• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.131-138
• /
• 2019

Diesel engines have important advantages over its gasoline counterpart including high thermal efficiency, high fuel economy and low emissions of CO, HC and $CO_2$. However, NOx reducing is more difficult on diesel engines because of the high $O_2$ concentration in the exhaust, marking general three way catalytic converter ineffective. Two method available technologies for continuous NOx reduction onboard diesel engines are Urea-SCR and LNT. The implementation of the Urea-SCR systems in design engines have made it possible for 2.5l and over engines to meet the tightened NOx emission standard of Euro-6. In this study, we investigate the characteristics of NOx reduction with respect to engine speed, load, types of catalyst and the $NH_3$/NOx ratio and present the conditions which maximize NOx reduction. Also we provide detailed experimental data on Urea-SCR which can be used for the preparation for standards beyond Euro-6.

• Animal Bioscience
• /
• v.35 no.2
• /
• pp.308-316
• /
• 2022

Objective: This study was conducted to determine reduction of various odorous materials from a swine farm equipped with a continuous pit recirculation system (CPRS) with aerobically treated liquid manure. Methods: The CPRS is used in swine farms in South Korea, primarily to improve air quality in pig houses. In this study, CPRS consists of a manure aerobic treatment system and a fit recirculation system; the solid fraction is separated and composted, whereas the aerobically treated liquid fraction (290.0%±21.0% per day of total stored swine slurry) is continuously returned to the pit. Four confinement pig barns in three piggery farms were used; two were equipped with CPRS and the other two operated a slurry pit under the slatted floor. Results: All chemical contents of slurry pit manure in the control were greater than those of slurry pit manure in the CRPS treatment (p<0.05). Electrical conductivity and pH contents did not differ among treatments. The biological oxygen demand of the slurry pit treatment was greater than that of the other treatments (p<0.05). Total nitrogen, total phosphorus, and ammonia nitrogen contents of the slurry pit treatment were greater than those of other treatments (p<0.05). Odor intensity of the CPRS treatment was lower than that of the control at indoor, exhaust, and outside sampling points (p<0.05). The temperature and carbon dioxide of the CPRS treatment in the pig barn was significantly lower than those of control (p<0.05). All measured odorous material contents of the CPRS group were significantly lower than those of the control group (p<0.05). Conclusion: The CPRS application in pig farms is considered a good option as it continuously reduces the organic load of animal manure and lowers the average odorant concentration below the threshold of detecting odorous materials.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.6
• /
• pp.55-63
• /
• 2022

Odors emitted from pig houses have been a constant root of legal issues in pig farming. These gases are among the main causes of health and mental stresses to nearby communities, so policymakers and researchers continuously study to reduce the concentration of odorous gases from pig facilities. A continuous field experiment proved that the concentration of odor emissions inside the pig houses is highly dependent on ventilation rate, breeding details, and animal activities. However, the standard odor emission rate worldwide widely varies due to differences in pig house designs and ventilation requirements. Thus, this study aimed to measure the odor emission rates, considering the actual condition of selected Korean pig houses, through field measurement. The odor measurements were performed at three different pig production facilities without odor abatement technologies. The target experimental pig houses were buildings for weaning, growing, and fattening pigs. Results showed that the actual ventilation rate in target pig houses falls below the standard ventilation requirement of pigs, resulting in high odor concentrations inside the pig houses.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.501-508
• /
• 2007

This study was conducted to evaluate effect of probiotic complex(Lactobacillus acidophilus, Bacillus subtilis and Aspergillus oryzae) on growth performance, blood immunological parameters and fecal malodor gas emissions in growing pigs. Forty-eight pigs[(Landrace × Yorkshire) × Duroc, 25.31±1.29kg average initial body weight] were used in 35d growth trial. Dietary treatments included CON(basal diet), PC1(basal diet + 0.1% probiotic complex) and PC2(basal diet + 0.2% probiotic complex). From d 0 to 20, ADFI was significantly increased in PC1 and PC2 compared to CON(Linear effect, P=0.013). From d 21 to 35, ADFI was increased in PC1 compared to CON(Quadratic effect, P=0.024). For the whole period, ADFI was increased PC2 and PC1 compared to CON(Linear effect, P=0.009, Quadratic effect, P=0.004). For the whole period, ADG was increased in PC1 compared to CON(Quadratic effect, P=0.017). G/F was not affected by treatments. Dry matter digestibility in PC2 was higher than PC1 and CON(Linear effect, P=0.001). Nitrogen digestibility was significantly higher in PC2 and PC1 than CON(Linear effect, P=0.005). In blood immunological parameters, Total protein, IgG, red blood cell(RBC) and white blood cell(WBC) were increased in PC2 compared to PC1 and CON(Linear effect, P<0.001, Quadratic effect, P<0.001). In fecal malodor gas emission, ammonia and acetic acid were significantly reduced in PC2 compared to CON(Linear effect, P<0.02). Hydrogen sulfide was significantly reduced in PC2 compared to CON(Linear effect, P=0.0002, Quadratic effect, P=0.018). However, total mercaptans was not affected by treatments. Water content of feces was not significantly different among the treatments. In conclusion, 0.2 % probiotic complex improved ADFI, apparent dry matter and nitrogen digestibility, Total protein, IgG, RBC and WBC. Also, it decreased ammonia, acetic acid and hydrogen sulfide emissions in growing pigs.

