• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.347-356
• /
• 2013

To provide the information for the wetland management considering the water treatment ability of macrophytes, the growth characteristics and primary production by reed (Phragmites australis) and cattail (Typha angustifolia), and the decomposition rate of organic matter produced were investigated in two sub-wetlands (Banweol and Donhwa wetlands) of the Sihwa Constructed Wetland (CW) with different chemistry of inflows. The shoot height of P. australis and Typha angustifolia began to increase in March, and reached its peaks in July and August (340cm and 320cm, respectively). The shoot density of P. australis ranging $100{\sim}170EA/m^2$ was higher than that of T. angustifolia (max. $78EA/m^2$). Standing biomass of P. australis ranged from $1,350{\sim}1,980gDM/m^2$, with maximal biomass in Banwol Upper Wetland. And it was larger in upper wetlands than lower wetlands. On the other hand standing biomass of T. angustifolia ($1,940gDM/m^2$) was similar to that of P. australis in Banwol Upper Wetland. Primary productivity of P. australis was in the order of Banwol Upper Wetland ($2,050gDM/m^2/yr$) > Donghwa Lower Wetland ($1,840gDM/m^2/yr$) > Banwol Lowerr Wetland ($1,570gDM/m^2/yr$) ${\fallingdotseq}$ Donghwa Lower Wetland ($1,540gDM/m^2/yr$), and that of T. angustifolia ($2,210gDM/m^2/yr$) was higher than P. australis. Annual production of organic matter produced by P. australis and T. angustifolia was 845 ton DM/yr (423 ton C/yr), and about 90% was comprised of that by P. australis. From the litter decomposition rate (k) (P. australis: leaf 0.0062/day, stem 0.0018/day; T. angustifolia: leaf 0.0031/day, stem 0.0018/day), leaf was rapid degraded compare to stem in both P. australis and T. angustifolia. The litter decomposition rate of leaf was two times rapid P. australis than T. angustifolia, whereas that of stem was same in both. Annual litter decomposition amount of P. australis than T. angustifolia was 285 ton C/yr(67.3% of organic matter produced by macrophytes), indicating that 32.7% of organic matter produced by macrophytes is accumulated in the Sihwa CW.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.317-324
• /
• 2015

GNSS was firstly proposed for application in weather forecasting in the mid-1980s. It has continued to demonstrate the practical uses in GNSS meteorology, and other relevant researches are currently being conducted. Precipitable Water Vapor (PWV), calculated based on the GNSS signal delays due to the troposphere of the Earth, represents the amount of the water vapor in the atmosphere, and it is therefore widely used in the analysis of various weather phenomena such as monitoring of weather conditions and climate change detection. In this study we calculated the PWV through the meteorological information from an Automatic Weather Station (AWS) as well as GNSS data processing of a Continuously Operating Reference Station (CORS) in order to analyze the heavy snowfall of the Ulsan area in early 2014. Song’s model was adopted for the weighted mean temperature model (T_m), which is the most important parameter in the calculation of PWV. The study period is a total of 56 days (February 2013 and 2014). The average PWV of February 2014 was determined to be 11.29 mm, which is 11.34% lower than that of the heavy snowfall period. The average PWV of February 2013 was determined to be 10.34 mm, which is 8.41% lower than that of not the heavy snowfall period. In addition, certain meteorological factors obtained from AWS were compared as well, resulting in a very low correlation of 0.29 with the saturated vapor pressure calculated using the empirical formula of Magnus. The behavioral pattern of PWV has a tendency to change depending on the precipitation type, specifically, snow or rain. It was identified that the PWV showed a sudden increase and a subsequent rapid drop about 6.5 hours before precipitation. It can be concluded that the pattern analysis of GNSS PWV is an effective method to analyze the precursor phenomenon of precipitation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.31-38
• /
• 2019

