• Archives of Plastic Surgery
• /
• 제35권4호
• /
• pp.423-430
• /
• 2008

Purpose: Computed tomography theoretically should improve detection of foreign bodies and provide more information of adjacent soft tissues. And the CT scanner and PACS program proved to be an excellent instrument for detection and localization of most facial foreign bodies above certain minimum levels of detectability. The severity of injury in penetrating trauma to the face, it is often underestimated by physical examination. Diagnosis of a retained foreign object is always critical. Methods: From March, 2005 to February 2008 a study was done with 200 patients who had facial trauma. Axial and coronal CT images were obtained with a General Electric(Milwaukee, Wis) 9800 CT scanner at 130 kV, 90 mA, with a 2-mm section thickness and a $512{\times}512$ matrix. Results: Axial and coronal CT images at various window widths should be used as the first imaging modality to detect facial foreign bodies. The attenuation coefficients for the metallic and nonmetallic foreign bodies ranged from -437 to +3071 HU. As a general rule, metallic foreign bodies produced more Hounsfield artifacts than nonmetallic foreign bodies, thus providing a clue to their composition. All of the metallic foreign bodies were represented by a single peak and had a maximum attenuation coefficient of +3071 HU. Of the nonmetallic foreign bodies, glass had an attenuation coefficient that ranged from +105 to +2039, while plastic had a much lower coefficient that ranged from -62 to -35. wood had the lowest range of attenuation coefficients: -491 to -437. Conclusion: The PACS program allows one to distinguish metallic from nonmetallic foreign bodies and to individually identify the specific composition of many nonmetallic foreign bodies. This program does not, however, allow identification of the specific composition of a metallic foreign body. We recommend this type of software program for CT scanning of any patient with an injury to the face in which a foreign body is suspected.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.596-602
• /
• 2018

최근 나노임프린트 리소그래피 공정이 마이크로/나노 스케일의 소자 개발에 있어서 경제적으로 대량 생산할 수 있는 기술로 주목 받고 있다. 자외선경화 방식의 나노임프린트의 경우 상온 및 저압의 장점과 함께 비진공 환경에서 공정을 통하여 설비 비용의 저감과 생산공정의 고속화를 달성할 수 있다. 그러나 이 경우 비진공 환경에서 발생하는 기포결함의 문제를 해결해야만 한다. 본 연구에서는 비진공 환경에서의 자외선경화 방식의 나노임프린트 공정에서 몰드 중공부 단면의 형상과 기포결함 발생 관계를 연구하였다. 일반적으로 많이 사용되는 사각형 단면과 타원형 단면 그리고 삼각형 단면에 대하여 2차원 유동해석 및 VOF 방법을 통하여 기포결함을 시뮬레이션 하였고 단면의 형상과 다양한 접촉각에 따른 유동선단의 특성을 분석하였다. 해석결과 몰드 중공부 형상은 기포결함 발생에 매우 중요한 영향을 미치며, 고려된 형상 모두 몰드와의 접촉각이 작을수록, 기판과의 접촉각이 클수록 기포결함 발생 가능성이 작아짐을 알 수 있었다. 또한 타원형 형상이 기포결함 발생방지 측면에서 가장 효과적임을 확인하였다.

• Archives of Plastic Surgery
• /
• 제36권2호
• /
• pp.153-160
• /
• 2009

Purpose: The heterodigital or homodigital artery island flap is a popular method of reconstruction for finger defects. Sometimes, digital artery island flap has some disadvantages such as postoperative flap edema, congestion, and partial necrosis of the flap margin. However, we could decrease these disadvantages by means of venous superdrainage. The aim of this study is to report usefulness and postoperative results of venous supercharging digital artery island flaps for finger reconstruction. Methods: From March of 2005 to March of 2008, a total of eight patients with soft tissue defects of the finger underwent venous supercharging digital island flap transfer. Briefly, the flap is harvested along with dorsal vein that is then anastomosed to a recipient vein in an end - to - end fashion, after flap transfer and insetting. Using this technique, eight patients were operated on, ranging in age 23 to 52 years. Results: All the flaps survived with a success rate of 100 percent, thus fully satisfying the reconstructive requirements. No postoperative flap congestion was recognized, obviating the need to take any measures for venous engorgement, such as suture removal. Among 8 cases, it was possible to make an long - term and follow - up observation more than 6 months. In these cases, the fact that light touches and temperature sensations can be detected in all the flaps. Cold intolerance and hyperesthesia were not seen in our series. Conclusion: Providing good harmony with conventional methods and microsurgery, inclusion of a vein with the heterodigital and homodigital artery island flap allows a more reliable and safer reconstructive choice for finger defects. The venous supercharged island flap is a reliable flap with a consistent arterial structure, and with its augmented venous drainage, it is more reliable, providing single - stage reconstruction of adjacent finger defects, including the fingertip.

