• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.241-251
• /
• 1992

The purpose of this study was to investigate the root resorption pattern in incisors in dog under intrusive orthodontic loadings of various magnitude and duration. Intrusive forces were generated by closed coil springs. Force magnitudes were 15-30gm, 50-60gm and 80-110gm. Durations were continuous and intermittent. Intermittent duration was applied at intervals of 12 hours. The readjustment of the force was done every 4 days. The forces were maintained for 30 days. All specimens were decalfied, embedded in paraffin and stained with hematoxylin-eosin stain. Observations were made with light microscope. The following results were obtained; 1. The continuity of root surface was ceased in all, except intermittent forced teeth with 25gm. 2. The root resorptions, cementoclasts and cemental lacunae, were increased around periapical regions and the destructive scope of bone was deeply extended as the exerted orthodontic forces increased. 3. It was inspected that, under the same forces, root resorption and bone destruction were more deeply appeared in the continuously forced teeth than the intermittently forced ones. 4. All of the alveolar bone, showed direct and undermining bone resorptions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.73-79
• /
• 2000

A material of 48 patients with 60 avulsed and replanted permanent teeth were followed retrospectively in the period of 1996. 1 to 1998. 12 (mean observation period=1year 7months). The age of the patients at the time of replantation ranged from 9 to 63 years (mean=24 years). Clinical records of patients were reviewed to obtain valid data concerning the extent of injury and treatment provided. Pulpal and periodontal healing states were examined with periapical x-rays and clinical examination procedures (i.e. percussion test and mobility test) at their recall visit. Root ankylosis was found in fifty-two teeth(87%) and root resorption in twenty-four(40%). Only two of the replanted teeth(3%) showed partial regeneration of the periodontal ligament. Six teeth(10%) resulted in tooth loss, but the remaining fifty-four were clinically well functioning. Most of teeth have mild marginal bone loss accompanied by gingival retraction without pathological periodontal pockets. The incidence of root resorption was much higher in younger age group. However, it was not affected by the interval between avulsion and replantation, the condition of supporting tissues, the degree of root formation and the type of splinting, indicating that multiple factors involved in determining the prognosis of replanted teeth. Based on these findings, avulsed teeth in unfavorable conditions (i.e. long extra-alveolar periods, etc.) should be preserved if possible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.6
• /
• pp.529-536
• /
• 2010

Purpose: The Purpose of this study is to show the total survival rate of implants with maxillary sinus grafting and the effects that reach the survival rate by classifying types of graft materials, implant type, operation method, residual bone height and evaluate graft material resorption rate after sinus grafting Patients and Methods: 61 dental implants placed with sinus bone grafting in 24 patients at Wonkwang University Sanbon Dental Hospital were installed simultaneously or after regular healing. Various bone grafts (autograft, xenograft, allograft, alloplast) and fourth implant type (GSII, Xive, Implantium, Novel biocare) were used. All implants were investigated clinically and radiographically, being with average 20 months follow-up period after installation. Results: 3 fixtures were lost, resulting in 95.1% cumulative survival rate of 61 osseointegrated dental implant. Survival rate according to bone material type, Implant type, operation method, residual bone height, have no statistically significant differencies. The mean preoperative residual alveolar bone height was 4.75 mm, average postoperative height of graft materials 10.8 mm, vertical bone resorption rate was 10% after 2 years. Resorption rate according to operation method was 7% (simultaneous) and 5% (delayed) after 1 year. Conclusion: It can be suggested that maxillary sinus grafting may have predictable result with various bone graft materials and implant type, residual bone height, operation method

