0.81)$ groups. Significant difference in mean dietary diversity scores were only observed between neophobic and neophilic children (p<0.05). Higher percentages of neo-phobic children had low weight-for-height and were at-risk of overweight(p < 0.05). Nutrition practitioners need to understand children's food preferences in their efforts to promote healthful diets for children. To improve children's eating behaviors, parents may need the guidance and support from nutritionists and dietitians that are specific to their needs and their child's situation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.303-309
• /
• 2007

Statement of problem. The effect of gold electroforming on gold alloy was not studied. Purpose. This in vitro study investigate the effect of gold electroforming on gold-silver-palladium alloy. Material and methods. Three pieces of gold strips had undergone the electroforming procedures on one side and then half of the side again electroformed. The set mode for this study was program 1 ($200{\mu}m$). And the processing time was 15min (1/20 time to form $200{\mu}m$ coping). The confocal laser scanning microscope (PASCAL 5, Carl Zeiss, Bernried, Germany) was used to measure the thickness of the pure gold layer electroformed on the gold strips. Half of the gold strip was coated two times with electroformed gold, and the other half one time. The data from the cone focal laser system was processed to get the vertical profile of the strips and the difference of the vertical height between the double coated and single coated layer was regarded as the thickness of the gold coating. The layer thickness value to built 3D image of the cone-focal laser was set $0.5{\mu}m$. Next to the measurement of the thickness of the coating, the Vicker's hardness test was done. It was performed on the double coated surface, single coated surface and non-coated surface (back side) three times each. Results. The mean thickness value gained from gold electroforming technique was measured to be $22{\mu}m$ for sample 1, $23{\mu}m$ for sample 2, $21{\mu}m$ for sample 3. In the same condition of time, power and the amount of electrolyte, the data showed no difference between samples. According to the results of variance analysis, the differences among the variations in number of coating were statistically insignificant (p>0.05), meaning that the two times of gold electroforming coating did not change the hardness of gold-silver-palladium alloy. Conclusion. The test of thickness of gold coating proved the coherency of the gold electroforming procedure, in other words, when the power, the exposed surface area, processing time and the amount of electrolytes were set same, the same thickness of gold would be coated on. The hardness test showed that the electroformed gold coating did not change the hardness of the gold-silver-palladium alloy when it is coated not more than $45{\mu}m$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1131-1138
• /
• 2004

In Hierarchical Mobile Ipv6 (HMIPv6) networks, the mobility anchor point (MAP) handles binding update (BU) procedures locally to reduce signaling overhead for mobility. However, as the number of mobile nodes (MNs) handled by the MAP increases, the MAP suffers from the overhead not only to handle signaling traffic but also to Process data tunneling traffic. Therefore, it is important to control the number of MNs serviced by the MAP, in order to mitigate the burden of the MAP. We propose an adaptive load control scheme, which consists of two sub-algorithms: threshold-based admission control algorithm and session-to-mobility ratio (SMR) based replacement algorithm. When the number of MNs at a MAP reaches to the full capacity, the MAP replaces an existing MN at the MAP, whose SMR is high, with an MN that just requests binding update. The replaced MN is redirected to its home agent. We analyze the proposed load control scheme using the .Markov chain model in terms of the new MN and the ongoing MN blocking probabilities. Numerical results indicate that the above probabilities are lowered significantly compared to the threshold-based admission control alone.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.793-802
• /
• 2008

The development methods which utilize OSSs have been tried as new alternative to solve limits of the previous software developments such as the quality of software, and time and cost of developments. Especially, small and medium companies are suffering from difficulty in applying large-scale development methodology whenever they develop softwares. Therefore, in the current situation that demand for small-scale development methodology is increasing, the methods of utilizing OSSs can become an efficient way to save costs and reduce a development period. Accordingly, analysis of open-source is no fixed procedure or method to utilize open-source for software developments in the field. In this thesis, to solve such problems, we propose the procedures and methods for identifying and selecting suitable open-source, and effective methods for improvement and integration through least modification on the basis of synthesis of existing researches and experiences in development projects. For selection of OSSs, we did identify correct requirements for the software to be developed, investigate the open-source just matching with such requirements, draw a candidate index, establish assessment criteria, and the consequently present a method to select OSSs. And, we deduced the validity and improvement of each detailed activity from practical application to an actual project and assessment.