• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.823-832
• /
• 2004

Atmospheric aerosol particles collected in Seoul on four single days, each in every seasons of 2001, were characterized and classified on the basis of their chemical species using low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA). Low-Z particle EPMA technique can analyze both the size and the chemical species of individual aerosol particles of micrometer size and provide detailed information on the size distribution of each chemical species. The major chemical species observed in Seoul aerosol were aluminosilicate, silicon dioxide, calcium carbonate, organic, carbon-rich, marine originated, and ammonium sulfate particles, etc. The soil originated species, such as aluminosilicate, silicon dioxide, and calcium carbonate were the most popular in the coarse fraction, meanwhile, carbonaceous and ammonium sulfate were the dominant species found in the fine fraction. Marine originated species such as sodium nitrate was frequently encountered, up to 30% of the analyzed aerosol particles.

• Bulletin of the Korean Chemical Society
• /
• 제8권3호
• /
• pp.155-157
• /
• 1987

Parameters of intraframework potential function suitable for aluminophosphate-5($AIPO_4-5$) are obtained by the constraint method. Using these parameters, we calculated the stabilization energies and their second derivatives of framework atoms and these values are compared with those of zeolite A. It is found that the oxygen atoms in $AIPO_4-5$ framework are more stable than those of zeolite A and that the aluminum atom is also more stable than that of zeolite A. On the other hand, the phosphorus atom in $AIPO_4-5$ framework, in which the silicon atoms of aluminosilicate are replaced by the phosphorus atom, is less stable than the silicon atom of aluminosilicate framework of dehydrated zeolite A.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.199-200
• /
• 2017

• Journal of the Optical Society of Korea
• /
• 제17권2호
• /
• pp.182-187
• /
• 2013

We present a comparative experimental analysis of the thermal spectroscopic characteristics of a phosphosilicate (P)-based ytterbium-doped fiber (YDF) against an aluminosilicate (Al)-based YDF in the temperature range of 25 to $150^{\circ}C$. We also characterize the fibers as gain media in a cladding-pumped amplifier configuration. While both fibers exhibit comparable trends in their thermal characteristics, there are noticeable distinctions in the fluorescence lifetime reduction rate and the spectral dependence of the transition cross-sections. The P- and Al-based YDFs present thermal lifetime reduction rates of $0.012%/^{\circ}C$ and $0.026%/^{\circ}C$, respectively. In particular, in the spectral region at ~940 nm, the absorption cross-section of the P-based YDF undergoes significantly less thermal change compared to that of the Al-YDF. In the cladding-pumped amplifier configuration operating at a total gain of 10 dB, the Al-based YDF generally performs betters than the P-based YDF in the temperature range of 25 to $75^{\circ}C$. However, it is highlighted that in the high temperature range of over $75^{\circ}C$, the latter shows a less gain reduction rate than the former, thereby yielding higher relative output power by 3.3% for a 1060-nm signal, for example.

• Korean Chemical Engineering Research
• /
• 제54권5호
• /
• pp.712-718
• /
• 2016

Y 제올라이트로부터 합성한 메조 포러스 물질을 지지체로 사용한 백금 촉매를 n-octadecane의 수첨업그레이딩 반응을 통한 항공유 제조에 적용 하였다. Y 제올라이트를 골격 구성물질로 사용하여 메조 포러스 알루미노실리케이트($MMZ_{HY}$)를 합성 하였다. $Pt/MMZ_{HY}$ 촉매상에서 Mg 첨가가 n-octadecane의 수첨업그레이딩 반응에 미치는 영향을 고찰 하였다. 촉매의 특성은 X 선 회절, 질소 흡착, 승온환원, 암모니아승온탈착 및 흡착 피리딘 적외선 분광법으로 수행 하였다. 본 연구에서 Mg가 2 wt% 첨가된 $Pt/MMZ_{HY}$ 촉매가 가장 높은 항공유 수율을 보였는데, 이는 Mg의 첨가에 의해 Pt금속의 분산도와 환원도가 증가할 뿐만 아니라, 산점의 양과 세기가 증가하기 때문이다. 또한 $PtMg/MMZ_{HY}$ 촉매 상에서 이소 파라핀에 대한 선택도가 80 % 이상임을 확인하였다.

• 대한환경공학회지
• /
• 제29권7호
• /
• pp.810-819
• /
• 2007

물유리와 수산화나트륨 용액을 이용하여 플라이 애쉬와 고로슬래그의 알칼리 활성에 관한 연구를 수행하였다. 플라이 애쉬/슬래그 시멘트 페이스트(FSC)의 반응생성물과 미세구조를 관찰하기 위하여 XRD, FTIR, $^{29}Si$ and $^{27}Al$ NMR, TGA and SEM 분석을 수행하였다. 무정형 상태 또는 저급 결정구조를 가진 calcium silicate hydrate와 aluminosilicate 겔이 각각 고로슬래그와 플라이 애쉬의 알칼리 활성반응에 의해 생성되었다. 실험결과, 물유리 모듈 1.0과 1.2가 플라이 애쉬와 고로슬래그의 알칼리 활성반응을 위해 적정한 것으로 나타났다. 물유리 모듈 1.0과 1.2로 알칼리 활성화된 FSC 페이스트는 플라이 애쉬와 고로슬래그의 알칼리 활성반응에 의해 생성된 겔 형태의 반응생성물과 물유리에 의한 또 다른 수화물(즉 실리카겔)에 의해 좀 더 단단하고 연속적이 모체가 형성되었음을 보여주었다.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.488-493
• /
• 2010