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.599-611
• /
• 2000

Alveolar crest is the section of interproximal alveolar bone which includes the free edge of the alveolar process. An increase of the normal forces within limits of tolerance leads to deposition of new bone. If forces are beyond the limits of tolerance, resorption of bone will result whether the force produces pressure or tension. This study was designed to evaluate changes of alveolar bone levels in mesial and distal surface of the left, right first molar, by using pre-treatment, post-treatment panorama films. Two hundreds sixteen subjects were divided into adolescent group of 104 subjects and adult group of 112 subjects, to which orthodontic treatment with a bicuspid extraction (adolescent group-50 subjects, adult group-50 subjects) or without a nonextraction (adolescent group-54 !subjects, adult group-62 subjects) was applied by fixed appliances. Pre- and post-treatment Panorama films were traced, and alveolar crest height was measured. Amounts of changes in alveolar crest height by treatment were calculated md compared in terms of side of tooth, extraction, age. The results were as follows ; 1. When pre-treatment alveolar crest bone levels were compared, levels of adult group were significantly lower than those of adolescent group. 2. Post-treatment alveolar crest bone levels were significantly lower than pre-treatment levels. 3. When changes of alveolar crest height were compared, between adolescent and adult group were not significantly. 4. When changes of alveolar crest height were compared, significantly larger changes were noticed in ex윤action than nonextraction cases. 5. When changes of alveolar crest height were compared, significantly larger changes were noticed in maxilla than mandible. 6. When mesio-distally compared, significantly larger changes were observed in the distal than mesial sides of adult group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.330-333
• /
• 2009

Alveolar bone resorption after extraction impairs the necessary bone volume and complicates the case for implant surgery and aesthetic implant prosthesis. Immediate implant surgery after extraction decreases the number of surgical procedures and the duration of treatment, while allowing minimum alveolar bone resorption and preserving the residual bone volume. Although immediate implant holds many advantages such as preservation of hard and soft tissue around the extraction socket, greater implant survival rate and higher patient satisfaction, various complications and high failure rate are discouraging factors for the clinicians. In this case report, severe alveolar bone resorption with soft tissue changes were predicted after the extraction of prolonged retained deciduous incisors and impacted maxillary canines and thus decided on immediate implant procedure. Immediate implant surgery after extraction was carried out with minimal bone reduction and tapered wide-neck implant to establish initial stability. Simultaneous bone graft was done by filling the defect area with iliac cancellous bone with additional onlay-type bone graft and absorbable membrane on the labial bone for upper lip support. A stable and esthetic result was obtained with shortened treatment period.

• Journal of Periodontal and Implant Science
• /
• v.40 no.5
• /
• pp.227-231
• /
• 2010

Purpose: The healing process following tooth extraction apparently results in a pronounced resorption of the alveolar ridge. As a result, the width of alveolar ridge is reduced and severe alveolar bone resorption occurs. The purpose of this experiment is to clinically and histologically evaluate the results of using horse-derived bone mineral for socket preservation. Methods: The study comprised 4 patients who were scheduled for extraction as a consequence of severe chronic periodontitis or apical lesion. The extraction was followed by socket preservation using horse-derived bone minerals. Clinical parameters included buccal-palatal width, mid-buccal crest height, and mid-palatal crest height. A histologic examination was conducted. Results: The surgical sites healed uneventfully. The mean ridge width was $7.75{\pm}2.75\;mm$ at baseline and $7.00{\pm}2.45\;mm$ at 6 months. The ridge width exhibited no significant difference between baseline and 6 months. The mean buccal crest height at baseline was $7.5{\pm}5.20\;mm$, and at 6 months, $3.50{\pm}0.58\;mm$. The mean palatal crest height at baseline was $7.75{\pm}3.10\;mm$, and at 6 months, $5.00{\pm}0.82\;mm$. There were no significant differences between baseline and 6 months regarding buccal and palatal crest heights. The amount of newly formed bone was $9.88{\pm}2.90%$, the amount of graft particles was $42.62{\pm}6.57%$, and the amount of soft tissue was $47.50{\pm}9.28%$. Conclusions: Socket preservation using horse-derived bone mineral can effectively maintain ridge dimensions following tooth extraction and can promote new bone formation through osteoconductive activities.

