• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.781-787
• /
• 2006

NiO-coated YSZ powder was prepared using heterogeneous precipitation of Ni hydroxides on YSZ particle surface and high energy milling. The powders were characterized by TG/DTA, XRD, XPS, and SEM. Amorphous Ni precipitate completely decomposed into NiO at $500^{\circ}C$ and the growth of NiO crystallites was constrained by the core particles. Nanocrystalline NiO-coated YSZ core-shell structure powder could be obtained after calcination at $800^{\circ}C$ for 2 h. A core-shell powder compact, due to high sinterability, showed a near theoretical density at $1350^{\circ}C$. After reduction at $900^{\circ}C$, interpenetrating Ni-YSZ microstructure with very uniformly distributed fine Ni and YSZ grains and pores was observed. In contrast, the mechanically mixed oxide sample showed less uniform distribution of pores and larger discontinuous We particles as compared with the core-shell samples.

• Journal of Powder Materials
• /
• v.11 no.6 s.47
• /
• pp.515-521
• /
• 2004

Fe(C) nanocapsules were prepared by the chemical vapor condensation(CVC) process using the pyrolysis of iron pentacarbonyl $(Fe(CO)_5)$. Their characterizations were studied by means of X-ray diffraction, X-ray photoelectron spectrometer and transmission electron microscopy. The long-chained Fe(C) nanocapsules hav-ing the mean size of under 70 nm could be obtained below $1100^{\circ}C$ in different gas flow rates. The particle size of the powders was increased with increasing decomposition temperature, but it was decreased with increasing CO gas flow rate. The Fe powders produced at $500^{\circ}C$ consisted of three layers of ${\alpha}$-Fe/$Fe_3C$/amorphous phases, but it had two phase core-shell structure which consited of $Fe_3C$ phase of core and graphite of shell at $1100^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.902-907
• /
• 2023

To understand the eutectic reaction mechanism and the relocation behavior of the core debris is indispensable for the safety assessment of core disruptive accidents (CDAs) in sodium-cooled fast reactors (SFRs). This paper addresses reaction products and their distribution of the eutectic melting/solidifying reaction of boron carbide (B₄C) and stainless-steel (SS). The influence of the existence of carbon on the B₄C-SS eutectic reaction was investigated by comparing the iron boride (FeB)-SS reaction by Raman spectroscopy with Multivariate Curve Resolution (MCR) analysis. The scanning electron microscopy with dispersive X-ray spectrometer was also used to investigate the elemental information of the pure metals such as Cr, Ni, and Fe. In the B₄C-SS samples, a new layer was formed between B₄C/SS interface, and the layer was confirmed that the formed layer corresponded to amorphous carbon (graphite) or FeB or Fe₂B. In contrast, a new layer was not clearly formed between FeB and SS interface in the FeB-SS samples. All samples observed the Cr-rich domain and Fe and Ni-rich domain after the reaction. These domains might be formed during the solidifying process.

• Journal of Magnetics
• /
• v.10 no.3
• /
• pp.122-127
• /
• 2005

New classes of LC resonators for micro magnetic sensor device were proposed and fabricated. The first type LC resonator (Type I) consists of a small piece of microwire and two cylindrical electrodes at the end of the microwire without direct contact to its ferromagnetic core. In type I resonator the ferromagnetic core of the microwire and cylindrical electrodes act as an inductor and two capacitors respectively to form a LC circuit. The second type LC resonator (Type II) consists of a solenoidal micro-inductor with a bundle of soft magnetic microwires as a core. The solenoidal micro-inductors fabricated by MEMS technique were $500\sim1,000\;\mu{m}$ in length with $10\sim20$ turns. A capacitor is connected in parallel to the micro-inductor to form a LC circuit. A tiny glass coated $CO_{83.2}B_{3.3}Si_{5.9}Mn_{7.6}$ microwire was fabricated by a glass-coated melt spinning technique. A supergiant magneto-impedance effect was found in a type I resonator as much as 400,000% by precise tuning frequency at around 518.51 MHz. In type II resonator the changes of inductance as a function of external magnetic field in micro-inductors with properly annealed microwire cores were varied as much as 370%. The phase angle between current and voltage was also strongly dependent on the magnetic field. The drastic increments of magnetoimpedance at near the resonance frequency were observed in both types of LC resonators. Accordingly, the sudden change of the phase angle, as large as $180^{\circ}C$, evidenced the occurrence of the resonance at a given external magnetic field.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.114-115
• /
• 2006