This study quantified, through a direct harvesting method, storage and annual uptake of carbon from open-grown trees for three landscape tree species frequently planted in the southern region of Korea, and developed quantitative models to easily estimate the carbon reduction by tree growth for each species. The tree species for the study included Camellia japonica, Lagerstroemia indica, and Quercus myrsinaefolia, for which no information on carbon storage and uptake was available. Ten tree individuals for each species (a total of 30 individuals) were sampled considering various stem diameter sizes at given intervals. The study measured biomass for each part of the sample trees to quantify the total carbon storage per tree. Annual carbon uptake per tree was computed by analyzing the radial growth rates of the stem samples at breast height or ground level. Quantitative models were developed using stem diameter as an independent variable to easily calculate storage and annual uptake of carbon per tree for study species. All the quantitative models showed high fitness with $r^2$ values of 0.94-0.98. The storage and annual uptake of carbon from a Q. myrsinaefolia tree with dbh of 10 cm were 24.0 kg and 4.5 kg/yr, respectively. A C. japonica tree and L. indica tree with dg of 10 cm stored 11.2 kg and 8.1 kg of carbon and annually sequestered 2.6 kg and 1.2 kg, respectively. The above-mentioned carbon storage equaled the amount of carbon emitted from the gasoline consumption of about 42 L for Q. myrsinaefolia, 20 L for C. japonica, and 14 L for L. indica. A tree with the diameter size of 10 cm annually offset carbon emissions from gasoline use of approximately 8 L for Q. myrsinaefolia, 5 L for C. japonica, and 2 L for L. indica. The study pioneers in quantifying biomass and carbon reduction for the landscape tree species in the southern region despite difficulties in direct cutting and root digging of the planted trees.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.111-120
• /
• 2023

The nucleation mechanism was studied using a calcium ion selective electrode (Ca ISE) to observe the formation of CaCO₃, a representative mineral in the CO2 cycle, and to analyze the effect of the Mg/Ca-ratio and temperature on the formation of pre-nucleation cluster (PNC) and CaCO₃. As a result of the experiment, a small amount of crystal was formed. Energy dispersive X-ray spectroscopy (EDS) was used for surface element analysis, and a field emission scanning-electron microscope (FE-SEM) was used for the morphology analysis of synthesized carbonates. These results showed that various shapes of crystalline CaCO₃ (calcite, aragonite, etc.) were observed for each Mg/Ca ratio and temperature. In addition, the calibration plot obtained from Ca ISE showed information on the formation process of CaCO₃. Our results showed that as magnesium ions interfered with the binding of calcium and carbonate ions and delayed the aggregation between PNCs, the nucleation and formation of CaCO₃ were delayed. On the other hand, the temperature showed an opposite trend as compared to the effect of magnesium under our experimental conditions, indicating that temperature accelerated the formation of CaCO₃. Furthermore, the morphology of CaCO₃ clearly changed according to the Mg/Ca ratio and temperature, and it was confirmed that the two factors are very important for CaCO₃ formation in that they could affect the overall process.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.185-190
• /
• 2008

In order to obtain the basic information for agricultural utilization of Germanium(Ge), the growth characteristics and the germanium uptake by water celery were investigated at different concentration of germanium in soil. This experiment was carried out in the Wagner pot(1 $5,000^{-1}a$). Germanium concentrations in soil for water celery cultivation were maintained at 0.26, 25.0, 62.5, and 125.0 mg $kg^{-1}$, respectively. The treatment of over Ge 25.0 mg $kg^{-1}$ in the soil led to germanium phytotoxicity such as reduction of plant height and fresh weight. The contents of germanium in water celery were increased with the increase of germanium concentration in the soil. When water celery was cultivated from soil maintained with Ge 25.0 and 62.5 mg $kg^{-1}$, its germanium contents in plant were 89.9 and 371.6 mg $kg^{-1}$, respectively. Then, the efficiency of germanium uptake of water celery in Ge 25.0 and 62.5 mg $kg^{-1}$ maintained plots was 1.7 and 2.4%, respectively. When water celery was cultivated from soil maintained with Ge 25.0, 62.5 and 125.0 mg $kg^{-1}$, its content of amino acid was found to be 89.8, 198.4, and 318.2 mg $g^{-1}$, respectively. To investigate the effect of N fertilizer application in uptake of germanium by water celery, these were treated with nontreatment, 1.0, 1.5 and 2.0 times of N application based on soil testing for cultivation of water celery. However, the amount of the N fertilizer application did not affect the contents of germanium in the water celery. When water celery was cultivated from soil maintained with two kinds of inorganic and organic germanium 50 mg $kg^{-1}$, respectively, the content of germanium were 24.2 mg $kg^{-1}$ in the Ge-132 treatment and 11.8 mg $kg^{-1}$ in the $GeO_2$ treatment.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.337-347
• /
• 2007