• Journal of Periodontal and Implant Science
• /
• v.51 no.4
• /
• pp.264-275
• /
• 2021

Purpose: Periodontitis is considered a local risk factor for medication-related osteonecrosis of the jaws (MRONJ). However, little is known about the progression of periodontitis in the presence of zoledronic acid (ZOL). The aim of this study was to evaluate the effects of the systemic use of ZOL on the progression of experimental periodontitis (EP) in rats, as ZOL could modulate the progression of periodontitis and concomitantly cause MRONJ in individuals with periodontitis. Methods: Forty-eight male Wistar rats were randomly distributed in 6 groups (n=8 each). To induce EP, ligatures were placed around the right first mandibular molars. Three groups were treated with ZOL (0.15 mg/kg/week, intraperitoneal), and 3 with 0.9% saline solution (controls). In the ZOL/Lig30 and ZOL/Lig 15 groups, after 4 weeks of treatment with ZOL, EP was induced and euthanasia was performed after 30 and 15 days of EP induction, respectively. In both groups, the animals continued to receive ZOL after EP until the end of the experiment. In the Lig/ZOL group, EP was induced first, and 15 days later, ZOL was administered for 8 weeks, with euthanasia 1 week after the last dose. After euthanasia, the mandibles were evaluated using micro-computed microtomography (micro-CT) and histomorphometry. Bone loss was measured, and the presence of osteonecrosis was evaluated histologically. The data were evaluated using the Student t-test and the Mann-Whitney test, with a significance level of 5%. Results: In the Lig/ZOL group, micro-CT revealed less alveolar bone resorption in the distal root (P<0.01) than in the control group (Lig/Con). Histomorphometric analysis confirmed less alveolar bone resorption in the Lig/ZOL group (P=0.001). Histologically, osteonecrosis was more common in the ZOL groups. Conclusion: ZOL decreased alveolar bone resorption in rats with EP. However, it presented a higher risk for MRONJ.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.189-194
• /
• 2019

It is necessary to set the correct occlusal plane and to distribute the occlusal force uniformly considering the state of the opposing dentition during the prosthetic of the single edentulous patient with severe alveolar bone resorption. Implant supported overdenture is superior to complete denture in terms of maintenance and stability, and limited implants are used in fully edentulous patients with high alveolar bone resorption. Telescopic attachments using a newly introduced material based on poly-aryl-ether-ketone (PAEK) have the advantages of typical telescopic copping, excellent abrasion resistance, and are lighter and more economical than conventional implant overdentures. In this case, we restored maxillary arch with a implant retained overdenture using the telescopic attachment made of Pekktonand the mandible was restored with fixed implant prosthesis. Through these procedures esthetic aspects and functional outcomes were satisfactorily achieved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.214-221
• /
• 2023

In order to fabricate stable dentures in patients with severe resorption of residual ridges, various factors must be considered. One of them is the neutral zone, which is defined as the potential region in which the pressure of the tongue outward in the oral cavity and the pressure of the cheeks and lips directed inward from the outside of the oral cavity equalize during functioning. In patients with severe ridge resorption, if the teeth are usually arranged above the residual ridge, the teeth are located on the lingual side rather than the original position. Therefore, the functional space of the tongue is invaded, the tongue is positioned backward, and the sealing of the lingual border is broken, which acts as a factor reducing the maintenance of denture. In addition, it is also important for the stability of dentures to assume an interalveolar crest line connecting the maxillary and mandibular ridge crests, and to arrange the maxillary and mandibular artificial teeth to match the masticatory force to the interalveolar crest line. Therefore, good clinical results were obtained by fabricating dentures for the patient with poor alveolar residual ridge using neutral zone impression and ridge relationship analysis.

• The Journal of the Korean dental association
• /
• v.54 no.5
• /
• pp.328-341
• /
• 2016

An overall reduction in the horizontal and vertical dimensions occurs following tooth extraction and the resorption of the buccal part of the ridge is more pronounced than the lingual part. Thus, the resulting morphology of the healed alveolar ridge is often presenting with a discrepancy in bone height between the buccal and lingual aspects of the ridge. The implant with a sloped marginal configuration that is designed to match the sloped contour of the alveolar ridge provides the opportunity to maintain the buccal-lingual bone discrepancy and soft tissue around the implant. This paper introduces the OsseoSpeed TX Profile implants with sloped marginal configuration and explains the characteristics and clinical meanings of those implants.