• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.5
• /
• pp.383-396
• /
• 1997

Numerical prediction of the pollutant dispersion over a two-dimensional hilly terrain is presented. The dispersion model used in the present work is based on the gradient diffusion theory and the finite-volume method on a non-orthogonal boundary-fitted grid system. The numerical model is validated by comparing the results with the available experimental data for the flat-floor dispersion within a turbulent boundary-layer. The numerical error analysis is performed based on the guideline of Kasibhatla et al.(1988) for the elevated-source dispersion in the flat-floor boundary layer having a power-law velocity and linear eddy-diffusivity profile. The influences of the two-dimensional hilly terrain on the dispersion from a continuously released source are numerically investigated by changing the emission locations and heights. It is found that the distributions of ground-level concentration are strongly influenced by the source location and the emission height. Hence, the terrain amplification factor is greatly enhanced when the pollutant source is located within a flow separation region. Dispersion from a source of short duration is also simulated and the duration time of the pollutant is compared at several downstream locations on a hilly terrain. The results of the numerical prediction are applied to the evaluation of environmental impacts due to the automobile exhausts at the seashore highway with a parallel mountain range.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.84-91
• /
• 2012

This paper aims to investigate the effects of cable rupture on the dynamic responses of concrete cable-stayed bridges in comparison with those of steel composite ones. It examines an adequate analysis method for simulating cable rupture using a time history function and evaluates the design guidelines for dynamic amplification factor (DAF). The computed DAFs from a concrete cable-stayed bridge are compared with those from a steel composite one based on the design guideline. As a conclusion, the current design guidelines for DAF may be reliable in overall but show some unstable cases despite satisfying the design guidelines, especially for concrete cable-stayed bridges.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1353-1359
• /
• 2004

There are many massive components added on the railway overhead-line. These components cause larger fluctuations of contact forces, which are due to wave reflections and Doppler effects when a high-speed train passes those. In this paper, mathematical formula are derived for the relation between the added mass and contact force fluctuations. Using the derived formula, we calculate a added mass on the overhead-line which cause amplification factor to become 2.5. German design practice requires that amplification factor due to the wave reflection should be less than 2.5 to obtain good current collection performance. To show the validity of the formula, simulation results are compared with the calculation results. Simulation results showed that contact force fluctuations grow rapidly when an added mass is larger than the calculation result. Therefore, the simple form of formula can be used for estimating maximum added mass not to cause large fluctuations of contact forces in early design phase.

• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.75-89
• /
• 2019

The paper presents experimental and numerical studies carried out on low-rise RC frames, typically found in developing countries. Shake table tests were conducted on 1:3 reduced scaled two-story RC frames that included a code conforming SMRF model and another non-compliant model. The later was similar to the code conforming model, except, it was prepared in concrete having strength 33% lower than the design specified, which is commonly found in the region. The models were tested on shake table, through multiple excitations, using acceleration time history of 1994 Northridge earthquake, which was linearly scaled for multi-levels excitations in order to study the structures' damage mechanism and measure the structural response. A representative numerical model was prepared in finite element based program SeismoStruct, simulating the observed local damage mechanisms (bar-slip and joint shear hinging), for seismic analysis of RC frames having weaker beam-column joints. A suite of spectrum compatible acceleration records was obtained from PEER for incremental dynamic analysis of considered RC frames. The seismic performance of considered RC frames was quantified in terms of seismic response parameters (seismic response modification, overstrength and displacement amplification factors), for critical comparison.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.1-10
• /
• 1989

In this paper, dynamic response of a truss bridge due to constantly moving train loads is analysed. Dynamic response of the bridge is found by the mode superposition method with the solution of the eigenvalue problem by Householder transformation and QL algorithm. To prove the validity of the analysis procedure, the response due to a very slowly moving load is compared with the result from the static analysis program, and the dynamic response is also compared with the result from the direct integration method. Based upon this, the variation of dynamic amplification factors is investigated by changing the train types and speeds, and the result is compared with the code specified impact factor. From this study, it was known that the dynamic amplification factor is not quite different by train types in low speeds but in high speeds it is, and in the case of electric car and U. I. C. loads the factor could exceed the code specified impact factor depending upon the speed.

• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.2
• /
• pp.119-125
• /
• 2006

To understand the comprehensive mechanisms of biological function for insulin-like growth factor-I (IGF-I) in vertebrates, we have investigated the cDNA sequence of this gene in the korean rockfish (Sebastes schlegeli). The mature form of korean rockfish IGF-I was found to be comprised of 67 amino acid residues, showing about a 7 kDa molecular weight. In this study, we used the polymerase chain reaction (PCR) to obtain a korean rockfish IGF-I (KR IGF-I) cDNA fragment, and methods of rapid amplification of cDNA ends (RACE) to obtain a full length of the KR IGF-I sequence. The KR IGF-I encoded for a predicted amino acid sequence showed identities of 93.6 %, 90.7 %, and 85.4 % in comparison with flounder, chinook salmon, and human IGF-I, respectively. To obtain recombinant biologically active polypeptides, korean rockfish B-C-A-D domains were amplified using the PCR, then the isolated cDNA was expressed in the E. coli BL21(DE3). The recombinant KR IGF-I protein biological function was measured by stimulation of [$^3H$] thymidine incorporation, suggesting the cDNA codes for the korean rockfish proIGF-I.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.771-774
• /
• 2001

NADPH has been known as a regulating factor the biosynthesis of polyhydroxyalkanote(PHA), and the flux of NADPH for PHA biosynthesis could be enforced by the amplification of zwf gene encoding glucose 6-phosphate dehydrogenase. The recombinant plasmid pCZWF harboring PHA synthase, phbC from R. eutropha and zwf from E. coli were constructed, and were transformed to R. eutropha by electroporation. The biosynthesis of P(3HB-3HV) copolymer were carried out in transformant R. eutropha through the two-stage cultivation method using valerate as a precursor. The biosynthesis rate and PHA content of transformant R. eutropha harboring pCZWF were increased compared with transformant R. eutropha harboring only phbC. Especially, the molar fraction of 3HV was increased from 68% to 74% due to amplification of zwf gene. And the biosynthesis P(3HB-3HV) and P(3HB-4HB) carried out using propionate and ${\gamma}-butyrolactone$ as a precursor, respectively. But the rate, content, and molar fraction of biosynthesis copolymers were not influenced appreciably. This may be due to the reduced availability of NADPH.

• Laser Solutions
• /
• v.10 no.1
• /
• pp.11-17
• /
• 2007

We presented the proper laser processing conditions for the capillary line marking, which could be applied for the fabrication of injection needles. With changing the parameters such as lamp current, duty cycle and beam amplification factor of beam expander, we evaluated the processing performance considering amount of dross, processing efficiency and processed linewidth in the sample. We could carry out the proper line marking at the condition of 70% lamp current, duty cycle of 7-10% and 6-times amplification of beam diameter. To perform efficient line processing, the utilization of duty cycle of 12% at 80% lamp current was also preferred.

• Journal of Korean Port Research
• /
• v.5 no.1
• /
• pp.71-81
• /
• 1991

This study deals with the analytical and numerical solution for the combined wave reflection and diffraction near the impermeable rigid upright breakwater, subject to the excitation of a plane simple harmonic wave coming from infinity. Three cases are presented : a) the analytical solution near a thin semi-infinite breakwater, b) the analytical solution near the semi-infinite breakwaters of arbitrary edge angles, $30^{\circ},\;45^{\circ},\;and\;90^{\circ}$, c) the numerical solution near a detached thin breakwater the results are presented in amplification factor and wave height diagrams. Moreover, the amplification factors near the structure(2 wavelength before and behind the structure) are compared for the given cases. A finite difference technique for the numerical solution was applied to the integral equation obtained for the wave potential.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.15-20
• /
• 2016

Write amplification is a critical factor that limits the stable performance of flash-based storage systems. To reduce write amplification, this paper presents a new technique that cooperatively manages data in flash storage and nonvolatile memory (NVM). Our scheme basically considers NVM as the cache of flash storage, but allows the original data in flash storage to be invalidated if there is a cached copy in NVM, which can temporarily serve as the original data. This scheme eliminates the copy-out operation for a substantial number of cached data, thereby enhancing garbage collection efficiency. Experimental results show that the proposed scheme reduces the copy-out overhead of garbage collection by 51.4% and decreases the standard deviation of response time by 35.4% on average.