• International Journal of Oral Biology
• /
• v.41 no.2
• /
• pp.83-88
• /
• 2016

Periodontitis is an inflammatory disease, which destroys the connective tissue and the alveolar bone. Recently, it has been suggested that the effect of natural substances could be induced into an anti-inflammatory environment. However, the effect of Safflower seed extract (SAF-M) associated with periodontitis has not been investigated yet. Therefore, the purpose of this study was to assess the anti-inflammatory effects of SAF-M. Cytotoxicity was assessed through MTS analysis using hGF and hPDL cells. Periodontitis was induced by injecting LPS into gingival tissue on the maxillary molars of rats ($45{\mu}g$ LPS/one time, 3 times a week for 3 weeks). SAF-M was administered daily at 30 mg/kg and 100 mg/kg. Alveolar bone resorption was evaluated through the micro-CT. hGF and hPDL cells showed differential cytotoxicity in response to SAF-M at 5 mg/ml and 1 mg/ml concentrations. Micro-CT showed reduction of the alveolar bone resorption in the SAF-M treatment group. These results suggested that SAF-M is a potential therapeutic agent for periodontitis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.376-390
• /
• 2001

Alveolar bone changes after immediate loading on implants up to one year were observed by means of standard intraoral X-ray measurement which were taken at 3 month intervals. At the same time, bone density changes were observed according to digital subtraction method which is a becoming a more and more promising diagnostic tool for implants. Following results were obtained ; 1. There was no significant difference in the amount of alveolar bone loss implant type, sex and implant diameter, but there was difference according to case selection. In fully bone anchored prostheses cases, bone loss was $1.16{\pm}0.15m$ whereas, in partial edentulous cases, it was $1.84{\pm}0.08mm$. 2. Alveolar bone loss after immediate loading showed a higher degree of bone loss than after submerged loading in the initial three months. But there were no significant difference at the 12th month. 3. According to the one year bone density change observation at the alveolar bone surrounding the implant, significant change was observed vertically, whereas no significant change could observed horizontally. According to the above mentioned results, we can conclude that immediate loading of implants results in a higher degree of alveolar bone loss in one year than submerged loading. But since alveolar bone loss rate decreases to a reasonable rate after the initial 3 months of rapid bone loss, immediate loading of implants seems to be an acceptable treatment modality for patients with good bone conditions. Fully bone anchored cases showed an favorable outcome, but partial edentulous cases showed more bony resorption. So this cases considered in case selections. Bone density changes observation in the study was performed for only one year therefore a more longitudinal observation may be studied.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.295-313
• /
• 2006

Statement of problem. Higher fracture rates were reported for Branemark implants placed in the maxilla and for 3.75 mm diameter implants installed in the posterior region. Purpose. The purpose of this study was to investigate the fracture of a fixture by finite element analysis and to compare different diameter of fixtures according to the level of alveolar bone resorption. Material and Methods. The single implant and prosthesis was modeled in accordance with the geometric designs for the 3i implant systems. Models were processed by the software programs HyperMesh and ANSA. Three-dimensional finite element models were developed for; (1) a regular titanium implant 3.75 mm in diameter and 13 mm in length (2) a regular titanium implant 4.0 mm in diameter and 13 mm in length (3) a wide titanium implant 5.0 mm in diameter and 13 mm in length each with a cementation type abutment and titanium alloy screw. The abutment screws were subjected to a tightening torque of 30 Ncm. The amount of preload was hypothesized as 650 N, and round and flat type prostheses were 12 mm in diameter, 9 mm in height were loaded to 600 N. Four loading offset points (0, 2, 4, and 6 mm from the center of the implants) were evaluated. To evaluate fixture fracture by alveolar bone resorption, we investigated the stress distribution of the fixtures according to different alveola. bone loss levels (0, 1.5, 3.5, and 5.0 mm of alveolar bone loss). Using these 12 models (four degrees of bone loss and three implant diameters), the effects of load-ing offset, the effect of alveolar bone resorption and the size of fixtures were evaluated. The PAM-CRASH 2G simulation software was used for analysis of stress. The PAM-VIEW and HyperView programs were used for post processing. Results. The results from our experiment are as follows: 1. Preload maintains implant-abutment joint stability within a limited offset point against occlusal force. 2. Von Mises stress of the implant, abutment screw, abutment, and bone was decreased with in-creasing of the implant diameter. 3. With severe advancing of alveolar bone resorption, fracture of the 3.75 and the 4.0 mm diameter implant was possible. 4. With increasing of bending stress by loading offset, fracture of the abutment screw was possible.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.37-55
• /
• 1989

The tissue reactions concerned in alveolar bone remodelling at the pressure zones of rat molar periodontium associated with the application of force (15 gm) to the maxillary first molar teeth of the albino rats were studied by the transmission electron microscopy. Osteoclasts referrable to bone resorption were observed thereafter 3 hour survival period and undermining resorption was generated thenceforth 2 day survival period. Bone resorption, reversal zone and new bone formation were simultaneously observed adjacent to the zone of undermining resorption in the 7 day survival period. Osteoclasts with well developed primary lysosome, ruffled border, clear zone, granules and Golgi apparatus were detected at the zone of the bone resorption, and dark and bright cells adjacent to the osteoclasts as well. Mononuclear cells and perpendicularly arranged collagenous fibers were observed in the reversal zone and, on the other hand, osteoblasts with well developed Golgi apparatus and rough endoplasmic reticulum were detected at the zone of bone formation.

