• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.445-449
• /
• 2009

Purpose: A successful surgical treatment for a wide alveolar cleft with bone graft is difficult to achieve due to several factors such as the limitation of gingivoperiosteal flap, the presence of large scar tissues, and the poor blood circulation. To overcome these problems, alveolar distraction osteogenesis using Liou alveolar distraction device was applied. We analyzed the consequences of this surgical treatment. Method: Between 2006 January and 2007 August, we have conducted analysis on the methods and consequences of Liou alveolar distraction osteogenesis for 6 patients. The age of patients was 12 years and 6 months in average. The follow up period was 19 months in average. The Reverse L osteotomy followed by the placement of the Liou alveolar distraction device was performed. After serial distraction, the distractor was removed after 5 months of the process of osteogenesis, and the result was analyzed using the computed tomography and the x-ray films of the alveolar bone and the teeth. Results: The alveolar cleft with 12.5 mm in average width was filled with 8.5 mm of newly formed bone tissue in average width after 5 months of osteogenesis. Among the 6 cases, 5 required the additional bone graft and 1 case only required the gingivoperioplasty. The newly formed bone tissues did not show any signs of bone resorption. However, a considerable degree of teeth displacement was shown. Conclusion: For the alveolar cleft too wide to be reconstructed by a general bone graft, it is strongly recommended to perform the reverse L osteotomy of the cleft side with Liou alveolar distraction device to initiate the alveolar osteogenesis. However, the migrated teeth showed some degree of relapse, thus, the orthodontic treatment is essential following the distraction osteogenesis treatment.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권4호
• /
• pp.329-338
• /
• 2006

Objectives: Distraction osteogenesis has recently evolved a challenging technique to overcome the limitations of conventional augmentation procedures. The aim of this report was to evaluate the clinical result of alveolar distraction osteogenesis for implant installation. Methods: Twenty five patients with alveolar ridge deficiencies were treated with vertical alveolar distraction osteogenesis by intraoral device (total 27 devices: 25 extraosseous and 2 intraosseous devices). After the latency periods of 5-7 days, activation of the device was started. The distraction rhythm and rate was 0.75-1.0 mm a day with 2 or 3 times a day. After 3-4 months, dental implants were placed with removing the distractor simultaneously. Results: On average, a vertical gain of $9.8{\pm}3.4\;mm$ was obtained by distraction osteogenesis. Total 84 implants were installed. Average follow up period was $13.5{\pm}7.5$ months. No implant was removed during the follow up period. Three patients showed infection during the distraction osteogenesis. Three devices were broken and 2 devices among them were replaced with new one. Conclusion: Relatively larger amount of alveolar bone augmentation could be obtained with distraction osteogenesis. For the ideal anatomically and functionally ideal regeneration of alveolar bone to install dental implant, the complication of distraction should be controlled.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.325-329
• /
• 2009

Objective : This is to report the effectiveness of intraoral distraction osteogenesis, iliac bone graft for alveolar augmentation in the extremely atrophied alveolar defects after infected allobone grafted area. Subjects and Methods : Anterior segmental osteotomy was performed and the trans-oral alveolar distractors (Martin, Germany) were applied in patient with the severe acquired anterior mandibular and mandibular defect after ameloblastoma enucleation. Iliac bone grafts were performed in defect sites and distraction osteogenesis were treated. After latent period for 1 week, the osteomized alveolar segments were distracted by 0.75 mm a day (0.25 mm/1 turn) for 10 days The consolidation period was about 12 weeks. Thereafter, 2 titanium threaded implants were simultaneously installed with removal of distractor. For oral rehabilitiation, The implants were installed in maxilla, mandible. It was tested with clinically and radiographically. Results : Amounts of acquired alveolar bone were 10 mm with the increased width of the ridge crests and soft tissue expansion. Dental implants installated on the augmented alveolar ridges in 12 weeks after distraction were confirmed as in good osseointegration and in good function without any complications. Conclusion : Intraoral distraction osteogenesis can be a good option for alveolar ridge augmentation of the severely atrophied ridges and soft-tissue defects.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권4호
• /
• pp.326-329
• /
• 2002

저자들은 위축된 치조골과 외상 또는 종양으로 상실된 치조골의 재건을 위하여 수직적 치조골 신장술을 이용하여 104명의 환자에서 평균 10.2 mm의 치조골을 신장시킬 수 있었으며, 양호하게 재건된 치조골에 치과 임플란트를 식립함으로서 기능적, 심미적으로 좋은 결과를 얻을 수 있었다. 치조골 신장술은 기존의 치조골 수복술들을 대체할 수 있는 안전하고 효과적인 방법으로 생각된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.495-499
• /
• 2008

For the successful placement of dental implants, adequate alveolar bone height and width are required. Alveolar distraction osteogenesis is an effective method that resolves insufficient alveolar bone height for dental implant placement, and thus has been clinically applied with satisfactory results. But, minor and major problems may occur during the treatment. In the following report, we studied for such problematic cases. The problems are as follows: 1) sharp edges of the transport segment, 2) infection, 3) soft tissue dehiscence, 4) limitation of distraction, 5) numbness, 6) insufficient bone formation. But, most of them were answered by simple solutions and did not jeopardize the final outcomes. Distraction osteogenesis can be considered a safe and predictable procedure for lengthening the alveolar bone.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권5호
• /
• pp.421-428
• /
• 2011

