• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.432-434
• /
• 2009

Metal nano-wire arrays on Cu-coated seed layers were fabricated by aqueous solution method using sulfate bath at room temperature. The seed layers were coated on Anodic aluminum oxide (AAO) bottom substrates by electrochemical deposition technique, length and diameter of metal nano-wires were dominated by controlling the deposition parameters, such as deposition potential and time, electrolyte temperature. Anodic aluminum oxide (AAO) was used as a template to prepare highly ordered Ni, Fe, Co and Cu multilayer magnetic nano-wire arrays. This template was fabricated with two-step anodizing method, using dissimilar solutions for Al anodizing. The pore of anodic aluminum oxide templates were perfectly hexagonal arranged pore domains. The ordered Ni, Fe, Co and Cu systems nano-wire arrays were characterized by Field Emission Scanning Electron Microscopy (FE-SEM) and Vibrating Sample Magnetometer (VSM). The ordered Ni, Fe, Co and Cu systems nano-wires had different preferred orientation. In addition, these nano-wires showed different magnetization properties under the electrodepositing conditions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.460-466
• /
• 2021

The purpose of this study was to compare the effect of the hemostatic agent containing aluminum chloride with hemostatic agent containing ferric sulfate on the shear bond strength of resin-modified glass ionomer cement(RMGIC) to dentin in primary tooth. Twenty extracted non-carious human primary teeth were collected in this study. The specimens were cut to expose dentin and polished. The specimens were randomly seperated into 3 groups for treatment; group I: polyacrylic acid(PAA), RMGIC; group II: aluminum chloride, PAA, RMGIC; group III: ferric sulfate, PAA, RMGIC Ten specimens from each group were subjected to shear bond strength test. The mean shear bond strength of each group was as follows: 10.07 ± 1.83 MPa in Group I, 7.62 ± 0.78 MPA in group II, 5.23 ± 0.78 MPa in group III. There were significant differences among all groups(p < 0.001). In conclusion, both aluminum chloride hemostatic agent and ferric sulfate hemostatic agent decreased the shear bond strength of RMGIC to dentin. And ferric sulfate hemostatic agent decreased the shear bond strength of RMGIC more than the aluminium chloride hemostatic agent.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.239-244
• /
• 1999

aluminum sulfate (alum) as a representative retention aid in papermaking processes was added to pulp suspensions, and the aluminum components adsorbed on the pulp were investigated quantitatively by two types of X-ray elementary analyses with regard to simultaneous changes of their surface charges. X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence analysis (XFA) were applied to determine the aluminum components retained in pulp pads up to ca. 10 nm and 100${\mu}$m depth, respectively. In other words, XPS was utilized to analyze the outermost surface layers of the samples, and XFA was available for measurement of their extensive regions. A particle charge detector (PCD) was used to monitor streaming potentials at various pHs of the pulp mixtures under moderate sharing conditions. At pH 4.5 of pulp suspensions containing alum, surface charges of pulp fibers varied from negative to slight negative (approximately neutral) according to adsorption of aluminum components onto the pulp fibers. Subsequently, when a dilute NaOH solution in limited amounts was added to pulp mixtures, both streaming potentials and surface aluminum content of the pulp fibers increased distinctly although little total aluminum retention increased. Further addition of alkali solutions brought drastic decreases of the surface charges and surface aluminum content, while total aluminum content, on the contrary, increased gradually under neutral conditions. These results indicate that residual aluminum ions remained in pulp suspensions are predominantly adsorbed on surfaces of pulp fibers by adequate alkali additions and they must sufficiently cationize the fiber surfaces with increases of somewhat cationic aluminum complexes formed on the surfaces. On the other hand, aluminum components formed in higher pH ranges have nearly no contribution to improvement of charge properties of the pulp fiber surfaces, even though aluminum retention in pulp pads increases. XPS and XFA analyses combined with streaming potential measurement using a PCD suggest close relationships between aluminum content on the pulp fiber surfaces and their charge properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2321-2327
• /
• 2015

Three coagulants, alum sulfate(alum), poly aluminum chloride(PAC) and poly aluminum silicate chloride (PASC), were used to remove low to high turbidity and TOC in surface and ground blended water. Laboratory experiments and pilot plant experiments were carried out to evaluate the optimal coagulant and its dosage. To determine the optimized coagulant and its dosage, the turbidity, TOC and pH were measured. The experimental results showed the best removal performance using PASC. The optimal dosage of PASC between 3-20 NTU was found to be 15 mg/L in the jar test. In the pilot test, a 15 mg/L PASC dosage was applied and resulted in the efficient removal of turbidity and TOC between 3.6-27 NTU. The removal efficiency of PASC increased with increasing turbidity and TOC.

