• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.58-58
• /
• 1994

슬립캐스팅법으로 제조한 튜브형 $\alpha$-알루미나 담체 (평균기공크기 = $0.1 \mum$)에 졸-겔 침지코팅(dipcoating) 또는 가압코팅 (pressurized coating) 법에 의하여 극미세입자 $\gamma$-AlOOH, $TiO_2, SiO_2$, 및 aluminosilicate diphasic 졸을 코팅한 후 300 ~ 500$\circ$C 에서 열처리하여 세라믹 복합막을 제조하였다. 복합막 전체에 대한 균열유무는 $N_2$ 기체투과율의 평균압력에 대한 의존성으로부터 평가하였으며, 한외여과 (ultrafiltration)에의 응용성을 규명하기 위하여 막의 재질 및 제조조건에 따른 polyethylene glycol (PEG) 수용액의 분획분자량 변화를 측정하였다. 합성 세라믹 복합막의 분획분자량 측정 결과 $SiO_2$의 경우 2,000 정도로 매우 우수하였으며 $\gamma-Al_2O_3, TiO_2$, 그리고 aluminosilcate 막들은 6,000 ~ 10,000 범위 값을 갖고 있었다. 또한 막의 기공크기 및 분획분자량을 제어하기 위한 방법으로서 $TiO_2$ 복합막을 300 ~ 700$\circ$C 에서 열처리하였으며 이들에 대한 분획분자량 변화를 비교 분석하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.57-57
• /
• 1994

졸-겔 침지코팅 (dipcoating) 또는 가압 졸-겔 코팅 (pressurized coating) 법으로 제조한 $\gamma-Al_2O_3, SiO_2, TiO_2$ 및 aluminosilicate 복합막에 대하여 $CO_2$, He, $N_2$, 및 $O_2$ 기체 투과율과 $CO_2$ 분리계수를 측정하였다. 이들 막을 통한 모든 기체의 이동은 Knudsen 유동이 지배적이었으며 $CO_2/N_2$의 분리계수는 0.9 ~ 1.1 정도로 Knudsen 분리계수 ($CO_2/N_2$의 경우 0.8)보다 약간 높은 값을 보여주었다. $CO_2$ 분리계수를 향상시키기 위하여 silane coupling 및 산화물 도핑법에 의한 복합막의 표면개질을 시도하였으며 분리막의 재질 및 표면개질 조건에 따른 $CO_2/N_2$ 분리계수 변화를 측정 비교하였다. Silane coupling에 의한 표면개질이 $CO_2$의 표면 친화성 (affinity)에 의한 표면확산속도를 증가시키기 때문에 $CO_2$ 분리에 있어서 산화물 도핑에 의한 표면개질보다 더욱 효과적이었다.

• Journal of Information Display
• /
• v.13 no.3
• /
• pp.97-100
• /
• 2012

We have conducted two kinds of the so-called charge-compensated aliovalent element substitutions to control the photoluminescence properties of $NaAlSiO_4:Eu^{2+}$ with a special focus on the enhancement of the excitation intensity at 400 nm. The aliovalent element substitutions include cation-cation and cation-anion co-substitutions according to the general formulas $Na_{1-x}M_xAl_{1+x}Si_{1-x}O_4:Eu^{2+}$ and $Na_{1-x}M_xAlSiO_{4-x}N_x:Eu^{2+}$ (M = $Mg^{2+}$, $Ca^{2+}$, and $Sr^{2+}$), respectively. The increase in the relative excitation intensity at 400 nm has been achieved in both types of the co-substitutions. Thus, the present research has demonstrated the effectiveness of the charge-compensated element substitution.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1011-1019
• /
• 1990