• The Journal of the Korean dental association
• /
• v.50 no.3
• /
• pp.126-139
• /
• 2012

Loss of dentition can lead to not only compromised esthetics and functions of the patient, but also alveolar bone resorption. Bone grafting with prosthetic reconstruction of the gingiva can be selected for the treatment, and it provides many benefits as prosthetic gingival reconstruction does not require a complicated surgical process and is available within a short period of time, with stable clinical results. However, conventional porcelain fused to metal prosthesis has certain limits due to its size, and deformation after several firing procedures. In this clinical report, the author would like to introduce a patient with severe alveolar resorption who was treated with gingiva-shaped zirconia/titanium CAD/CAM implant fixed prosthesis for esthetic and functional rehabilitation. Clinical reports Clinical report 1, 2 : A case of loss of anterior dentition with atrophied alveolar bone. Implant retained zirconia bridge applied with Procera implant bridge system to simulate the gingiva. Upper structure was fabricated with zirconia all ceramic crown. Clinical report 3, 4 : A case of atrophied maxillary alveolus was reconstructed with fixed implant prosthesis, a CAD/CAM designed titanium structure covered wi th resin on its surface. Anterior dentition was reconstructed with zirconia crown. Conclusion and clinical uses. All patients were satisfied with the outcome, and maintained good oral hygiene. Zirconia/titanium implant fixed prosthesis fabricated by CAD/CAM system was highly accurate and showed adequate histological response. No critical failure was seen on the implant fixture and abutment overall. Sites of severe alveolar bone loss can be rehabilitated by implant fixed prosthesis with CAD/CAM system. This type of prosthesis can offer artificial gingival structure and can give more satisfying esthetics and functions, and as a result the patients were able to accept the outcome more fondly, which makes us less than hard to think that it can be a more convenient treatment for the practitioners.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.462-465
• /
• 2012

Horizontal and vertical ridge augmentation with implant placement was performed, using a block type of autogenous tooth bone graft in a 37-year old male patient. This material was very useful for the case of severe alveolar bone resorption of a single tooth. After 13 months, excellent bony healing was obtained and final restoration was performed successfully.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.31 no.2
• /
• pp.40-46
• /
• 2022

In maxilary anteriors, aesthetic aspect are of critical importance. but it is difficult to achieve esthetic results because of the narrow buccal-lingual alveolar bone width compared to the posterior teeth and alveolar bone resorption during tooth extraction. This case report describes how to minimize alveolar bone resorption and soft tissue collapse when immediate implant placement is done after extraction of the maxillary anterior teeth due to trauma.

• The Journal of the Korean dental association
• /
• v.54 no.4
• /
• pp.284-295
• /
• 2016

The aim of this study was to evaluate the effect of Epigallocatechin-3-Gallate (EGCG) on the alveolar bone metabolism in a collagen-induced arthritis (CIA) model in mice to enhance the understanding of rheumatoid arthritis (RA)-associated alveolar bone loss. Following the induction of CIA in animals (mice, n=16), mandibles were retrieved for micro-computed tomography (micro-CT) and isolation of alveolar bone cells (ABCs). In vitro osteogenic potentials of ABCs were evaluated and the mRNA expression of downstream effector genes was assessed. CIA was successfully induced in all animals, and micro-CT data showed that alveolar bone loss was significantly increased in the CIA group while the treatment of EGCG prevented the alveolar bone resorption. Osteogenesis by ABCs was significantly increased in the CIA+EGCG group in vitro. The analysis of mRNA expressions showed that osteoclastogenesis-associated genes were increased in CIA group while bone protecting genes were upregulated in EGCG treated group. The results demonstrate that EGCG downregulated the alveolar bone resorption in a CIA model in mice, and upregulation of bone protecting genes appear to be involved. Further studies are warranted.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.357-367
• /
• 2001

The purpose of this study was to investigate the alveolar bone turnover in diabetic rat, and to compare the alveolar bone turnover during tooth movement in diabetes with that in normal control Eighty Male Sprague-Dawley strain rats(8th week) were divided into normal control(N), normal-tooth movement (N-tm), diabetes(D), and diabetes-tooth movement(D-tm) groups. Eighteen days before the start of the experiment, diabetes was induced with a single injection of streptozotocin 50 mg/kg of body weight in citrate buffer as vehicle via the tail vein. Maxillary first molars of rats were moved mesially by 40 grams of the closed coil spring. Experimental animals were sacrificed after 1d, 3d, 7d, and 14d experimental period, and the alveolar bone around the maxillary first molars were assayed biochemically for acid phsophatase(ACP) and tartrate-resistant acid phosphatase (TRAP) as bone resorption markers, and alkaline phosphatase(ALP) and osteocalcin(OC) as bone formation markers. TRAP and OC concentration in serum and alveolar bone of D group were lower than those in N group, and especially OC concentration decreased mote following diabetes prolonged, which showed the decreased skeletal and alveolar bone resorption and formation potential in diabetic rats. In N-tm group compared with N group, alveolar bone ACP and TRAP concentrations were highest at 1d and 3d(p<0.01), decreased after then, and showed lowest at 14d, and alveolar bone OC concentration was higher at 3d, 7d, and 14d(p<0.001) and showed a tendency of peak level at 7d. which showed the peak of concentration of bone resorption markets at 1d-3d and those of bone formation markers at 7d. In D-tm group compared with N group, alveolar bone ACP and TRAP concentrations were higher at 3d, 7d and 14d(p<0.001), and tended to reach peak value at 7d and persisted through 14d, and alveolar bone ALP and OC concentration increased but not different from that of N group. The amount of tooth movement in D group were greater than that of N group at all experimental period. Those results were suggested that during diabetes, the alveolar and skeletal bone undergo low bone turnover and the mote amount of tooth movement, hut because the peak time of alveolar bone resorption activity was delayed and sustained in longer period of tooth movement and alveolar bone formation activity is lower than that of normal tooth movement, the periodontal space is supposed to be larger doting tooth movement.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.