We investigated the effects of annealing on the rearrangement of H-bonding structure and its influence on the thermal and rheological properties of $2^{nd}\;and\;4^{th}$ pseudo-generation aliphatic hyperbranched (HB) polyesters based on 2,2-bis(methylol)propionic acid. During annealing of amorphous HB polyesters, the structure becomes more ordered as a consequence of multiple H-bonds formation between linear sequences. Structure ordering is more pronounced for the lower pseudo-generation HB polyester with low molar mass, low degree of branching and incompletely reacted core hydroxyl groups which greatly increases the possibility for multiple H-bond interactions.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.249-249
• /
• 2006

We have prepared an amphiphilic wedge-coil molecule consisting of a hydrophobic wedge-like segment and a hydrophilic poly(ethylene oxide) (PEO) segment. The wedge-coil block molecule self-assembles into cylindrical nanofibers in both polar as well as nonpolar solvents. Remarkably, the resulting nanofibers, as solvent polarity change from water to n-hexane, change from highly flexible coil-like to stiff rod-like characteristics. This dynamic switching in the stiffness of the nanofibers in response to solvent polarity is attributed to the structural inversion of cylindrical core from bulky dendritic segments with amorphous nature to crystallizable linear PEO segments.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.89-93
• /
• 1991

A new kind of a non-contact torque sensor which uses the difference of the maximum magnetic inductions as measurand was constructed. The torque sensor utilizes the tensile and compressive stress of two cores which are attached on the rotating shaft. This sensor shows that the linearity was better than 1 %, and the transient torque can be measured at the sampling rate of 10 kHz which is the same as magnetizing frequency of the core.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.717-722
• /
• 2010

Two derivatives of star shaped compounds based on naphthylamine with symmetric trisubstituted benzene as core, methoxy and ethoxy as end substitutions are synthesized. The synthesized compounds are characterized by UV-visible, FT-IR and NMR spectrometric techniques. The electronic and thermal properties of the compounds are studied using cyclic voltametry (CV) and differential scanning calorimetry (DSC) respectively. The data's obtained have similarity with the arylamines that have been already used in optoelectronic devices. So these compounds are interesting materials for applications in such devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.370-370
• /
• 2011

ZnO 나노 라드 위에 Quantum dot을 형성하고 최종적으로 TiO2를 Atomic Layer Deposition방법으로 증착하여, 그 passivation 효과가 solar cell의 효율에 미친 영향에 대한 실험을 진행하였다. 암모니아 솔루션을 이용한 Hydrothermal 방법으로 수직한 1차원 형태의 ZnO 나노라드를 TCO 기판 위에 성장시킨다. 여기에 잘 알려진 SILAR와 CBD 방법으로 CdS, CdSe 양자점을 증착한다. 그리고 amorphous TiO2로 표면을 덮는 과정을 거치는데, TiO2가 좁은 간격으로 형성된 ZnO라드 구조 위에서 균일하고 정밀하게 증착되도록 하기 위해 Atomic Layer Deposition을 이용하였다. 사용된 precursor는 Titanium isopropoxide와 H2O이며, 실험상에서 0~5 nm 두께의 TiO2 박막을 형성해 보았다. 다양한 분석 방법을 통해 TiO2/QDs/ZnO의 shell-shell-core 구조를 조사했다. (Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), and X-ray Photoelectron Spectroscopy (XPS)). 이를 solar cell에 적용하고 I-V curve를 통해 그 효율을 확인하였으며, Electrochemical Impedance Spectroscopy (EIS)를 통해서 재결합 측면에서 나타나는 변화 양상을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.102-107
• /
• 2017

The dependence of the IR optical properties of PMMA/$Al_2O_3$ nanocomposite on the alumina content was investigated in the wavelength range of $3500-2800cm^{-1}$. The samples were prepared via emulsion polymerization technique using oleic acid as a coupling agent. Grafting density calculations were carried out by means of elemental analysis CHN to yield the best coupling agent content. FTIR analysis confirmed the existence of a chemical bond between aluminum oxide and oleic acid. The outcomes of XRD analyses showed the presence of cubic gamma aluminum oxide in the nanocomposite, in contrast to the amorphous nature of PMMA. TEM images showed the core-shell morphology of the particles other than pristine PMMA. Optical constants of the nanocomposite were calculated based on FTIR spectra and the Kramers-Kronig equations. The presence of nano alumina modified some of the optical indexes in IR region.