Geopolymer is a term covering a class of synthetic aluminosilicate materials with potential use in a number of areas, but mainly as a replacement for Portland cement. In this study, geopolymers with fly ash and meta kaolin were prepared using KOH as an alkali activator and water glass. The effect of water glass on the microstructures and the compressive strength of the geopolymer was investigated. As the amount of water glass increased, the dissolved inorganic binder particles in the geopolymers increased due to polymerization, resulting in a dense microstructure. The meta kaolin-based geopolymer showed a better extent of polymerization and densification than that of the fly ash-based geopolymer. XRD data also suggested that polymerization in meta kaolin-based geopolymers should be active resulting in the formation of an amorphous phase with an increasing amount of water glass. The compressive strength of the geopolymer was also dependent on the amount of water glass. The compressive strength of the geopolymers from both fly ash and meta kaolin increased with an increasing amount of water glass because water glass improved the extent of polymerization of the inorganic binder and resulted in a dense microstructure. However, the addition of water glass to the geopolymer did not seem to be effective for the improvement of compressive strength because the meta kaolin-based geopolymer mainly consisted of a clay component. For this reason, the fly ash-based geopolymer showed a higher value of compressive strength than the meta-kaolin geopolymer.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.481-486
• /
• 2008

나트륨(Na) 함유량이 다른 세 종류의 유리관인 Borosilicate($Na_2O$ 4%), Soda-Lime($Na_2O$ 14%), 그리고 Aluminosilicate($Na_2O$ 0.06%) 유리관의 방전 실험을 통하여 유리관 내벽의 흑화를 관측하였다. 수은 혼합기체(Ne+Ar+Hg)의 방전에서 나트륨 함유량이 많은 유리관일수록 흑화가 심하게 나타난다. 무수은 가스(Ne+Ar)의 방전에서는 흑화가 나타나지 않는다. 나트륨 함유량이 많은 수은 방전 램프에서 봉입 기체의 압력이 작을수록 흑화의 정도가 커진다. 흑화 방지재를 도포한 유리관은 흑화가 미약하게 나타난다. 이 실험을 통하여 흑화는 유리재의 나트륨 성분과 수은 이온의 결합에 의한 아말감($NaHg_2$)이 유리관 내벽에 형성된 것으로 분석된다.

• 공업화학
• /
• 제9권5호
• /
• pp.615-618
• /
• 1998

수성 교질법에 의한 제올라이트 합성 과정에서 활성탄을 부가함으로써 제올라이트 결정화 과정에 미치는 영향과 활성탄 기공 내에서의 제올라이트 결정의 담지현상을 조사하였다. A형 제올라이트를 합성하기 위한 몰 조성비로 조절된 알루미노 실리케이트 겔상에 5 wt % 정도의 활성탄을 첨가할 경우에는 그대로 A형 제올라이트가 생성되었으나 15 wt % 정도 첨가할 경우에는 대부분이 X형이고 일부 A형과 P형 제올라이트가 혼재된 상태로 결정화가 일어났으며, 20 wt %이상 첨가할 경우에는 순수한 X형 제올라이트가 생성되었다. 활성탄의 기공 입구와 내부에는 $1{\mu}m$ 이하의 미세한 제올라이트 결정들이 서로 엉겨붙어 있는 형태로 관찰되었으며, 기공분포 및 입도분포 결과로부터 단순히 제올라이트와 활성탄의 혼합물 형태가 아니라 활성탄 기공 내에 미세한 제올라이트 결정들이 담지되어 있는 복합 소재임을 확인하였다.

• Advances in concrete construction
• /
• 제13권1호
• /
• pp.71-81
• /
• 2022

Aluminosilicate materials as precursors are heterogenous in nature, consisting of inert and partially reactive portion, and have varying proportions depending upon source materials. It is essential to assess the reactivity of precursor prior to synthesize geopolymers. Moreover, reactivity may act as decisive factor for setting molar concentration of NaOH, curing temperature and setting proportion of different precursors. In this experimental work, the reactivities of two precursors, low calcium (fly ash (FA)) and high calcium (ground granulated blast furnace slag (GGBS)), were assessed through the dissolution of aluminosilicate at (i) three molar concentrations (8, 12, and 16 M) of NaOH solution, (ii) 6 to 24 h dissolution time, and (iii) 20-100℃. Based on paratermeters influencing the reactivity, different proportions of ternary binders (two precursors and ordinary cement) were activated by the combined NaOH and Na2SiO3 solutions with two alkaline activators to precursor ratios, to synthesize the geopolymer. Reactivity results revealed that GGBS was 20-30% more reactive than FA at 20℃, at all three molar concentrations, but its reactivity decreased by 32-46% with increasing temperature due to the high calcium content. Setting time of geopolymer paste was reduced by adding GGBS due to its fast reactivity. Both GGBS and cement promoted the formation of all types of gels (i.e., C-S-H, C-A-S-H, and N-A-S-H). As a result, it was found that a specified mixing proportion could be used to improve the compressive strength over 30 MPa at both the ambient and hot curing conditions.