• Korean Journal of Poultry Science
• /
• v.48 no.1
• /
• pp.23-30
• /
• 2021

In this study, we measured the concentration of particulate matter (PM) and ammonia (NH3) emission in the winters according to the breeding type of laying hen houses. Measurements were performed thrice in Barn, Aviary, and Cage houses every 2 weeks from December to January. The changes in the PM10 and PM2.5 concentrations were similar in all three breeding types. The PM10 and PM2.5 concentrations, measured three times, were the highest in the Aviary house. In the results measured by time, the PM10 and PM2.5 concentrations were the lowest during the dark period (22:00 to 4:00) of the day. The NH3 concentration was the highest in the Cage house and the lowest in the Barn house. Regarding emissions over time, the results of the three measurements showed different patterns and differed from those of the PM. In addition, with passage of time from the 1st (december) to 3rd (january), the NH3 concentration gradually increased. The daily PM10 and PM2.5 concentrations in the Aviary house, which were higher than those of the other houses, were 4,787 ㎍/㎥ and 388.6 ㎍/㎥, respectively, while, the PM10 and PM2.5 concentrations outside the poultry houses were 226.0 ㎍/㎥ and 39.3 ㎍/㎥, respectively. The daily NH3 concentration was 7.70 ppm and 9.20 ppm at the center and end of the Cage house, respectively. This was higher than that in the other houses. In conclusion, the concentrations of PM (PM10, PM2.5) and NH3 were the highest in the Aviary and Cage laying hen houses, respectively.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.283-294
• /
• 2004

Air quality in the livestock waste compost pilot plant at the Colligate Livestock Station was assessed to quantity the emissions of aerial contaminants and evaluate the degree of correlation between them for different operation strategies; with the ventilation types and agitation of compost pile, in this study. The parameters analyzed to reflect the level of air quality in the livestock waste compost pilot plant were the gaseous contaminants; ammonia, hydrogen sulfide, and odor concentration, the particulate contaminants; inhalable dust and respirable dust, and the biological contaminants; total airborne bacteria and fungi. The mean concentrations of ammonia, hydrogen sulfide, and odor concentration in the compost pilot plant without agitation were 2.45ppm, 19.96ppb, and 15.8 when it was naturally ventilated, and 7.61ppm, 31.36ppb, and 30.2 when mechanically ventilated. Those with agitation were 5.50ppm, 14.69ppb, and 46.4 when naturally ventilated, and 30.12ppm, 39.91ppb, and 205.5 when mechanically ventilated. The mean concentrations of inhalable and respirable dust in the compost pilot plant without agitation were 368.6${\mu}g$/$m^3$ and 96.0${\mu}g$/$m^3$ with natural ventilation, and 283.9${\mu}g$/$m^3$ and 119.5${\mu}g$/$m^3$ with mechanical ventilation. They were also observed with agitation to 208.7${\mu}g$/$m^3$ and 139.8${\mu}g$/$m^3$ with natural ventilation, and 209.2${\mu}g$/$m^3$ and 131.7${\mu}g$/$m^3$ with mechanical ventilation. Averaged concentrations of total airborne bacteria and fungi in the compost pilot plant without agitation were observed to 28,673cfu/$m^3$ and 22,507cfu/$m^3$ with natural ventilation, and 7,462cfu/$m^3$ and 3,228cfu/$m^3$ with mechanical ventilation. They were also observed with agitation to 19,592cfu/$m^3$ and 26,376cfu/$m^3$ with the natural ventilation, and 18,645cfu/$m^3$ and 24,581cfu/$m^3$ with the mechanical ventilation. It showed that the emission rates of gaseous pollutants, such as ammonia, hydrogen sulfide, and odor concentration, in the compost pilot plant operated with the mechanical ventilation and with the agitation of compost pile were higher than those with the natural ventilation and without the agitation. While the concentrations of inhalable dust and total airborne bacteria in the compost pilot plant with the natural ventilation and with the agitation, the concentrations of respirable dust and total airborne fungi in the compost pilot plant with the mechanical ventilation and agitation were higher than those with the natural ventilation and without the agitation of compost pile. It was statistically proved that indoor temperature and relative humidity affected the release of particulates and biological pollutants, and ammonia and hydrogen sulfide were believed primary malodorous compounds emitted from the compost pilot plant.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• Korean Journal of Agricultural Science
• /
• v.44 no.1
• /
• pp.50-59
• /
• 2017

