• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.218-218
• /
• 2012

Nanocrystalline $SnO_2$ colloids are synthesized by hydrolysis of $SnCl_4{\cdot}5H_2O$ in aqueous ammonia solution. The synthesized $SnO_2$ nanoparticles with ca. 15 nm in diameter are coated on a fluorinedoped thin oxide (FTO) conductive substrate and heated at $550^{\circ}C$. The annealed $SnO_2$ film is treated with aqueous $TiCl_4$ solution, which is sensitzied with MK-2 dye (2-cyano-3-[5'''-(9-ethyl- 9H-carbazol-3-yl)-3',3'',3''',4-tetra-n-hexyl-[2,2',5',2'',5'',2''']-quater thiophen-5-yl]). Compared to bare $SnO_2$ film, the conversion efficiency is significantly improved from 0.22% to 3.13% after surface treatment of $SnO_2$ with $TiCl_4$, which is mainly due to the large increases in both photocurrent density from 1.33 to $9.46mA/cm^2$ and voltage from 315 to 634 mV. It is noted that little change in the amount of the adsorbed dye is detected from 1.21 for the bare $SnO_2$ to $1.28{\mu}mol/cm^2$ for the $TiCl_{4-}$ treated $SnO_2$. This indicates that the photocurrent density increased by more than 6 times is not closely related to the dye loading concentration. From the photocurrent and voltage transient spectroscopic studies, electron life time increases by about 13 order of magnitude, whereas electron diffusion coefficient decreases by about 3.6 times after $TiCl_4$ treatment. Slow electron diffusion rate offers sufficient time for regeneration kinetics. As a result, charge collection efficiency of about 40% before $TiCl_4$ treatment is improved to 95% after $TiCl_4$ treatment. The large increase in voltage is due to the significant increase in electron life time, associated with upward shift of fermi energy.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.1
• /
• pp.8-14
• /
• 2001

To investigate the effects of waste sludge from antibiotic fermentation on the growth of young radish and chemical properties of soil, five levels of fertilizer, control (recommended fertilizer, $N-P_2O_5-K_2O=160-59-104$ kg/ha), AS(control + sludge 1,000 kg/ha), AC(control + conventional compost 1,000 kg/ha), SNS(control - subtracting 30% N of sludge + sludge 1,000 kg/ha) and SNC(control - subtracting 30% N of conventional compost + conventional compost 1,000 kg/ha) were applied and radish was grown twice with same treatments on May and August in 1998. Germination rate and early growth of young radish grown with AS and SNS were lower than those grown in control and with AC, SNC. This negative effects by adding the sludge in the early growth seemed to be caused by damage of ammonia gas released during degradation of the sludge in soil. However, yield of young radish showed no significant difference among all the treatments including the AS and SNS at the 1st and 2nd experiment, and these suggested that the latter half of growth of young radish was accelerated by adding the sludge. Contents of T-N in young radish and inorganic N in soil showed a tendency to increase by adding the sludge while antibiotic substance, cephalosporin-C, was not detected in plant material and soils after harvest of young radish in both experiments. Consequently, waste sludge from antibiotic fermentation, which contains high levels of organic matter and nitrogen could be used as an useful resource in agriculture.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.133-140
• /
• 2016

This study was evaluated individual growth and hematological changes of young starry flounder, using hyperpigmentation marks on the blind side of body after feeding extruded pellet (EP) and moisture pellet (MP) for 45 days. As a result, the fish grew up to $220.1{\pm}47.8g$ in the EP treatment and $224.7{\pm}42.4g$ in the MP treatment, so the weight gain was significantly higher in the MP treatment ($74.6{\pm}17.3%$) than in the EP treatment ($63.7{\pm}16.9%$) (P<0.05). Osmolalities of flounder after 45 days culture were similar between the treatments (P>0.05), showing values of $359.8{\pm}4.2mOsm\;kg^{-1}$ in the EP treatment and $358.5{\pm}6.2mOsm\;kg^{-1}$ in the MP treatment. Similarly, other blood chemistry indicators such as sodium, chloride, total protein, albumin, glucose, total cholesterol, BUN, creatinine, ammonia, triglyceride, cortisol, GOT, GPT and hematocrit showed no differences between the treatments. However, the free fatty acid concentration was significantly higher in the MP treatment than in the EP treatment (P<0.05).