Pyrophyllite, which has low impurities, was used in the synthesis of mullite to decrease the glass phase, which can be formed from impurities such as alkali and alkali earth elemetns present in raw materials. But, as pyrophyllite has less alumina content than other aluminosilicate materials such as kaolin, more alumina sources were needed in the synthesis of mullite. In other to investigate the effect of particle size of alumina sources on the mullitization of pyrophyllite, aluminum hydrate gel and activated alumina were used. When activated alumina, which has large particle size, was added to pyrophyllite, mullitization was not fully accomplished regardless of temprature. In the case of aluminum hydrate gel, which has small particle size, the maximum yield of mullite was about 90.3% at 1700$^{\circ}C$, and grain size of mullite was larter than the case of activated alumina was added.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.365-372
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and Li-salt with H2O in alcohol (EtOH+2-Propanol) medium. Effects of important reaction parameters on the properties of sol and gel-derived LAS were examined. The crystallization of the sol-gel derived LAS with ${\beta}$-spodumene composition began at ∼600$^{\circ}C$, and a series of polymorphic transformations occurred as temperature was increased to 1100$^{\circ}C$: amorphous LAS\longrightarrowhexagonal LiAl(SiO3)2\longrightarrow${\beta}$-spodumene. Lowering Li content in the gel enhanced densification and retarded the crystallization significantly. Optimum reaction conditions of LAS sol formation for thin coating applications were derived from rheological measurements, and these can be summarized as: H2O/total alkoxides molar ratio=4, pH=∼2.5, and aging time of ∼250h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.544-547
• /
• 1999

To develop the better insulants. the zeolite particle, which is aluminosilicate mineral, was filled In the DGEBA/MDA/SN epoxy resin system. Dynamic DSC curves of cured specimens with various contents of zeolite were observed and the glass transition temperature(T$_{g}$) was obtained. According to this result, we could carry out the experiment concerned with the dielectric breakdown strength around T$_{g}$ and find the limit temperature for the application of the DDEBA/MDA/SN system filled with natural zeolite. T$_{g}$ increased with the content of zeolite. As the temperature increased, the dielectric breakdown strength decreased rapidly, in the region of T$_{g}$. At the high temperature, the deterioration by electrical stress was activated. The diameter of puncture at the high temperature was larger 7han that at the room temperature.erature.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.145-151
• /
• 2014

The glass used for mobile display windows is required to have high strength. Chemical strengthening by means of ion exchange is widely used glass. The depth of the layer and the compressed stress are affected by tempering temperature and time. The purpose of this study is to investigate the range of DOL and CS, which to less breakage during reliability tests such as the ball drop test, hole drop test, 3-point bending test, drop test, and tumble test with Soda-lime Glass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1231-1234
• /
• 2003

A sample procedure has been described to room temperature synthesis, mesoporous aluminosilicate materials with strong surface acidity by using a cationic surfactnat cetyltrimethylammonium bromide(CTABr) as the template agent. All samples were charecterized by X-ray diffraction(XRD) and nitrogen adsorption. The crystallinity and surface area of MCM-41 type aluminosilicats decrease with decreasing of Si/Al ratio. The influence of the aluminum contents of MCM-41 on the coordination of Al and on the acidity is studied by $^{27}Al$ MAS NMR and temperature programmed desorption of ammonia(TPD). It was shown that the incorporation of Al atoms into the framework causes increasing of acid site surface. And then Al atoms in the framework were incorporated tetrahedrally in structure, which gave a rise to cationic sites in the framework.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.10
• /
• pp.1049-1051
• /
• 2000

A chromia-pillared clay has been prepared by ion exchange type intercalation reaction between the sodium ion in montmorillonite and the trimeric chromium oxyformate (TCF) ion, and by subsequent heat-treatment. The structural and thermal properties have been systematically studied by thermal analysis, powder XRD, IR spec-troscopy, and XAS. The gallery height of~6.8 $\AA$ upon intercalation of the TCF ion suggests that the $Cr_3O$ plane is parallel to the aluminosilicate layers. Even though the basal spacing of TCF intercalated clay decreases slightly upon heating, the layer structure was retained up to $550^{\circ}C$ as confirmed by XRD and TG/DTA. Ac-cording to the EXAFS spectroscopic analysis, it is identified that the (Cr-Cr) distance of 3.28 $\AA$ between vertex-linked CrO6 octahedra in TCF splits into 2.64 $\AA$, 2.98 $\AA$, and 3.77 $\AA$ due to the face-, edge-, and corner-shared CrO6 octahedra after heating at $400^{\circ}C$, implying that a nano-sized chromium oxide phase was stabilized within the interlayer space of clay.