Introduction: The purpose of this study was to evaluate the clinical result of vertical alveolar distraction, especially the distracted alveolar bone and installed implants. Materials and Methods: Twenty-one patients who have been received the vertical alveolar distraction and implant installation on 22 areas (3 maxilla and 19 mandible) using intraoral alveolar distraction device were examined. After consolidation period of 3-4 months, distraction devices were removed and 91 implants were installed in the distracted alveolar bone. The distracted bone and implants were evaluated clinically and radiographically. Results: Mean height of distracted alveolar bone was $7.5{\pm}3.2$ mm (range: 2.5-15.0 mm). Mean follow-up period after completion of the distraction was 3.1 years (range: 1.4-11.5 years). Mean resorption of distracted alveolar bone was $1.6{\pm}1.8$ mm. The success and survival rates of implants was 95.3% and 100%, respectively. Conclusion: Results of this study indicate that vertical alveolar distraction procedure is a useful and stable method for alveolar ridge augmentation and implantation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권6호
• /
• pp.526-531
• /
• 2005

Distraction osteogenesis is a technique of bone lengthening by gradual movement and subsequent remodeling. Distraction forces applied to bone also create tension in the surrounding soft tissues, distraction histiogenesis. Distraction osteogenesis is used to correct facial asymmetry, such as patients with hemifacial microsomia, maxillary or mandibular retrusion, cleft lip & palate, alveolar defect and craniofacial deficiency. Hemifacial microsomia is characterized by unilateral facial hypoplasia, often with unilateral shortening of the mandible and subsequent malocclusion. This report describes two cases of hemifacial microsomia(type IIB). In these two cases, distraction osteogenesis was used to correct a facial asymmetry. Two patients underwent unilateral mandibular distraction osteogenesis of ascending ramus of the mandible with extraoral devices. Successful distraction osteogenesis was achieved in the patients with hemifacial microsomia.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권5호
• /
• pp.415-423
• /
• 2005

Distraction osteogenesis (DO) is frequently used technique in reconstruction of bony defects resulted from tumor resection, congenital deformity, and trauma in the maxillofacial region. Although the histologic and ultrastructural changes associated with distraction osteogenesis have been extensively described, the exact changing of the surrounding tissues, such as nerve tissues, were still unclear. This study observed the histological changes and the expression of nerve growth factor (NGF) in the inferior alveolar nerve (IAN) after distraction osteogenesis. Unilateral mandibular distraction (0.5 mm twice per day for 10 days) was performed in eight mongrel dogs. Two animals were sacrificed at 7, 14, 28 and 56 days after completion of distraction, respectively. The distracted IAN and contralateral control nerve were harvested and processed for histological and innunohistochemical examinations. The signs of acute nerve injuries, such as demyelination and partial discontinuation of nerver fiber, were observed in the distracted IAN on 7 and 14 days after distraction. The initial remyelination and regeneration of distracted IAN were showed at 14 days after completion of distraction. At 56 days later, the histologic features of distracted IAN was similar to those of the normal control IAN. The expression of NGF was significantly increased in most distracted nerve tissues on 7, 14 and 28 days after distraction. On 56 days after distraction, the expression of NGF returned to the normal level. This study suggested that the acute IAN injury caused by mandibular distraction were mostly recovered during consolidation period. The NGF was seemed to be induced from Schwann cell and damaged nerve tissues, and it may have important roles in the initial healing of damaged nerves.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권5호
• /
• pp.459-466
• /
• 2010

Alveolar distraction osteogenesis (ADO) has been regarded as an acceptable treatment for the alveolar bone deficiency. For ADO at anterior maxillary area, the vector should be oriented to forward and down-ward direction to get an adequate occlusion with mandibular teeth and to increase bone length and width for implant placement. However, the conventional commercial distraction devices for ADO are designed to allow mainly downward movement of alveolar segment, even though a forward movement can be obtained a little by controlling of inclination of device. To make ADO with controllable bidirectional vector possible, we used customized devices using self-manufactured ABDUL (Alveolar Bone Distractor Using Lag screw principle) and commercial orthodontic palatal expansion device ($Hyrex^{(R)}$). In all cases (n = 4), ADO could be performed successfully and dental implants were able to placed with adequate occlusion. We report the procedures, advantages and disadvantages of these methods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권3호
• /
• pp.242-246
• /
• 2006

Objective : This is to report the criteria of success of intraoral distraction osteogenesis for alveolar augmentation in the severely atrophied alveolar defects through clinical result of 2 cases. Subjects and Methods : Anterior segmental osteotomy was performed and alveolar distractors (Martin and Leibinger, Germany) were applied each in 2 patients with severely defected anterior maxillary area. The osteomized alveolar segments were distracted by 1mm a day after latency period. After the consolidation period implants were installed with removal of distractor. The implants were evaluated clinically and radiographically. Results : In Case I, the distracted bone was directed to the palatal side, and another augmentation treatment - block bone graft, guided bone regeneration - was needed. In Case II, the successful alveolar bone augmentation was achieved. Dental implant was placed on distracted alveolar bone, and showed good osseointegration and good function without any complication. Conclusion : Distraction osteogenesis can be a good choice for alveolar ridge augmentation of severely atrophied ridges. However, the anterior esthetic prosthetics relies on the control of the vector, the kind of distractor, the healing capacity of patient and the etiology of atrophy. Therefore another study of each category would be needed.