• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.1-7
• /
• 2017

As the capacity of NAND flash module increases, the amount of RAM increases for caching and maintaining the FTL mapping information. In order to reduce the amount of mapping information managed in the RAM, a demand-based address mapping method stores the entire mapping information in the flash and some valid mapping information in the form of cache in the RAM so that the RAM can be used efficiently. However, when cache miss occurs, it is necessary to read the mapping information recorded in the flash, so overhead occurs to translate the address. If the RAM space is not enough, the cache hit ratio decreases, resulting in greater overhead. In this paper, we propose a method using two tables called TPMT(Translation Page Mapping Table) and SMT(Segmented Translation Page Mapping Table) to utilize both temporal locality and spatial locality more efficiently. A performance evaluation shows that this method can improve the cache hit ratio by up to 30% and reduces the extra translation operations by up to 72%, compared to the TPM scheme.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.289-302
• /
• 2017

During the research period, error analysis of the amount of daily precipitation was performed with data obtained from 2DVD, Parsivel, and AWS, and from the results, 79 days were selected as research days. According to the results of a synoptic meteorological analysis, these days were classified into 'LP type, CF type, HE type, and TY type'. The dates showing the maximum daily precipitation amount and precipitation intensity were 'HE type and CF type', which were found to be attributed to atmospheric instability causing strong ascending flow, and leading to strong precipitation events. Of the 79 days, most days were found to be of the LP type. On July 27, 2011 the daily precipitation amount in the Korean Peninsula reached over 80 mm (HE type). The leading edge of the Northern Pacific high pressure was located over the Korean Peninsula with unstable atmospheric conditions and inflow of air with high temperature and high humidity caused ascending flow, 120 mm/h with an average precipitation intensity of over 9.57 mm/h. Considering these characteristics, precipitation in these sample dates could be classified into the convective rain type. The results of a precipitation scale distribution analysis showed that most precipitation were between 0.4-5.0 mm, and 'Rain' size precipitation was observed in most areas. On July 9, 2011, the daily precipitation amount was recorded to be over 80 mm (CF type) at the rainy season front (Jangma front) spreading across the middle Korean Peninsular. Inflow of air with high temperature and high humidity created unstable atmospheric conditions under which strong ascending air currents formed and led to convective rain type precipitation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.1-8
• /
• 2019

Carbon dioxide is one of the major driving forces causing climate changes, and many countries have been trying to reduce carbon dioxide emissions from various sources. Soil stores more carbon dioxide(two to three times) amounts than atmosphere indicating that soil organic carbon emission management are a pivotal issue. In this study, we developed a Soil Organic Carbon(SOC) storage estimation model to predict SOC storage amounts in soils. Also, SOC storage values were assessed based on the carbon emission price provided from Republic Of Korea(ROK). Here, the SOC model calculated the soil hydraulic properties based on the soil physical and chemical information. Base on the calculated the soil hydraulic properties and the soil physical chemical information, SOC storage amounts were estimated. In validation, the estimated SOC storage amounts were 486,696 tons($3.526kg/m^2$) in Jindo-gun and shown similarly compared to the previous literature review. These results supported the robustness of our SOC model in estimating SOC storage amounts. The total SOC storage amount in ROK was 305 Mt, and the SOC amount at Gyeongsangbuk-do were relatively higher than other regions. But the SOC storage amount(per unit) was highest in Jeju island indicating that volcanic ashes might influence on the relatively higher SOC amount. Based on these results, the SOC storage value was shown as 8.4 trillion won in ROK. Even though our SOC model was not fully validated due to lacks of measured SOC data, our approach can be useful for policy-makers in reducing soil organic carbon emission from soils against climate changes.

• Science of Emotion and Sensibility
• /
• v.6 no.2
• /
• pp.17-20
• /
• 2003

The present study analyzed and compared the mutual information obtained by stimulating saleswomen with 6 natural fragrances 100% basil oil, Lavender oil, lemon oil, jasmine oil, ylang-ylang oil (KIMEX Co., Ltd.), and skatole. When stimulated with basil and skatole, which were less favored fragrances, the women produced a greater amount of mutual information than when not stimulated with any fragrance. In addition, a comparison among the effects of the fragrances revealed that the subjects tended to produce more mutual information regarding less favored fragrances than regarding more favored ones. This is because the amount of mutual information in the cerebrum is linked to the women's preference regarding fragrances. Consequently, less favored fragrances have been demonstrated clearly to produce more mutual information among the subjects.