• 여성건강간호학회지
• /
• 제18권2호
• /
• pp.126-134
• /
• 2012

Purpose: This research was done to compare obstetric pain, anxiety and cervical dilatation between an epidural analgesia group and a control group. Methods: Participants were assigned to the experimental or control group depending on their decisions for pain relief. Subjective / objective obstetric pain, anxiety level and cervical dilatation were measured and ANOVA was used for comparison of groups and paired t-test to make pre-post comparisons. Results: Homogeneity of pain, anxiety and cervical dilatation were assessed at the latent phase. Cervical dilatation was larger in the control group than the experimental group, at both the active and the transitional phase (F=22.9, p<.001; F=39.9, p<.001 respectively). The degree of pain and anxiety were not significantly different between the groups. Within the experimental group, subjective / objective pain and anxiety level were significantly lower post-analgesia compared to pre-analgesia in the active phase. All variables, except for sweating in the objective pain measurement, changed significantly at the transient phase. Conclusion: The results of this evidence-based research indicate that epidural analgesia while effective in relieving pain and anxiety may have an adverse effect on the cervix during labor stage I. Epidural analgesia should be used carefully during cervical dilatation in labor stage I.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.25-26
• /
• 2008

In this paper, the white organic light-emitting diode(OLED)was fabricated using the DPVBi of blue emitting material and a rubrene of orange color of fluorescent dye by vacuum evaporation processes. The device structure of OLED was Glass/ITO/2T-NATA(15nm)/NPB(3nm)/DPVBi(3nm)/DPVBi rubrene[2%](10nm)/DPVBi(25nm)/$Alq_3$ or New-ETL(60nm) /LiF(0.5nm)/ Al(100nm). The device with the $Alq_3$, layer shows orange color, and the luminance of 1000cd/$m^2$ at an applied voltage of 10.4V. On the other hand, the New-En layer results in white color, CIE coordinates of (0.327, 0.323), and the lowered driving voltage of 5V for achieving the same luminance value.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2006년도 하계학술대회
• /
• pp.490-493
• /
• 2006

모바일 IPv6 환경에서 모바일 노드와 대응 노드간의 바인딩 갱신에 관한 많은 연구가 활발히 진행 중에 있다. 하지만, 지금까지 제안된 대부분의 프로토콜이 바인딩 갱신 메시지에 대한 요청자와 응답자 인증 그리고 갱신 정보의 무결성에 대한 최적의 프로토콜을 찾고자 하고 있지만, 바인딩 갱신을 요청하는 노드의 위치 검증에 대해서는 요청메시지에 대한 응답 메시지를 수신함으로써 간접적인 확인만을 하고 있다. 본 논문에서는 공인 인증체제의 인가 인증서를 바탕으로 효율적인 위치 확인을 제공하는 모바일 IPv6 바인딩 업데이트 기법을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.325-327
• /
• 2000

This paper addresses the issues of the external system modeling and power system state estimation with the external model. A set of significant branches is identified in the external system based on their branch outage sensitivities on the tie-lines. Measurements on these branches are transffered to internal system and updated in real-time. The state estimator is run for different loading conditions by using the actual measurements for the internal system and selected significant external system measurements while keeping the rest of the external system measurements at their base case values. Simulation results are presented using the IEEE 118 bus system as an example.

• 한국자원식물학회지
• /
• 제6권1호
• /
• pp.53-75
• /
• 1993

This paper deals with Hyang-Yak Chip Seong Bang, which was made by Hyo-Tong Yu, Jung-Rye Noh and Yun-Duk Park by the order of King Sechong in 1431 and published in eighty-five volumes in 1433. This work includes on hundred three families and two hundred eighty-one species plants, and makes a comprehensive survey of past studies on some medical books. To publish this work, some specialists such as Jung-Rye Noh were sent to China and they made an exchange of opinions with some specialists of China to correct some facts. Cullen soryliforia and Trigonella foenumgraecum of Laguminosae were described as a subtropical plant or tropical plant which had not been produced in our country Also, it includes several anti-cancer plants such as Panax schinseng and Rubia akane that are very helpful to the treatment of diseases of adult people.

• 대한임상독성학회지
• /
• 제14권1호
• /
• pp.60-65
• /
• 2016

Aconitum is a genus of various species of flowering plants that belongs to the Family Ranunculaceae. Most Aconitum sp. have extremely toxic alkaloid substances such as aconitine, mesaconitine and hypaconitine. Among these substances, aconitine can cause fatal cardiotoxicity by activating sodium channels followed by calcium channels in myocardial cells. Even though there have been various therapeutic plans suggested comprising antidotes based on diverse case reports and studies, there is no confirmatory treatment protocol for aconite poisoning. Here, we report an aconite poisoning patient who had refractory ventricular tachyarrhythmia that did not respond to intravenous amiodarone therapies even though they were sustained for over 2 hours, but showed successful recovery following intravenous fat emulsions (IFE) therapy.

• 한국생활과학회:학술대회논문집
• /
• 한국생활과학회 2010년도 하계학술대회
• /
• pp.172-173
• /
• 2010