• Journal of Environmental Impact Assessment
• /
• v.6 no.1
• /
• pp.105-110
• /
• 1997

Sanitary landfill is a general method as a final disposal of municipal solid waste(MSW), therefore leachate characteristics are very various as lime goes by because of highly concentrated organic acids are contained non biodegradable COD. So it is hard to abide by the mandatory standards of discharge eventhough applying the physicochemical and biological processes to treat the leachate. The process of treating leachate are determined by the degree of removal and components, but they are highly contained organic materials. It is a removal method to use jointly with the physicochemical process if the hard and fast rule is needed. The critical components of material are COD, ammonia, salts and heavy metals in the case of treating biologically. Biological process is to use metabolism of microorganism, therefore it is a desirable condition which heavy metals are not contained, because they acting as an inhibitor of enzyme. Of these are contained, organic decomposition and synthetic function of microorganisms decrease significantly. Consequently, this research paper lays emphasis on the concentration of heavy metals in leachate and for the purpose of forecasting the factors which are affecting the leaching of metalic waste in some degree, experimented the various reacting conditions. 1. When the concentration of heavy metals in leachate is in comparison with the level eluted after reaction, at pH 7.9 the result of reaction for PCB to CCL scrap showed that Zn, Mn, Cu was more eluted 11.6 times, 340.3 times, and 2,705.5 times respectively than the leachate undiluted solution. 2. At the condition of strong acid pH 4.7, the concentration of heavy metals in EM undiluted solution showed that Zn, Mn, Cu was more eluted 26.5 times, 147.3 times, and 3,656.3 times respectively than leachate undiluted solution. 3. When the ratio leachate to EM was 50 vs 50(V/V%), Mn was more eluted 198.7 times than leachate undiluted solution, but Zn and Cu do not show the meaningful results. 4. The color of landfill leachate was black-brown. And fulvic acid that is main ingredient of NBD COD contained, oxygen of 44~50%. For that reason, I estimated that the level of Zn, Mn, Cu was higher than the case of leachate. 5. COD of leachate from general landfill is difficult to remove. Because the solution of heavy metals is improved by the character of leachate(pH & ingredient of oxygen etc.) hence the Mn, Cu, Zn act as disturbing factor, the biochemical treatment is hard. Therefore the type of PCB & CCL scrap, iron, aluminum contained metals need to previously separate from general wastes as much as possible.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.36-43
• /
• 2000

In oder to enhance the selectivity of TMA(trimethylamine) gas, the ZnO-based films which were doped with $Al_2O_3$, $TiO_2, $In_2O_3$ and $V_2O_5$ catalysts with various weight percents were deposited in oxygen by RF magnetron sputtering method. To improve electrical stability of sensors, the ZnO-based films were annealed in oxygen at $700^{\circ}C$ for 1 hour. The TMA selectivity of sensors was defined by the magnitude($S_{TMA}/S_{DMA}$ and $S_{TMA}/S_{NH3}$) of TMA sensitivity relative to DMA and sensitivity ammonia($NH_3$) sensitivity, respectively. The $ZnO+Al_2O_3(4\;wt.%)+TiO_2(1\;wt.%)+In_2O_3(1\;wt.%)$ sensor showed high $S_{TMA}/S_{DMA}$ of 5.9 and $S_{TMA}/S_{NH3}$ of 26 to 160 ppm at the working temperature of $300^{\circ}C$ respectively.

• Journal of fish pathology
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1991

This paper deals with the distribution of coliform group bacteria and the environmental factors in Suyeong Bay from November 1990 to February 1991. The ranges of environmental factors were as follows : Salinity 16.84~34.93%, Dissolved Oxygen $0.58{\sim}6.79m{\ell}/{\ell}$, COD 0.48~5.06 ppm, Nitrite $0.42{\sim}18.82{\mu}g-at/{\ell}$, Nitrate $0.50{\sim}53.23{\mu}g-at/{\ell}$, Ammonia $3.73{\sim}56.16{\mu}g-at/{\ell}$, Silicate $5.18{\sim}147.29{\mu}g-at/{\ell}$. The coliform group and fecal coliform group ranged $1.1{\times}10^2{\sim}2.4{\times}10^5/100m{\ell}$, $1.7{\times}10{\sim}3.5{\times}10^4/100m{\ell}$ each other. The ratio of TC/FC was 1.73~58.49 during study periods. Among the composition of coliform group, E. coli was dominent(64.4%), which was appeared all studying stations. E. coli I type was accounted for 97.4% in the E. coli.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.10-16
• /
• 2007