• Journal of Information Management
• /
• v.39 no.2
• /
• pp.235-249
• /
• 2008

The combination of information and technology makes dramatically increase both information quality and quantity. Almost of company utilize customer information for the purpose of increasing sales amount and profitability. The purpose of this paper is to discover customer information's utilization practices in the Korean financial industry. The case of K Bank's information analysis in the inbound and outbound marketing is provided, The customer segmentation is used for the inbound marketing by using RFM analysis. And the loan card model is used for the outbound marketing by using logit analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.852-856
• /
• 2005

This paper proposes a new design of the ECG simulator with high resolution by using small amount of memories based on discrete least square estimation equations instead of reading the stored data inside the look-up table. The experimental results have shown that the ECG simulator using discrete least square estimation equations can display the bipolar limb leads ECG signals with low PRD (percent root-mean-square difference) while taking the less amount of memories than the previous method which used the look-up table to store ECG data for ECG simulation.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.131-135
• /
• 2001

Recently, Internet is used widely. Many Web sites, however, are not designed based on user's view. So, this research aimed at grasping the user needs and structure of Web site which user used easily. First, to grasp user needs, questionnaires about the motivation, the purpose and the evaluation items of Web page were done. As a result, we found the easiness for the user. Next, we made subjects operated test pages in which the number of classes and the amount of information were changed. We collected the quantitative data of the optimum number of classes, amount of information and retrieval time. As a result, there was a significant difference in each numerical value. The results of this research are available when constructing a web site. so, usability of Web site can be improved by them.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.809-820
• /
• 2017

Efficient management of large-size wastes generated from disasters etc. is always in demand. Large-size wastes are closely connected to the environment, producing adverse effects on the air quality, water quality, living environment and so on. When large-size wastes are generated, we must be able to estimate the generated amount in order to transfer them to a temporary trans-shipment site, or to properly treat them. Currently, we estimate the amount of generated large-size wastes by using satellite images or unit measure for wastes; however, the accuracy of such estimations have been constantly questioned. Therefore, the present study was performed to establish three-dimensional spatial information based on UAS, to measure the amount of waste, and to evaluate the accuracy of the measurement. A measurement was made at a waste site by using UAS, and the X, Y, Z RMSE values of the three-dimensional spatial information were found to be 0.022 m, 0.023 m, and 0.14 m, all of which show relatively high accuracy. The amount of waste measured using these values was computed to be approximately $4,273,400m^3$. In addition, the amount of waste at the same site was measured by using Terrestrial LiDAR, which is used for the precise measurement of geographical features, cultural properties and the like. The resulting value was $4,274,188m^3$, which is not significantly different from the amount of waste computed by using UAS. Thus, the possibility of measuring the amount of waste using UAS was confirmed, and UAS-based measurement is believed to be useful for environmental control with respect to disaster wastes, large-size wastes, and the like.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.299-301
• /
• 2008

For an efficient operation of today's power system, power engineers are required to analyze enormous amount of data. Owing to the development of technology, a variety of power systems computational tools have been developed and commercialized. However, the practical use of computational tools not only requires that people be able to understand the results the tools produce but also extract the required information from the simulation results which generally involves massive amount of information. This paper introduces a novel interface that would complement the drawbacks in the visualization of data of the pre-existing tools and assist the user in readily retrieving the required information, in this case the rotor angle data, of the simulated system thereby making power system analysis more feasible to be effectuated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.353-355
• /
• 2018

The aim of this paper is Although a large amount of sensor data is generated in the manufacturing process of a manufacturing company and the necessity of utilizing sensor data is felt, there is a real difficulty in collecting a large amount of sensor data and introducing analysis / service. Using W3C Web document standard format, XML based technology, it collects data to provide production status and equipment status information, and researches middleware for sensor data processing that user can analyze.