An embedded system is called a multi-mode embedded system if it performs multiple applications by dynamically reconfiguring the system functionality. Further, the embedded system is called a multi-mode multi-task embedded system if it additionally supports multiple tasks to be executed in a mode. In this Paper, we address a HW/SW partitioning problem, that is, HW/SW partitioning of multi-mode multi-task embedded applications with timing constraints of tasks. The objective of the optimization problem is to find a minimal total system cost of allocation/mapping of processing resources to functional modules in tasks together with a schedule that satisfies the timing constraints. The key success of solving the problem is closely related to the degree of the amount of utilization of the potential parallelism among the executions of modules. However, due to an inherently excessively large search space of the parallelism, and to make the task of schedulabilty analysis easy, the prior HW/SW partitioning methods have not been able to fully exploit the potential parallel execution of modules. To overcome the limitation, we propose a set of comprehensive HW/SW partitioning techniques which solve the three subproblems of the partitioning problem simultaneously: (1) allocation of processing resources, (2) mapping the processing resources to the modules in tasks, and (3) determining an execution schedule of modules. Specifically, based on a precise measurement on the parallel execution and schedulability of modules, we develop a stepwise refinement partitioning technique for single-mode multi-task applications. The proposed techniques is then extended to solve the HW/SW partitioning problem of multi-mode multi-task applications. From experiments with a set of real-life applications, it is shown that the proposed techniques are able to reduce the implementation cost by 19.0% and 17.0% for single- and multi-mode multi-task applications over that by the conventional method, respectively.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.1
• /
• pp.34-45
• /
• 2004

This paper describes the textural relations of mantle xenoliths and fluid inclusions in mantle-derived rocks found in alkaline basalts from Jeju Island which contain abundant ultramafic, felsic, and cumulate xenoliths. Most of the ultramafic xenoliths are spinel-lherzolites, composed of olivine, orthopyroxene, clinopyroxene and spinel. The felsic xenoliths considered as partially molten buchites consist of quartz and plagioclase with black veinlets, which are the product of ultrahigh-temperature metamorphism of lower crustal materials. The cumulate xenoliths, clinopyroxene-rich or clinopyroxene megacrysts, are also present. Textural examination of these xenoliths reveals that the xenoliths are typically coarse grained with metamorphic characteristics, testifying to a complex history of evolution of the lower crust/upper mantle source region. The ultramafic xenoliths contain protogranular, porphyroclastic and equigranular textures with annealing features, indicating the presence of shear regime in upper mantle of the Island. The preferential associations of spinel and olivine with large orthopyroxenes suggest a previous high temperature equilibrium in the high-Al field and the original rock-type was a Al-rich orthopyroxene-bearing peridotite without garnet. Three types of fluid inclusions trapped in mantle-derived xenoliths include CO$_2$-rich fluid (Type I), multiphase silicate melt (glass ${\pm}$ devitrified crystals ${\pm}$ one or more daughter crystals ＋ one or more vapor bubbles) (Type II), and sulfide (melt) inclusions (Type III). C$_2$-rich inclusions are the most abundant volatile species in mantle xenoliths, supporting the presence of a separate CO$_2$-rich phase. These CO$_2$-rich inclusions are spatially associated with silicate and sulfide melts, suggesting immiscibility between them. Most multiphase silicate melt inclusions contain considerable amount of silicic glass. reflecting the formation of silicic melts in the lower crust/upper mantle. Combining fluid and melt inclusion data with conventional petrological and geochemical information will help to constrain the fluid regime, fluid-melt-mineral interaction processes in the mantle of the Korean Peninsula and pressure-temperature history of the host xenoliths in future studies.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.497-507
• /
• 1997