In this study, we examined the preparation and hydrolysis property of immobilized urease membrane to decompose harmful urea in the body and remove ammonia which was produced by its decomposition. Urease immobilized membrane was prepared by introducing anion-exchange group DEA into porous hollow-fiber membrane by radiation graft polymerization method, and immobilization of urease. When urease was immobilized at membrane introduced with anion-exchange group, the more increasing grafting rate, the more increasing immobilization amount. The result originates from the fact that a greater amount of protein was immobilized by forming a multilayer on the longer grafted chain. Meanwhile, the addition of the cross-linker was possible not only to suppress separation phenomenon produced during a washing process of immobilized urease membrane but also to enable the recycling of membrane. Urease Immobilized membrane with no separation phenomenon was prepared by cross-linking reaction for 5 h, and the hydrolysis rate of prepared urease immobilized membrane was over 98% and 50%, respectively, in 1 mol and 4 mol urea solutions.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.592-598
• /
• 2007

The adsorption capability of cobalt phthalocyanine derivatives was investigated by means of X-ray diffractometor (XRD), FT-IR spectroscopy, scanning electron microscopy (SEM), and temperature programmed desorption (TPD). According to TPD results for ammonia, cobalt phthalocyanine derivatives showed two desorption peaks at low temperature ($100{\sim}150^{\circ}C$) and high temperature ($350{\sim}400^{\circ}C$) indicating that there were two kinds of acidities. Tetracarboxylic cobalt phthalocyanine (Co-TCPC) has a stronger desorption peak (chemical adsorption) at high temperature and a weaker desorption peak (physical adsorption) at low temperature than cobalt phthalocyanine (Co-PC). The specific surface areas of Co-TCPC and Co-PC were 37.5 and $18.4m^2/g$, respectively. The pore volumes of Co-TCPC and Co-PC were 0.17 and $0.10cm^3/g$, respectively. The adsorption capability of triethyl amine calculated by breakthrough curve at 120 ppm of equilibrium concentration was 24.3 mmol/g for Co-TCPC and 0.8 mmol/g for Co-PC. The removal efficiencies of dimethyl sulfide of Co-TCPC and Co-PC in batch experiment of 225 ppm of initial concentration were 92 and 18%, respectively. The removal efficiencies of trimethyl amine of Co-TCPC and Co-PC in batch experiment of 118 ppm of initial concentration were 100 and 17%, respectively.

• Applied Chemistry for Engineering
• /
• v.23 no.4
• /
• pp.399-404
• /
• 2012

The objective of this study was to investigate the efficient pretreatment method for bioethanol production from rice hull. Ammonia and sodium hydroxide as an alkaline solution and dilute sulfuric acid as an acidic solution were used in a batch reactor under high-temperature and high-pressure conditions. The highest enzymatic saccharification efficiency of 82.8% and ash removal rate of 94.7% were obtained in the dilute sulfuric acid treated sample after the sodium hydroxide solution treatment. The enzymatic saccharification efficiencies and ash removals of pretreated rice hull samples have very similar variation tendency. This means that the maximum obstructive factor for the enzymatic saccharification of rice hull is the ash (silicate) content in biomass. The findings suggest that the combined sodium hydroxide-dilute sulfuric acid treatment system under high-temperature and high-pressure conditions is a promising pretreatment method to enhance the enzymatic saccharification of the silica-rich biomass.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.876-883
• /
• 1989

In order to investigate the index component and basis for the shelf-life of the grain share improved Meju, the effect of the storage time and package on the quality of Meju and soy sauce were studied during 90 days storage at $30^{\circ}C$. Also, sensory evaluation for the soy sauces from Meju with various storage time were carried out. During the storage period, moisture content, amylase and protease activity were decreased, on the other hand, the contents of amino-nitrogen and ammonia-nitrogen were increased. Among these components, protease activity was found the major index component for quality control because it was the most important component for soy sauce fermentation and the most changeable component of Meju during the storage period. According to the sensory test, the quality of soy sauce was agreed well with the protease activity of Meju, and the soy sauce from longer storage Meju was inferior organoleptic quality to that from shorter Meju. By the storage quality test, protease activity showed the highest value in 15 days storage Meju and decreased gradually with storage time passed. The basis of protease activity for quality control was 200 (O.D. at 660 nm/g). which was 50% of the initial activity And it was known that the shelf-life of the grain shape improved Meju was about 90 days . It was also shown that the storage in package did not affect noticeably to prolong the shelf-life of Meju on this study.