This study was performed to evaluate the effect of organic medicinal charcoal as a feed additive on aflatoxin absorption, odor emission, fecal microflora and in vitro digestibility in pig diet. A 10-day trial was conducted with 20 [(Yorkshire ${\times}$ Landrace) ${\times}$ Duroc] finishing pigs ($BW=81{\pm}3.3kg$) to investigate the population of Lactobacillus and E. coli in feces and fecal odor ($NH_3$, $H_2S$, total mercaptans, and Acetic acid) in vivo. The in vitro and in vivo treatments included: control (basal diet; CON); (basal diet + 0.25% Organic Medicinal Charcoal; OMC); (basal diet + 0.50% Pyroligneous Charcoal; PC); and (basal diet + 0.50% Coconut tree Charcoal; CC). The aflatoxin absorption capacity was 100, 10, and 20% in OMC, PC, and CC, respectively. The digestibility of dry matter in OMC was significantly higher than that of CON, PC, or CC in vitro (p < 0.05). The digestibility of organic matter in OMC was found to be significantly different from that of CON (p < 0.05). Fecal ammonia and $H_2S$ emissions of OMC were observed to be significantly lower than those of CON, PC, and CC (p < 0.05). Lactobacillus counts in feces of OMC and CC were significantly higher than those of CON and PC (p < 0.05). Fecal E. coli counts of OMC and CC were lower than those of CON and PC (p < 0.05). It was concluded that organic medicinal charcoal can be used as a feed additive in pig diets because it improves the digestibility of feed and fecal odor, and has positive effects on the population of microorganism in feces.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.8
• /
• pp.1147-1152
• /
• 2005

Two experiments were conducted to evaluate the effects of dietary Biotite V (BV) supplementation on growth performance, nutrients digestibility and fecal noxious gas content in finishing pigs. In Exp. 1, a total of eighty pigs (initial body weight 88.0${\pm}$1.35 kg) were used in a 35-d growth trial. Pigs were blocked by weight and allotted to five dietary treatments in a randomized complete block design. There were four pigs per pen and four pens per treatment. Dietary treatments included: 1) Control (CON; basal diet), 2) 200 mesh BV1.0 (basal diet+200 mesh Biotite V 1.0%), 3) 325 mesh BV1.0 (basal diet+325 mesh Biotite V 1.0%), 4) 200 mesh BV2.0 (basal diet+200 mesh Biotite V 2.0%) and 5) 325 mesh BV2.0 (basal diet+325 mesh Biotite V 2.0%). Through the entire experimental period, there were no significant differences in ADG, ADFI and gain/feed among the treatments (p>0.05). With the addition of Biotite V in diet, DM and N digestibilities were increased significantly (p<0.01). Also, Ca and P digestibilities tended to increase in pigs fed Biotite V supplemented diet (p<0.01) compared to pigs fed control diet. Supplementation of Biotite V in diet reduced the fecal $NH_3-N$ and volatile fatty acid (VFA) compared to CON treatment (p<0.01). In Exp. 2, a total of sixty four pigs (initial body weight 84.0${\pm}$1.05 kg) were used in a 35-d growth trial. Pigs were blocked by weight and allotted to four dietary treatments in a randomized complete block design. There were four pigs per pen and four pens per treatment. Dietary treatments included: 1) LP (low protein diet), 2) HP (high protein diet), 3) LP+BV (low protein diet+325 mesh Biotite V 1.0%) and 4) HP+BV (high protein diet+325 mesh Biotite V 1.0%). Through the entire experimental period, ADG and gain/feed tended to increase in HP and HP+BV treatments, however, there were no significant differences (p>0.05) among the treatments. With the addition of Biotite V in diets, digestibilities of nutrients (DM, N, Ca and P) were increased significantly (p<0.01). The addition of Biotite V in diets reduced the ammonia emissions in feces (p<0.01). Supplementation of Biotite V in diets also reduced the fecal propionic acid, butyric acid and acetic acid (p<0.01) compared to pigs fed diets without Biotite V. In conclusion, supplementation of Biotite V can increase nutrients digestibility and reduce fecal $NH_3-N$ and volatile fatty acid (VFA) concentrations in finishing pigs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2015

The IMO MEPC has been increasingly strengthening the emission standard for marine environment protection. In particular, nitrogen oxide (NOx) emissions of all ocean-going ships built from 2016 will be required to comply with the Tier-III regulation. In this study, a vanadia based SCR (Selective Catalytic Reduction) system developed for ship application was installed on a diesel engine for power generation of the training ship T/S SAENURI in Mokpo National Maritime University. For the present study, the exhaust pipeline of the generator diesel engine was modified to fit the urea SCR system. This study investigated the NOx reduction performance according to the two kind of injection method of urea solution (40%): Auto mode through the PLC (Programable Logic Control) and Manual mode. We were able to find the ammonia slip conditions when in manual mode method. So, the optimal urea injection quantity can be controlled at each engine load (25, 35, 50%) condition. It was achieved 80% reduction on nitrogen oxide. Furthermore, we found that the NOx reduction performance was better with the load up-down (while down to 25% from 50%) than the load down-up (while up to 50% from 25%) test.