This study was conducted to evaluate the association of various lifestyle with blood pressure. The data were obtained from the individuals who got routine health examination in Department of Occupational Medicine, Yeungnam University Hospital from June to September, 1996. Among these people, we selected 130 cases of hypertensives (97 males, 33 females) and 150 normotensives(70 males, 80 females) and study was conducted. The authors collected the information of the risk factors related to hypertension such as age, family history of hypertension, fasting blood sugar, serum total cholesterol, alcohol consumption(g/week), smoking history, relative amount of salt intake (low, moderate, high), the frequency' of weekly meat consumption, BMI, daily coffee consumption(cups/day) and the frequency of regular exercise(frequency/week) through questionnaire and laboratory test. By simple analysis, BMI was significantly associated with hypertension in male(p<0.05), and the frequency of weekly meat consumption was significantly associated with hypertension in female(p<0.05). Using logistic regression model, elevated odds ratio was noted for fasting blood sugar, serum total cholesterol, family history of hypertension, alcohol consumption, salt intake and BMI, and reduced odds ratio was noted for coffee consumption and exercise in male but fasting blood sugar(odds ratio=1.022, 95% CI=1.000-1.044), family history in both of parents(odds ratio=3.301, 95% CI=1.864-4.738), salt intake(odds ratio=1.690, 95% CI=1.082-2.298) and BMI(odds ratio=1.204, 95% CI=1.065-1.343) were statistically significant(p<0.05). In female, elevated odds ratio was noted in serum total choles terol, family history of hypertension, BMI and meat consumption. Of all these variables, the family history of hypertension in either of parents(odds ratio=4.981, 95% CI=3.650-6.312), family history in both of parents(odds ratio=16.864, 95% CI=14.577-19.151), BMI(odds ratio=1.167, 95% CI=1.016-1.318) and meat consumption(odds ratio=2.045, 95% CI=1.133-2.963) showed statistically significant association with hypertension in female(p<0.05).

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.313-319
• /
• 2018

The purpose of this study was to provide the basis for the vegetable seedlings export research and policy establishment by analyzing vegetable seedlings export status from the agricultural quarantine statistics in Korea and the changes of temperature and relative humidity during the vegetable seedlings shipping export transportation to Japan. From 2007 to 2016, various vegetable seedlings such as cabbage, tomatoes, cucumber, onion and etc., have been exported to more than 20 countries around the world. The main exporting country of vegetable seedlings for commercial purposes is Japan, and the major exported seedlings to Japan in 2016 were fruit vegetable grafted seedlings such as eggplant, tomato, cucumber, watermelon and pepper. Total export amount of the fruit vegetable seedlings to Japan in 2016 were 2,575,446 seedlings and it is approximately 0.7 to 1.6 million dollars. The grafted seedlings exported to Japan were consumed for urban agriculture and farm use. Shipping transportation took about 24 hours in the process of receiving the package ${\rightarrow}$ shipment ${\rightarrow}$ quarantine (Busan port) ${\rightarrow}$ Quarantine (Japan Shimonoseki Port). The growing demand for vegetable seedlings due to the development of urban agriculture in Japan and the growing interest and demand for vegetable grafting seedlings in neighboring countries such as Russia will be an opportunity to expand the export size of Korean vegetable grafting seedlings. In order to expand the export of vegetable seedlings in Korea, it is necessary to ensure further active government policy and research on the production of export seedlings, seedlings storage and transportation technology and analysis of exporting countries' market information.