• Korean Journal of Environment and Ecology
• /
• v.7 no.1
• /
• pp.6-9
• /
• 1993

To examine aluminum toxicity on woody plants, Forsythia koreans and Platanus occidentalis cuttings were grown in the pot(48$\times$33$\times$9cm) filled with sand, and treated aluminum solution and ground water (pH 6.75) 3times per week from April 28, 1993 to June 16. Aluminum solution were prepared 1.0, 2.5 and 5.0mM aluminum potassium sulfate, dilulted with ground water. Growth-related characters (Shoot growth, leaf number and leaf chlorophyll content ) and root growth were measured and compared among the treatments. In all growth-related characters(Shoot growth, leaf number and leaf chlorophyll content), differences among the treatments were highly significant. In root growth, differences among the treatments were highly significant for Forsythia koreana cuttings, but not for Platanus occidentalis cuttings.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1414-1417
• /
• 2000

This study was to investigate effects of the supplementation of the different lactic acid bacteria[Streptococcus thermophilus KCTC 2185 culture group(ST), autoclaved Streptococcus thermophilus KCTC 2185 culture(STS), Lactobacillus acidophilus ATCC 4356 culture group(LA) and autoclaved Lactobacillus acidophilus ATCC 4356(LAS)] on suppression of aluminum accumulation in organs of rats fed with the diet containing $250\;{\mu}g/g$ aluminum sulfate for 4 weeks. Amount of aluminum accumulation in the control rat was in order of bone>lung>heart>large intestine>kidney>liver>brain>small intestine. Effects of reduction of aluminum accumulation by feeding of the four difference fermented milk were in order of LA group>LAS group>ST group>STS group. ST and LA both were more effective than STS and LAS. Ultimately fermented milk was useful in reduction of toxication by accumulating of aluminum in vivo.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.129-137
• /
• 2000

Silk fabrics were dyed by Cochineal extracts after mordanted with various mordants and their properties of dyeing, fastness and change of surface color were investigated. Silk fabrics were mordanted with aluminum potassium sulfate, copper acetate, tin chloride, iron sulfate or chromium potassium sulfate at $60^\circ{C}$ for 30 minutes and subsequently dyed at $60^\circ{C}$ for 60 minutes unless mentioned otherwise. The dye-uptake of silk fabrics increased with the concentration of Cochineal extracts and mordants used. Maximum dye-uptake was obtained at pH 3.5-4, regardless of the type of mordants used. Surface color of silk fabrics changed from red purple to purple when mordanted with Al or Cu mordant, from purple to purple blue with Fe mordant and showed red purple with Sn or Cr mordant, respectively. It also changed according to pH of dyeing bath. Dyed silk fabrics showed poor light fastness but good dry-cleaning, perspiration and rubbing fastness.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.129-130
• /
• 2021

In order to solve the problem of low early-age compressive strength of high volume fly ash concrete. This paper studies the effect of 2% sodium sulfate (Na₂SO₄) as a chemical activator on the paste with 40% fly ash content and a water-binder ratio of 0.30. The results indicate that the addition of Na₂SO₄ can effectively improve the early-age compressive strength of the fly ash-cement system, and the strength improvement rate on the first day reached nearly 70%. In addition, calorimetric analysis reveals that the incorporation of Na₂SO₄ promotes the early hydration of cement and fly ash, increases the cumulative hydration heat and delays the heat peak of the aluminum phase.

• Journal of Environmental Health Sciences
• /
• v.17 no.1
• /
• pp.67-73
• /
• 1991

In this study are investigated to the optimal coagulation conditions and magnetite which was used as coagulation-aids. To accomplish this study, analysis of water quality, removing tubidity and SS from wastewater were measured with jar-tester. The results were obtained that waste water requires 10g magnetite, 100mg aluminum sulfate, and pH valuse was 6~9.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.28.1-28
• /
• 2000